Vinegar, citric acid, needle and a few more Lifehas that will help clean the plumbing.
Often cleaning plumbing in the bathroom comes down to wiping the outer surface of the cranes and soul. While the watering can continue to be covered with rust and rust. Such cleaning in the future can fail. To prevent this, use our advice and do not forget to clean the plumbing regularly.
1 Find out the cause of the blockage
If you are going to clean the watering can because the water pressure has become less, - do not rush. To begin with, try to understand why he worsened. The reason may not be contaminated, but in the malfunction of the entire system. Remove the watering can and look how much water comes from the hose. If the pressure is sufficient, then proceed to cleaning - it should help.
2 Clean regularly
Even if you have crystal clear water from the crane, a flight will be formed on the litter, and in the nozzles - to appear blockage. Therefore, clean the souls need regularly. Take the rule to put it in order once every six months, as a last resort, once in 8 months, but not less often.
3 Prepare tools
Despite the fact that the cleaning of the watering can be ordinary cleaning, it will be necessary to remove part of the elements for better cleaning. You will need at least a gas key and screwdriver. Disconnect all possible details, it is necessary to thoroughly clean the device.
4 Take a remedy for
The easiest way to clean the watering can - take a remedy for the plaque that you use for the bath and other plumbing. Divide it with water with water in any container and lower the shower there. Leave it for 30-60 minutes, and then thoroughly clean the nozzles with a brush.
5 Use vinegar to clean
If you have unsubstantiated shower - a simple lifehak will come to the rescue. Place a watering can, without disconnecting from the hose, in a regular polyethylene package. It must be pre-filled with water with vinegar. Then leave in the package of watering can be in a short time (about half an hour), after which it is brushed in it, wash off the remnants and wipe with a soft cloth from the microfiber.
6 Apply Coca-Cola instead of a cleaning agent
Coca-Cola reads a good sort of falling on the plumbing. This is associated with bubbles, which, when entering the surface, remove particles of dirt. If you have ended the cleaning agent, but there is a bottle of soda, heat it and soak in it per hour.
7 Use citric acid for cleaning
Another good way to eco-friendly clean the soul watering is lemonic acid. If you have run out of home cleaning products, get a sachet with an acid and dissolve it in water. The resulting solution pour into the pelvis or other container and place the watering can in it. You can also prepare a special abrasive paste: crushing citric acid and add some water. She should grasp the plumbing and leave for a while, then wash off.
8 Arm yourself with needle
The surface of the watering can be cleaned with a variety of brushes, including tooth, and how to deal with fine holes in nozzles? Dirt from them is easy to clean the usual needle. Choose such that is as close as possible in size to the opening. Too thick needle will not pass, and thin will not clean the watering can from pollution to the end.
9 Do not forget to prevent
Despite the fact that cleaning is carried out at least twice a year, it is important to remember the preventive measures. It is impossible to make the formation of plaque on plumbing, as the raid is able to erod the surface and ultimately can lead to a breakdown of plumbing. In addition, he looks unaestly and spoils the interior. Follow the degree of water rigidity and, if necessary, put the filters.
