Bar

Tsarin katako a cikin nau'i na karamin buffet tare da teburin madubi. An rufe gefen waje tare da slays na ado.

Ta hanyar ƙira, mashaya mai sauqi ce. Kadan buffet ne tare da sashin rufewa ɗaya da kuma shinge na matsakaici.

Ana gina madubi a cikin aikin motsa jiki, kuma daga waje, an rufe tsayuwar tsayin daka da kayan kwalliya (don rack ɗinmu ya ɗauki 2112mm a tsayi).

1. ƙofar;
2. madubi;
3. madauki;
4. sarkar;
5. Magnetic Latch;
6. Countertop;
7. Kasar Kasa ta Kasa;
8. Countertop;
9. sake rufewa;
10. madubi;
11. Top Panel;
12. Gidan Zama;
13. haɗa plank;
14. gefen gefen saman kwamitin;
15. mashaya;
16. dunƙule;
17. haɗa plank;
18. Kayan ado na ado;
19. kusurwa na ado;
20. Ado sheat rack 10mm lokacin farin ciki;
21. Platt.
22. tushe;
23. shiryadan shiryayye;
24. mashaya.

View by kibiya a

25. gefen gefen saman kwamitin;
26. Ruga (pals).

Rufe jakato

Don hawa madubi, ya fi kyau amfani da manne ne a kan asalinsu. Koyaya, sassan glued suna da matukar wahala a daidaita, kamar yadda manne da sauri ya gamawa. Sanya madubi da kuke buƙata a gaba ƙung ɗin. Don yin wannan, saka shi a wani kusurwa zuwa saman countertop, m kuma danna hannu a hannu a cikin jirgin.

Don aiki, zaku buƙaci kayan aiki: electrolovka, nika nika, rawar soja, ploner da transvere gani.

Kayan da ake buƙata

Suna	Yawan	Tsawon, mm.	Nisa, mm.
Pine Sarki Swees 22mm
Tebur TAFIYA	ɗaya	1050.	300.
Tushe	ɗaya	1050.	300.
Top Panel	ɗaya	950.	300.
Shirtallah	ɗaya	930.	280.
Wani bangare na rufewa na rufewa	ɗaya	650.	150.
Gefen bangon bangon	2.	178.	150.
Pine lokacin Lokaci 5030mm
Tsaye	2.	912.
Gefen struts	huɗu	220.
Dogayen abubuwa	2.	910.

Kazalika 3m fitarwa mai saukar ungulu, 1050300mm Mirror, 1,5m Plinth, 2m Corner Racker, 20m lebur 320mm.

Farkon aiki

Daga cikin allon biyu tare da girma na 2000300mm, sha sassa hudu: tushe, worktop, babba panel da matsakaici panel da tsaka kadada da kuma keɓaɓɓen shiryayye. Zai fi kyau yin wannan aikin tare da saw na madauwari ko electrolovka (amfani da girma a cikin tebur).

Yi ganuwa uku na sashe na rufewa daga jirgin tare da girma na 2000150mm. Daga nan daga mashaya tare da giciye sashe na 5030 mm, yi rakoki biyu da sararin sama (trackers hudu da tsawan biyu).

Taro

Akan kuma juya baya na Babban Panel, shigar da sandunan (sararin samaniya) wanda a haɗe da kayan ado zasu haɗe. Pre-Aiwatar da narkup tare da fensir ta amfani da mai mulkin ƙarfe da murabba'i.

Slit da kuma amintattu 440mm sukurori guda uku na sashe na rufewa, sarrafa cewa akwai kusurwoyi madaidaiciya a cikin gidajen abinci. Bayan manne ya bushe, shigar da aikin motsa jiki da kuma saman panel, ma da amfani da manne da sukurori. A lokaci guda, sashin rufewa ya kamata a located sosai a tsakiyar tebur saman.

Fara da ramuka ramuka don shigar da hanyoyin shirya. Sanya samfurin zuwa ga kwamfutar hannu da kuma tabbatar da hanyoyin da ke kan sandunan saman kantuna (a kan tarnaƙi da goma sha uku a gaban). Kar a manta a datse da zaben zaɓaɓɓun katako na planks, musamman a cikin haɗin gwiwar. Sa'an nan saita tushe tare da sanduna (struts) kuma haɗa hanyoyin dodanni na layin fata na kayan kwalliyar fata.

Don ba da girman tsarin tare da sukurori da manne, rakumi biyu tare da gefuna mashaya da shiryayye. Sa ƙofar. Don yin wannan, mika katunan biyu kuma haɗa su da sukurori zuwa saman panel. Ana aiwatar da ƙofar tare da sarkar, kuma a cikin wani lattles biyu na magnetic biyu. Saita rike bayan zanen samfurin.

Gama

Tare da taimakon manne da kusoshi, haɗa da sandar haɗi zuwa faranti da gefuna na saman tebur. Bayan haka, ta amfani da filayen da sandpaper, dan kadan kewaye da hakarkarinsa. Haka kuma, shigar da plinth. Shake a kan sasanninta kusa da kusurwar kusurwa, wanda kuma zai ɓoye sikirin da sukurori.

Zaɓi samfurin kuma cire sawdust, sannan a shafa Layer na na musamman na na musamman don itace zuwa saman saman. A bu mai kyau a yi shi nan da nan kafin zanen racking wanda aka yi amfani da shi wanda baƙar fata ake amfani da shi. Ganuwar ciki na sandar murfin launin fatar launi mara launi (zai sauƙaƙa shi).

	Tattara daga cikin rufewa na rack, tabbatar cewa duk haƙarƙarin allon (gami da gefen madaidaiciya) sa a cikin jirgin.
	Haɗa kayan ado na ado zuwa sandunan kantin sayar da tushe, kuma kawai a ba da shawarar.
	Firayim na farko na tsarin bayar da racks na gefe, da wasan karshe - samar da tushe.
	Plattint da haɗa katako yana rufe dunƙulen sukurori. Musamman ma yin gidajen abinci na slats a sasanninta.
	Shigar da madaukai, magnetic latches da sarkar da ke riƙe ƙofar a cikin matsayi a kwance.
	Tare da madaidaicin taron sashe na rufewa, da magnetic lattes mai sauƙi zai riƙe ƙofar da ke rufe a cikin rufaffiyar matsayi.
	Tsoffin yana shirye don zanen ƙarshe da shigarwa na madubi, riga an yanke gwargwadon girman teburin saman.
	Muna ba da shawara a saman rackarfin ciki don amfani da varnish mara launi, wanda zai kare shi daga ruwa da gangan ya zubar da ruwa.