Bango don falo

Sanya babban bangon kayan kwalliya na sassan biyar - ba sauki, amma babu abin da zai yiwu a ciki.

Bangon na bangarori biyar da aka yi daga daskararren itace itace zaiyi yin ado da ciki na kowane falo. An samar da tushe don kayan buɗe guda biyu da uku. Idan dakin ya bada izinin, zaka iya tattara tushe da mezzanine. Don taronta da ƙarshe za a buƙaci kusan mako guda.

Kafin aiki

Yanke shawara, daga abin da kayan za ku tattara bango. Don masana'anta da kuke buƙatar allon PPAGE na masu girma dabam dabam. Idan kana da duk kayan aikin da suka wajaba da kayan aiki, zaka iya amfani da katako mara magani. Koyaya, lura cewa pre-sarrafa shi, fugoting da sawing zai lura da kara lokacin shigarwa.

Efayyade jerin sassan da hawa, sannan ka sanya allon.

Tukwici Masters

Idan ka yanke shawarar amfani da bututun lebur don Majalisar, sannan ka sanya wurare don tsagi, gyara allon da clamps. Grooves hau tare da injin milling na duniya.

Girman bango (aya 250, tsawo na 223.4 kuma zurfin 48cm) za'a iya canzawa gwargwado, gwargwadon yankin dakin.

Ganin cewa tushe yana da girma da wahala, yana da kyau a sanya shi mai hana shi CIGABA. Muna ba da shawarar amfani da mayafi na katako (toshe-cikin spikes) ba tare da manne don shigarwa ba (6-8 ga kowane ɓangaren ɓangare) ko kuma yanayi da sukurori guda ɗaya).

The tushe ya ƙunshi sanduna shida (gefe biyu s da na huɗu na huɗu), waɗanda aka haɗa a ƙarƙashin ƙasa na tushe akan layi ɗaya tare da ɗayan haɗin guda uku da aka haɗa ta hanyar da aka haɗa da wata. Ya kamata a lura cewa dole ne a zurfafa ginin da karfe 3 cm dangane da farjin jirgin sama.

Farkon wuri da kunci duk cikakkun bayanai, sannan a sarrafa su a kan madauwari gani. A rashi, yana yiwuwa a yi amfani da wutar lantarki da aka gani tare da jagora a cikin hanyar sandar sandar.

Aikin ya fara da taron majalisar dokoki na tushe na A da B da bangare na gaba na layin tsakiya, tsaka-tsaki da kofofi da kofofin.

Babban taro (duba tebur) dangane da girman sassan da aka yi amfani da shi, ya zama dole don ƙirƙirar allon tsakiyar don ƙirƙirar filin tsakiyar a tsaye. Irin waɗannan mahadi ana yin su ne kan spikes daban-daban siffofi (ta amfani da dricks da masu suttura) ko akan sanduna.

Ana saka shelves a gefen groove na 22 samari da zurfin 5mm, wanda bai kamata ya kai kimanin 25mm zuwa ƙarshen ƙarshen racks (to ba za su zama bayyane ba). Wajibi ne cewa shelves suna da abubuwan da suka dace.

Karshe gama bango shine yanayin dandano da fantasy. Amma dole ne a fara ba a baya ba fiye da ku kammala shigarwa. Idan ana so, ana iya fentin bango. Muna amfani da yadudduka biyu na kayan kwalliya, polishing farfajiya bayan bushewa kowane yanki, sannan ya ninka bango mai launi mara launi.

Jerin taro

Teburin da aka tsara a koyaushe a jera duk mahimman sassan da ke nuna girman. Kauri daga abubuwan katako shine 22 mm, plywood - 5 mm.

	Suna	Yawan, PCS.	Girma, mm.	Abu
Amma	Ƙananan shiryayye	ɗaya	2500480.	Mai canzawa
Cikin	Tasirin Base	ɗaya	2500480.	Allon
Daga	Bangare na tsaka-tsaki bangare	huɗu	460480.
D.	Gefen rack	2.	460200.
E.	Tsakiya na tsakiya	2.	1658360.
F.	Tsakar lokaci	2.	1658360.
G.	Gefen tsayawa	2.	1658200.
N.	Tsararren Shelf	huɗu	610355.
I.	Shirtallah	takwas	410355.
J.	Shirye-glf	takwas	210195.
Zuwa	Top Panel	ɗaya	1932360.
L.	Ƙofar tsakiya	ɗaya	610470.
M.	Ƙofar gefen	2.	410470.
N.	Gaban gaban murfin ƙasa	ɗaya	146550.
O.	Siffar Siffar Kayan kwalliya	2.	53550.
P.	Bangon Baya	ɗaya	610470.	Plywood
Q.	Bangon baya bango	2.	410470.
R.	Mashaya na tsakiyar sashin	huɗu	43050.	Mahani
S.	Gefen gefen gefe	2.	18550.

	Ta hanyar yin sarrafawa, canja tsagi da tsintsaye (ya kamata su zama kaɗan fiye da knens - zai sauƙaƙe shigarwa) a ƙarshen racksics.
	Sa mai tsagi da swings tare da manne, da kuma knonan da kyau su zuba manne manne, sannan kuma shafa shi tare da buroshi. Cikakkun bayanai suna danna junan su a hankali don guje wa lalacewar maɓallin.
	Bayan duk bangarorin sun taru, manne ne ya yi magana da manne da ƙasa, misali, yin amfani da tsawa tare da diski diski n80, sannan n120.
	Aiwatar da alamar a kan kwamitin kuma yanke sassan ta amfani da wani madauwari gani.
	Daga yadda ake yi daidai daidai da tsagi za a yanke, a kwance daga cikin man da aka shigar ya dogara da yawa. Layin layin zai lura da wurin su nan da nan akan rakwai biyu, kusa da juna gaban gefuna.
	Sanya tsagi ta amfani da na'ura ta musamman tare da jagora da aka gyara ta hanyar clams biyu da ba a sha ba. Idan baku da abun yanka tare da diamita na 22mm, zaku iya amfani da abun yanka tare da diamita na 12 mm, amma sai ka yi sassa biyu a kowane gefe.
	Zabi wani babban tarihin-kai ga wurin juyawa da aka kirkira lokacin da aka yanke shi, ba ya kai 25mm zuwa gefen allon.
	Ramin ramuka biyu a cikin tsagi tare da diamita na 3mm don ɗaukar shelves. To da hannu ko rawar soja yin chamfer don sukurori.
	A gaban shelves tare da saw ko electururuck, yi grooves 5 nisa da 28mm.
	Yanke a kasan gindin famfo tare da zurfin 6mm, yana juyawa daga gefen 8mm, ta amfani da mai yanke mai na 6mm tare da jagorar hagu.
	Bayan an yi groovees, bincika daidai da haɗin haɗin ƙasa.
	Don haɗa shelves, ɗauki axis a kan abin da yaƙe-yaƙe na katako zai kasance.
	Sa'an nan kuma a gefuna na racks da bangare, aje wuri sarari don ramuka da rawar da su.
	Kamar yadda yake a cikin yanayin tsagiushe, ramuka na kurma dole ne ya zama mai zurfi fiye da tsawon ƙura. Hagu na hagu ya ragu zai sauƙaƙe Majalisar.
	Ka lura da abubuwan da aka yanka daga cikin shelves na tushe, ingantaccen amfani da salup a kan sassan. Idan babu jagora na musamman, shigar da madauwari ya ga matuƙar dogo madaidaiciya, tabbatar da clamps.
	Gina sansanin da ya fara daga kasan shiryayye wanda kuka haɗa da rakunan gefen da bangare. Idan ka yanke shawarar shigar da tushe, to, a karkashin ƙasa shiryayye, sa sanduna. Murfin ado na tushe don amintaccen ƙarshe.
	Shigar da saman shiryayye na tushe tare da mataimaki. Kuna iya dacewa da shi tare da cyamu, ta amfani da tsayawar.
	Tattara tsakiyar sashin bango, ya goge ɗayan bijiyoyin biyu zuwa riƙƙi. Dole ne a tabbatar da tabbatar da amincin da amincin taron.
	A wannan ka'idar guda ɗaya, haɗa wasu cikakkun bayanai a ɓangarorin ɓangarorin ta amfani da tsagi don sanya rakunan.
	Shigar da sassan yanki. Tunda an gyara ƙananan shelves tare da dunƙule kawai a gefe ɗaya (daga ciki), to, kuna buƙatar dunƙule tushen rack. Zai fi kyau aiwatar da wannan aikin tare da abokin tarayya.
	Babban racks na farko yana ba da tsayayyen ƙirar duka. Ta kasance propylene ta kasance propylene don kara dacewa. A ɗan lokaci amintaccen shi don layout yanke, to kula da gani, sannan saita zuwa wurin da ya gabata.

Shigar da ƙofar

	Ka lura da wurin hinaduwa na hinada a ƙofar 8mm daga sama da ƙasa da 2,5 cm. Kula da wace hanya za su buɗe.
	Idan babu mai yanke mai yankan, yi amfani da rawar soja tare da iyakancewa don kada ya sanya ramin.
	Bayan yankan mai yanka, cire sawdust da kwakwalwan kwamfuta, sannan tsaftace rami ya fifita.
	Ya rage kawai don gyara madaukai da ke kan ƙofofin da ganuwar da suka dace, sannan tare da taimakon daidaita sukurori, a gyara kofofin uku a cikin jirgin.