A karkashin Kamysh

Maido da kayan daki ba shi da rikitarwa, kamar yadda alama da alama na farko. Ka yi la'akari da yadda za'a dawo da kujerar Wicker, mataki-mataki.

Ba a cinye kujerun Wicker, inda rana ɗaya aka halitta rami a cikinsu. Sannan an tsabtace kujera wani wuri a cikin dakin ajiya a jira na gyara ... kaɗan ne suka yi niyyar ɗaukar gyaran. Za mu yi kokarin taimaka muku aikata shi.

Kayan aikin da ake buƙata da kayan

Wannan kujera tare da kujerar da aka watsa wanda ya shigo cikin Discrepair yana da fam ɗin trapezodo. Gyara wanda zai iya aiwatar da shi a sauƙaƙe, ya fara da cire tsohuwar sa, kuma wannan kuna buƙatar rarraba shi. Idan kun sayi kujera ba tare da amarya ba, ta amfani da layin nadawa ko roadette, ƙayyade braked braid wane nisa yake amfani da shi.

A kujerun kujerar kujeru, sittile silsiles yawanci suna faruwa: a tsaye a tsaye maimakon na bakin ciki na bakin ciki, har da na bakin ciki na bakin ciki, da kuma diagonal biyu, kadan sewnal. Don la'akari da ceton, zaka iya amfani da kaurin guda amarya, alal misali, 2.5mm, kamar yadda a lamarinmu. Sannan kuna buƙatar nau'ikan amarya uku: 2,5mm fadin don suri, 3.5mm don inganta firam da 2mm don haɗin su. Jimlar - 100-120g reeds.

Za'a buƙaci allura biyu na tsawon 6mm biyu daga kayan aiki na musamman, Brass huɗu na tagulla 4,5mm tagwabta. Bugu da kari, zaku buƙaci tsohon cokali mai yatsa tare da haƙori, saboda nisa tsakanin su shine 5mm, soso, subse, karamin yanki na paraffin.

Aiki: Mataki-mataki

Fara da soaking a cikin ruwa 2-3 guda na reed fitsari da mintina 15. Tuntuɓi su a hankali kar su karya; Idan an narkar da su ko lalacewa, a yanka sababbi.

• Da farko, layi na farko na tsaye na tushen an daidaita shi (gaban baya). A kan ingantaccen tsabtace saman firam, yin fil hudu farkon budewa. A tushe, an gwada tef a jere ɗaya; Sannan kwafi. Layi na biyu yana tare da farkon a karkashin firam.
• A kwance screens ne suka yi watsi da perpendicular zuwa tsaye, kuma a sauƙaƙa: jere daga sama da lamba daga ƙasa. Fara wannan aikin tare da allura mai lebur, kuma lokacin da kashi biyu bisa uku na fadin ya cika, a matsayin tashin hankalinku, a matsayin tashin hankali na kafada ya sa ya zama da wuya a sanya allura.
• A lokacin da shimfiɗa braid diaagonally, duk abin saukowa ya kamata a yi da ruwa. Fara barin reeds tare da hannunka, daga hagu na gaba zuwa dama na baya, gaba daya a ƙarƙashin layuka biyu da sama da layi biyu. Don haka, yi amarya a kan wannan diagonal har zuwa ƙarshe. Don gama saƙa, a dage farawa a gaban kishiyar, a madadin sama da ƙasa, a cikin tsari da sabanin yadda aka bar zuwa dama.

  Bayan kammala rabin na biyu na wurin zama, karkatar da shi diagonally a daya shugabanci, ba mantawa da kai tsaye madadin kowane layi.

• Aƙarshe, a kusa da firam ɗin an daidaita shi da babbar braid, wanda aka daidaita tare da bakin ciki (2.5 mm), rufe lumes da ramuka.

Lokacin da Braid ya bushe, hare gefen ta gefen paraffin don amintar da weaving, tabbatar da cewa ba a juya braid ba.

	Bayan kun cire wurin zama daga kujera, yanke tsohon Wicker a kusa da kewaye tare da wuka mai takalmin. Daga gefen baya, tsaftace ramuka a cikin tsarin mai gani.
	A cikin ɓoye na baya, saka ɗaya brass Pin a cikin rami wanda yake a tsakiyar, ɗayan kuma a cikin rami na uku daga gefen hagu. Hakanan, saka fil biyu a gaban bunkasa.
	Tsallake braid braid ta cikin rami na uku na backara baya da isar da shi a jikin bishiyar. Daga nan a sake ɗaure madauki kuma ta toshe shi da tagulla fil.
	Ta wurin zama ta wurin zama ta wurin zama kuma saka shi a cikin rami da ya dace a gefe ɗaya, bayan abin da yake a cikin rami na gaba.
	Don haka, ja iska a layi daya a duk faɗin wurin zama. A gindin trapezium a cikin kowane kusurwa, yi amfani da sabon sashi na amarya don rufe sauran farfajiya.
	To, a cikin ramuka iri ɗaya, jeri na biyu na braids. Kowane sabon sabo ɗaure zuwa wanda ya gabata a bayan firam.
	Don haka aka samu jerin gwano na biyu. Ya kamata a tuna cewa allo suna buƙatar ɗaukar fil a kowane lokaci don mafi girman budewa.
	A bayan firam na wurin zama na kujera a ɗayan kusurwar baya (a cikin hakkinmu - a cikin rami mai shimfiɗa a kwance a kwance, bayan wanda ya sake wani amarya braid kuma ya sa madauki sama da wanda ya gabata.
	A gaban gaban, muna ja da allura allura a sama a saman da kasan da a tsaye na kuka. Matsa gaba don kunna Scam a kwance tare da allura ta biyu.
	Da farko, kwanciya guda a kwance a kwance amarya, sannan a shirya su, tare da kowane yana canza shugabanci. Bayan haka, kun kunna kwance a kwance, sannan ganyen tsaye.
	Screens na ƙarshe na ƙarshe zuwa gaban rami na hannu na dama, da kuma bayar da ara zuwa ga ƙarshen sabon sashi, wanda diagonal na farko zai shafe shi.
	A da pinned tare da PIN a cikin rami mai rami, tsallake DIAGONally, kamar yadda a cikin kararrakin da suka gabata, madadin karar, da ƙasa kuma jerin a tsaye da a tsaye.
	Bayan daidaito daidai, rigar braid a ko'ina. Roune mai diagonal a rabin kujerar, tsallake allo sannan a ƙasa, sannan a saman.
	Diagonal ya saka cikin bulala guda. Duk lokacin da ka yi wani ofishi a gefe, sa'an nan kuma shimfiɗa shi ba tare da bayar da juyawa ba.
	Bayan kun gama saƙa da diagonal akan rabin kujerar, ci gaba da aiki a gefe guda, sanya amarya a gaban shugabanci.
	Don yin edging, tsallake murkushe bakin ciki a cikin rami. Lokacin da kuka saƙa, zaren a sake a wannan rami kuma saka wani sashi mai zurfi a cikin kumburi, wanda hakan zai gyara shi a cikin kowane rami.