Abin da kuke buƙatar sani, je kantin sayar da sabbin kayan dafa abinci? Amsoshin mahimman batutuwan da suka taso daga masu sayen.
Me yasa kuke buƙatar waɗannan ilimin? Don yin zabi mai hankali kuma kada kuyi kuskure lokacin siye, saboda dole ne kuyi amfani da kayan ado ba shekara guda. Ukukhon yana da sirrinsa game da wane tallace-tallace masu kama da su yi shuru ta hanyar kiran mu zuwa shagunan. Tabbas, wasu sassa da farko da farko na iya nuna rashin fahimta da marasa ƙarfi, amma daga gare su a kowace rana za a dogara, kuma a ƙarshe aikin aikin kayan aikin. Ba tare da yin kwatanci don kammala ɗaukar hoto na taken ba, bari muyi kokarin amsa mahimman tambayoyin da suka taso daga masu amfani.
Bari mu fara da Adov
Bayan 'yan kalmomi ga waɗanda ba su saba da tsarin zabar kayan dafa abinci ba. Kafin ku tafi cin kasuwa, kuna buƙatar auna ɗakin (ba kawai tsawon ganuwar ba, amma kuma tsayin dafaffen rufi ne da shelves zasu iya ɗauka, a inda ya fi kyau a sanya tebur ko mashaya, Ko za ku sayi kayan gini a cikin kayan aiki, da sauransu. Kitchen Kitchen yawanci ya ƙunshi ƙananan kabad da manyan kabad na farko, da kuma manyan kabeji na manyan kabeji. Kowane abu akwati ne tare da bango, sanye da kofofin, shelves ko drawers. Mafi yawan lokuta, an gina ofisbare na bene a jere, sannan kuma a ba su umarnin da counterto ɗaya. (Obllements na kawunan dafa abinci da hanyoyin shirya kayan daki "za a iya zaba mai sauki".) Sayayya mai saukar ungulu, ba za ka zabi wani abu ba ko kuma ka dace da kanka. Lokaci ne da zai zo da cikakken tattaunawa tare da mai siyarwa kuma ya tsara aikin ƙirar ƙirar, zai zama abin da aka yi amfani da shi ta amfani da ɗayan shirye-shiryen na musamman. Don haka, sojoji ne ilimi!Frosades
Waɗannan sune manyan shahararren (da gaske kuma hankali) sassan naúrar naúrar. Wannan kalmar "facade" ana kiranta duk abin da yake tare da gaban gefen kayan daki, wato, glazed, lilo, nadawa ko zamewa) da gaban kwamitin drawers. Yana da haushi wanda ke haifar da bayyanar dafa abinci kuma a lokaci guda ya ɗauki ainihin tasirin tasirin gida. Daga wane abu, ana amfani da abubuwa da kayan haɓaka a cikin masana'antar fuska, farashin duka naúrar kuma farashin kayan dafa abinci a cikin shagon yana dogaro ne sosai.
Daga ra'ayi mai zurfi na ra'ayi, ana samun fannoni galibi cikin nau'ikan biyu: m da tsarin aiki. Na farko an yi shi ne da abu ɗaya, na biyu, wanda ya kunshi firam da saka (abin da ake kira kwamiti), daga biyu, da haɗuwa na iya zama daban. Tabbas faɗi irin nau'in ya fi kyau, ba zai yiwu ba, kowa yana da fa'idodin su. Misali, tsarin tsarin sun fi kyau a cikin cewa yana ba da damar kowane lokaci don hada kayan abu kowane lokaci (in ji shi, a cikin itacen katako mai haske, da kuma filastik na filastik). Aseue jerin gwano, bangel na gaba-yanki suna sa ya yiwu a jaddada shi a farfajiya (Matte ko mai laushi, mai santsi, mai santsi, wanda aka yi wa ado da tsarin taimako). Iri ɗaya masu sauƙi ne don kulawa da kuma amfani sosai.
Ana yin nau'ikan ɗakuna ɗaya a yawancin lokuta daga kayan Slab da MDF. Chopers na fuskantar Melamine, filastik ko Veneer. An yi amfani da murhun da aka saba don samar da nau'ikan dafa abinci, galibi ana amfani dasu don kera gidaje, wato, gefe, babba da ƙananan bangarorin kabad da ƙashi. Idan ka zabi samfurin tare da facade daga Chipboard, kula da yadda suke da kyau gefuna da gefuna. (Wannan majalisa ya dace da wadanda suka yanke shawarar adana kayayyaki masu mahimmanci ga duk wanda ba sanannen kamfani ba. A lokacin da $ 250 ga Mita na Temporon, ba za ku iya damuwa ba Game da ingancin sarrafa fadin facades, saboda tabbas sun yi ɗaya daga cikin m masana'antu masana'antu ko kan kayan aiki mai kyau a cikin Rasha, yana ba da Melamine juriya, Ikon yin tsayayya da farrasion da sauran tasirin injin. A gefuna da facades suna kusa da kullun (rauni kurkura) tare da tef ɗin PVC ko daga Mesline guda. A cewar wannan fasaha, Misali, masana'antar ta Tai da Mia (Italiya), Futura), Futura daga Edel (Russia), da kuma "Aleante" da "Clara" na masana'antar Rasha "EuroComment".
Wata hanyar samar da fadin fadin fromboard na filastik na filastik ta hanyar fasaha mai gabatarwa. Yana ba ka damar rufe Layer kariya ba kawai farfajiya na farantin ba, har ma da tsayi ɗaya ko biyu ko biyu. (Sauran ƙarshen, gami da babba da ƙananan, rufe duk garke na musamman, ana kiranta ikon ciyar da matsin lamba. Heep da aka bi da shi a cikin irin wannan hanyar suna dan kadan zagaye, santsi kuma, af, mai dadi sosai ga taɓawa. Wannan hanyar na masana'antu za a iya gane cikakke cikakke, amma bai kamata mutum ya manta cewa kowane irin rikicewa na tsarin samar da fasaha yana ƙaruwa da farashin samfurin da aka gama. Ciki har da misalai "na Fenic" daga EuroComomment, tsalle daga Eurcomomment, tsalle daga Aran, kayayyakin da aka kera a karkashin sunan sunan "Zetta kitchen".
A wasu halaye, Chipard yana fuskantar tare da lokacin farin ciki mai tsayayyen zafi (ana kiranta facade). Achetoba yana da kyau gefuna gefuna, yi amfani da bayanin martabar aluminum. Sakamakon sakamako ne na kayan ado na sabon abu. A cewar wannan fasaha, "Vio Viola-m" daga "Resource", Russia (alama Giulia Novars), da wasu samfuran kirkirar gida "Atlas-Suite". KSLOV, a cikin ƙarfe gefen, wanda ke zagaye gefen facade, da farko gilashin: m, matte, matattara, an yiwa zane-zane ko wani.
Da yawa daga cikin facade, a cikin masu kera na katako, a zahiri ana yin su ne da venauki tare da kauri daga cikin katako tare da tsintsiya. Mafi yawan lokuta, ana amfani da nau'ikan ƙwararrun masu mahimmanci don ƙarewa: goro, ceri, itacen oak, don haka farashin waɗannan firgita, saboda $ 1,000 don mita na icipton. (Sampling na Cherries na zaki suna fuskantar bangarorin gaba na tsarin masana'antar Lavinia, amma, za mu faɗi alama a cikin ARAN. .
Abubuwan gina jiki na biyu da aka yi amfani da su don ƙirƙirar kitchen verades shine MDF. Babban fa'idodin wadannan fale-falen karfi ne na karfi, danshi juriya, daidaituwa da tsattsauran ra'ayi, saboda an yi su ta hanyar latsa mai kyau itace ba tare da amfani da masu guba ba. MDF yana fuskantar fim ɗin PVC ko murfin enamel ko fenti da lacquer. Fim ya kammala a matsayin mafi sauƙin fasaha shine mafi tattalin arziki. Za'a iya samun kitchens tare da facade daga MDF / PVC a cikin samfurin kasuwancin da ke cikin gida ", prs, samfurin" na 'yan kasuwa ", samfurin" masana'antar Rusawa "), masana'antar Rusawa "Classic -Mabel" ("Hyacinth", "Orchid" da "Melissa").
Ferades daga MDF galibi ana rufe fenti ko enamel. Fors na iya zama mai santsi ko taimako (don ƙirƙirar tsagi na ado, an sanya faranti don milling), matte ko mai girman kai- dangane da nawa kuma abin da ake amfani da shi da yawa. Da ƙarin yadudduka, mafi tsada. Neman lokuta akan factada mai kyau har ma an sami sakamako na madubi (Waɗannan wasu wasu samfuran masana'antar Jamus-Rasha "mai salo"). Musamman da yawa lacquered dafa abinci a cikin jerin gwanon masana'antar Czech (Halina, Pregres, da sauransu). Ciki daya ko biyu tare da fentin fentin da kuma lacquered fentin masana'antu: elt shine Federica, daga "Edel-Camchen" ne Aran- Clattilla, a karkashin alama Zamani.
MDF faranti suna ba mu damar samar da firgima ba factading na talakawa, amma kuma convex ko convex ko concave (don wannan masana'anta, hakika, ya kamata su sami kayan aiki na musamman). Yawancin lokaci, kitchens tare da tanƙwara bangon bangon gaba daga MDF ana ba da waɗancan masana'antun da kansu ke yin fansabbai. Galaxie ya shigo da Galaxie daga Hanak da Oktawa daga Forema.
A wasu halaye, ana iya samun wadatar da MDF tare da Veneer (Lortata daga Hanak; Clia daga Elt et al.). Height yana da tsada sosai, za a kashe kuɗi ba a banza ba - kayan daki tare da irin wannan facades yana da katako kuma a lokaci guda musamman m.
Tsarin frueradas kafa daga firam da mai siyar da (abin da ke ciki) na iya kunshi kayan daban-daban a cikin kowane nau'i. Ma'anar tattalin arziƙin samar da irin waɗannan samfuran - cropping da yawan kayan kuma, sakamakon haka, rage farashin samfurin ƙarshe. A mafi yawan lokuta, fasaha ta zama kamar haka (Bari tsohon kayan aikin ilimin halitta - ƙwararru na Jarida Jiki. Firam din yana fita daga cikin bayanan profile guda hudu na lokacin sauti na kayan zane-zane, a cikin tsagi na takardar takardar irin wanda aka saka. A rabo daga kauri, alal misali, shi ne: 18: 8mm. Dukkan sassan an yi su ne da abu guda, in ji tsarin katako (samfuran) Inteladh "daga cikin manyan willow;" Coloras - daga "Atlas-Suite" - daga Acacia Sassan, Iris daga Ginova, Italiya, daga Massif Cherry) ko MDF (wasu samfuran masana'antar Forema).
Amma mafi sau da yawa akan facade Akwai abu guda biyu daban-daban. Ofaya daga cikin abubuwan da suka fi dacewa da masana'antun suna kira "ArYay da Veneer", wato, an yi firam ɗin da aka yiwa ɗan sanda ɗaya ko wani yanki na itace. Ka ce, 'Yan trades na Emilia samfurin daga elt anyi amfani da tsararru da veneer na kirji; "Emma" daga "EuroComomment" - tsararren da veneer na itacen oak; Frames da bangarori na ƙirar "Latina" daga "Ial-Kucchin" (Brand prs) - Armay da Veneer Ash, toned a ƙarƙashin itacen oak. Wani sakawa na haduwa: Veneer a kan Palylene - daga duwatsu masu mahimmanci, da kuma tsari daga abin da aka yi fams - Birch, Alder, Lindens, Lindens, da sauransu). Irin wannan hade ana amfani da shi, alal misali, a cikin samfurin Edel: Fasali daga tsarin Linden, fentin a cikin launi na ceri, mai sumbata yana linted tare da cakuda da cakuda. Amma, wataƙila, haɗuwa mafi yawan kayan abu a bangarorin gaba - MDF (a liyi tare da fim ko fentin) a kusa da gurbataccen masarautar) a ciki. Ana samun samfuri tare da irin waɗannan fannoni a cikin ɓangaren kusan matakan manyan masana'antun.
Da kuma ci gaba. Zabi kayan daki don dafa abinci, ba za ku iya samun ɗan gwaji ba. A farkon lokacin, ya zama mai gaye don samar da tafinai daga abubuwa tare da frade na zane daban daban da launuka daban-daban. Ana shirye don warware matsalar don wannan batun daga "salo mai salo" masana'antu, "audu ma," Akwai damar da za a yi amfani da sabis na mai tsara kamfanin, da kayan cin abinci wanda. Ina so. Zai taimake ka kazo da wani sabon abu da ban sha'awa.
Corps
Gefe, ƙananan da manyan bangarorin kayan ɗakunan abinci (tare da togon tebur na magabatan gidaje) gakunan ajiya na 16-18mm lokacin farin ciki, an lalata su ko kuma a yi layi a Mesline. Za ku tambaya me yasa. Da farko, saboda abu ne mai arha, da kuma amfani da shi, masana'antun za su iya ba mu farashi mai araha. Abu na biyu, kayan gidaje ba sa ɗaukar nauyin kila mai ƙarfi, sabanin ƙofofin da ke buɗe kullun kuma a rufe su, da frabbo biyu, waɗanda suka zama masu kallo koyaushe. An kiyaye Amnogie a baya daga tasirin waje, tun da yake kusa da junan su.Bayanai game da kayan kitchen kayan kitchen zai zama ba tare da rashin fahimta ba idan ba haka ba ne don wani numance daya: a kan yadda aka yi su, kudin karshe na naúrar ya dogara. Akwai dabarun glued da makamashi. Bayanin farko na farkon suna da alaƙa da juna tare da taimakon manne a cikin yanayin masana'antu (a wurare na musamman, tare da cikakken ma'aunin kai tsaye, da sauransu.). Na biyu an kawo shi gida ga mai siye a cikin kwalaye mai lebur, kuma kuna buƙatar tattara su da kanka ta amfani da sukurori da sikirin. Tabbas, zaku iya ɗaukar ƙwararru (mafi kyau a cikin kamfanin guda ɗaya inda kuka sayi kayan daki) da sauri kuma tare da sanin yanayin, amma aiyukan ba ta da sauri kuma kimanin 10% na farashin kayan dafa abinci. Tabbas, kayan ado tare da hulls na glued yana da tsada sosai fiye da tare da ƙungiyoyin ƙasa, amma an yi imanin cewa na farko kuma ya fi na biyu. Wani lokacin mai kerawa daya ya samar da kitchens mai kama da kayan maye da kuma Alamar kasuwanci daban-daban, kamar ARAN- ARANAN da sabon tsari, "Dme" (Russia-Finland) - Murmushi da Marcello. Masana'antar Elt tana yin kayan ado kawai tare da huldun glued, enel kawai tare da ƙungiyoyi. Mafi yawan gidajen cikin gida da haɗin gwiwa suna haifar da dafa abinci na prefabricated. A cikin yaren kayan samari, ana kiransu "Whales", wato, an sayar da shi daga tsarin Turanci-kafa, naúrar, kit).
Courertops
Waɗannan suna rufe da lambunannin ƙasa da aka yi amfani da su azaman aikin. Countertops sun haɗa a cikin daidaitaccen tsarin matakin matakin kai na tsakiya an yi shi ne da kayan abinci iri ɗaya da kuma wannan fasahohi iri ɗaya kamar masu fafuri. Bambanci a daya: Anan faranti suna da sau biyu na kauri fiye da a gaban bangarori (yawanci 36-38mm). Idan baku gamsu da cub ɗin da aka saba ba, don odar mutum, yawancin masana'antu na iya yin misalin dutse ko wucin gadi, ƙarfe ko kuma saitin itace mai ƙarfi. A zahiri, farashin gaba naúrar zai ƙaru da yawa.
Masu kera da farashin
Tabbas, farashin kayan ɗorawa ya dogara ne kawai wanda aka sanya kayan. Bari mu ce, yanke shawarar siyan kayayyakin daya daga cikin manyan masana'antun duniya (alal misali, Balbobi, Falbọ, Nolte, Alno, Fielo, da Alno), ya kamata ka shirya don abin da ya kamata ka biya a fili ƙari don Haka alama, faranti da zane-zane da chiardboard, tsararren da veneer. Guda ne, a, ba wadancan ba. Babban aiki a cikin samuwar farashin kayan daki ana buga shi ta hanyar ƙira, ko kuma mafi sani da fasaha bayani. (Ruwa na kamfanin yana biyan kuɗi mai yawa, ko kuma ya jawo hankalin shahararrun masu zanen kaya. Kadan ne ga Ofile-size, da kamfanonin da ba a girmama mahimmancin su don ci gaban sabo samfuran.)
Hakanan mahimmanci ne da kuma asalin kayan da abubuwan haɗin, saboda har ma masana'antun cikin gida daban-daban suna halartar kasuwa daban. Wasu sayan facade a Italiya, masu amfani - Cheremanies da Austria, da kuma Chipboard na gine-ginen, koda an samu kuɗi na Jamusawa. Wasu kuma suna yin sauƙin sauƙaƙe, adana shi a farashi, kuma sau da yawa akan inganci. A zahiri, kayan abinci, a cikin samar da manyan samfuran da aka saka, a wasu lokuta sau da yawa sau da yawa sun sami tsada a cikin ginin mafi kusa. Da lokaci guda. Ra'ayin ya lalace cewa samfuran gida a fili yake mai rahusa shigo. Haka ne, ya kasance a gabanin, amma a cikin 'yan shekarun nan, tare da cigaba a cikin ingancin kayan daki, an rage farashin rupupture. Sabili da haka, yanzu zaku iya siyan kyakkyawan abinci na zamani na samar da Rashanci, amma an sami ceto a lokaci guda ba zai yiwu a yi nasara ba.
Yawancin kayayyakin abinci na abinci daga manyan masana'antun duniya da masana'antun cikin gida za'a iya samu a shafi na shafukan yanar gizo na Catreas. Anan za ku koya ba kawai farashin kayan ɗakin ba, har ma adireshin salon da aka sayar.
Kwanan nan, ƙimar yanayin Robone ana amfani da shi sau da yawa don tsara farashin kayan kitchen. Menene kuma menene yake faruwa? Mun yanke shawarar fayyace wannan batun kuma mun bayar ga manyan kamfanoni guda uku don kammala kayan daki tare da yankin na yau da kullun da kuma lissafa farashin na kai. An ba da waɗannan yanayi masu zuwa: kayan masarufi na MDF tare da ɗakunan ajiya (babban mai sheki (babban mai yawa), kusurwar.
An yiwa mahimmancin masana'antar daga Hanga daga Hanak tare da tsintsaye na taimako kuma an yi layi tare da Veneer
Hanak, Trend Model. Nasara hade na facades daga Mattte da MDF tare da mayuka daban-daban
Federirƙiri Masana'antu Delt (Russia), Model Federica
Amfanin wannan aikin ya hada da saiti na iri iri iri guda a gefen dama. Da yawa daga ƙofar isometric yana ba da gaskiyar lamuran kai. Kwanduna masu jan hankali waɗanda ke sanye da ƙananan kabad, sauƙaƙe duk abubuwan da aka adana anan. Kafafu kafafu a gindin kayan ado na rage tsabtatawa na sauƙaƙe
| P / P. | Sunan kashi | Girma, cm (Edorfububububub) | Farashin, $ |
|---|---|---|---|
| Ƙananan kabad | |||
| ɗaya | Guda guda tare da ƙofar juyawa | 457158. | 210. |
| 2. | Don ginshiyar tanda | 907158. | 114. |
| 3. | Angular | 1057158, DARAJA- 45 | 315. |
| 4, 6. | Tare da kwanduna biyu masu gudu (2pcs) | 907158. | 920. |
| biyar | Ya ja da baya a ƙarƙashin matattara, tare da kwanduna biyu | 907158. | 503. |
| Manyan kabad | |||
| 7. | Tare da ƙofa makafi | 601233333.5 | 379. |
| 8-12. | Glazed (5pcs) | 9041333.5 | 1060. |
| 13 | Don bushewa, tare da ƙofar hinada (yana buɗewa) | 9041333.5 | 299. |
| goma sha huɗu | Tebur TAFIYA | 240 + 27060, kauri 3.8 | 224,4. |
| goma sha biyar | Kafafu (8 hadaddun) | Height 12. | 47.6 |
| goma sha shida | Warshan | 40.8. | |
| Jimlar kudin kai | Tsawon kabilun - 510. | 4112.8. | |
| Matsakaicin farashin hanya | 806,4. |
Bayanin kula. Farashin masu hannu an haɗa shi a cikin farashin kayan daki. Farashi na wanka, mahautsini, huffs, hob da tanda farashin naúrar ba a haɗa su.
Kamfanin "Darina Factory, Model Progres Factor)
Ya kamata a amince da wannan aikin a matsayin nasara dangane da farashin farashin da ƙirar mutum abubuwa. Kiwon kai ya shiga cikin lambobin da aka shigo da su da yawa da kuma drawers guda huɗu, wanda ya dace don adana ƙananan abubuwa. A kan shelves na bangarorin kwalayen, zaku iya shirya vases, jita-jita ko kwalba don kayan yaji
| P / P. | Sunan kashi | Girma, cm (Edorfububububub) | Farashin, $ |
|---|---|---|---|
| Ƙananan kabad | |||
| ɗaya | Drawers huxu | 457260. | 264. |
| 2. | Don ginshiyar tanda | 607260. | 104. |
| 3. | Berve tare da ƙofofin juyawa | 907260. | 211. |
| huɗu | Kusurwa a karkashin matatun | 1057260, kora tsawon 45 | 167. |
| biyar | Bude Ciber | 307260. | 59. |
| Manyan kabad | |||
| 6. | Yi waƙoƙi | 457232. | 123. |
| 7. | Babive tare da ƙofofin glazed | 907232. | 249. |
| takwas | Angular | 60932. | 257. |
| tara | Don buyshka | 457232. | 113. |
| 10 | Cika majalissar (bushewa don jita-jita) | Tsawon45. | 59. |
| goma sha ɗaya | Bude Ciber | 307232. | 43. |
| 12 | Tebur TAFIYA | 255 + 13560, kauri3,8 | 198. |
| 13 | Cocol | Heigh10. | ashirin |
| goma sha huɗu | Warshan | 28. | |
| goma sha biyar | Iyawa (13pcs.) | 38. | |
| Jimlar kudin kai | Tsawon zaben- 390. | 1933. | |
| Matsakaicin farashin hanya | 495.6 |
Bayanin kula. Farashi na wanka, mahautsini, huffs, hob da tanda farashin naúrar ba a haɗa su.
Masana'antu "EuroComment" (Russia), samfurin "amber"
Wani fasalin mai ban sha'awa na wannan aikin akwai abin kallo da fitilu, hasken wanda ya faɗi kai tsaye akan aikin. Nuche sama da shiryayye mai glazed yana da gangan kuma a bayan hood: Babban kwamitin na majalisar ministocin ya karbi ci gaba a cikin wani sabon jirgin sama. Abubuwan da aka zagaye abubuwan da aka zagaye suna sa abin da aka gama.
| P / P. | Sunan kashi | Girma, cm (Edorfububububub) | Farashin, $ |
|---|---|---|---|
| Ƙananan kabad | |||
| ɗaya | Tare da drawers biyu | 1207260. | 398. |
| 2. | Don ginshiyar tanda, tare da aljihun tebur | 607260. | 124. |
| 3. | Tare da drawers uku (daya tare da kwandon shara) | 607260. | 279. |
| huɗu | Kusurwa a karkashin matatun | 1057260, kora tsawon 45 | 270. |
| biyar | Kusurwa zagaye rufe | 357260. | 327. |
| Manyan kabad | |||
| 6. | Babive tare da ƙofofin glazed | 1204833. | 199. |
| 7. | Sotskid ƙofar (yana buɗewa) | 60733. | 202. |
| takwas | Bhipe Blivenve | 60733. | 144. |
| tara | Don bushewa, tare da ƙofar hinada (yana buɗewa) | 60733. | 230. |
| 10 | An bude kusakar shiryayye | 207233. | 84. |
| Kayan aikin na zaɓi | |||
| goma sha ɗaya | Ta gani | 270 + 11060, kauri2,5 | 133.7 |
| 12 | Kwamitin gefen | 2433 (Altagubina) | 3. |
| 13 | Kashe-tashen hankulan da aka dawo da shi a kan wani majalisar glazed | 12024 (tsawon) | 2,4. |
| goma sha huɗu | Kashi na baya a cikin NICHE don Hood | 607. | 2,4. |
| goma sha biyar | Shiryayye (fart for fo | 6048, kauri1,6 | 4,2 |
| goma sha shida | Transform mai canji (2PC.) | 54. | |
| 17. | Chrome fitilu (6pcs.) | 48. | |
| Jimlar kudin kai | Tsawon zaben- 380. | 2504.7 | |
| Matsakaicin farashin hanya | 659,1 |
Bayanin kula. Farashin farashi, gefen mai ban sha'awa, tushe da hannu an haɗa su cikin farashin kayan daki. Farashi na wanka, mahautsini, huffs, hob da tanda farashin naúrar ba a haɗa su.
Masu gyara suna godiya da masana'antar elt, Edel, "mai salo dafa abinci", "kamfanin ial-Kucchin", "Kamfanin Medic" da kamfanin "Darina" don taimako a ciki shirya kayan.