We understand which means and techniques to use to clean the wooden and stone surfaces.
1 For Wooden Surfaces - Brush with hard pile
The best way to clean the wooden terrace is to use brushes with a long rigid pile to remove the main mud. For cleaning what remains between the boards, you can take brushes with a soft pile. Led brushed in the direction of wood fibers.
For serious contaminants that are not manual cleaning, a high pressure apparatus can be used - it will wash the dirt with a strong water pressure. But this method is quite aggressive, the top layer of wood may be damaged. The high-pressure apparatus cannot be used often, and after such cleaning it is necessary to process the terrace with varnish.
2 For DPK surfaces - Brush and dishwashing agents
A mixture of plastic and wood fibers is also cleaned as the usual tree, with a brush. You can add water and dishwashing agents. And if there are areas with fat stains, use degreasing detergents. After cleaning, it is important to wash off with water.
Cleaning agents based on phosphoric acid will help from spots of rust or highly emerged dirt. If it does not help, you can carefully use sandpaper. Do not scare a small difference in the color of the surface - under the influence of precipitation and sun rays it will smooth.
3 for sandstone - soap and brush
The first pouring step is to carefully rush all the vegetation, which made his way between the plates. After that, the surface must be suitable and ripped up with a rigid vice brush. Dirt can be cleaned using soap.
Use the device with high water pressure, as well as all acidic and alkaline detergents you can not - sandstone is soft enough, and such techniques will accelerate its destruction, it will be polluted even faster.
4 for limestone surfaces - also brush and soap
Limestone is another fragile stone. Therefore, it can be cleaned only with a brush and soap solution. If stains appeared that are not brushed, try to impose a layer of damp food soda on them. Leave a day and erase. If it did not help, you will have to invite a specialist with a grinding machine for stones.
5 For the surfaces of granite - cleaning the ferry and ammonia alcohol
Granite is sufficiently solid, so besides brushes, you can use the device for cleaning a ferry or water jet. Applying products based on acids and other chemically active substances can not be changed, as they can change the color of the stone. And to make the terrace or track more brilliant, use the solution of ammonia alcohol.
6 for concrete - sand
You can use a high-pressure cleaning machine, but water pressure will make concrete more porous. As a result, cleaning will have to be cleaned more often. Instead, try scattering fine sand onto the terrace or track and fastening the surface. Sand will help effectively remove pollution and does not hurt concrete.
7 for ceramic tiles and porcelain stoneware - ferry cleaning
If your terrace or tracks are covered with ceramic tiles, boldly use cleaning with water or steam pressure. You can also apply cleaning products for tiles and brushes with a pile of medium hardness.
