The most important thing about the size of the apron in the kitchen and placing sockets on it.
What is a kitchen apron
The strip of protective material above the working area is named by analogy with apron closing the clothes of a neat mistress. It prevents pollution of walls by difficult fat spots, soot, etc. The altitude of the apron in the kitchen can be different, but materials for its manufacture are used only hygienic and easily washable. In the recent past it was almost exclusively ceramic tile, today the range has expanded significantly:
- Mosaic from ceramics, glass, metal or smalts. Effective and very beautiful.
- Artificial or natural stone. Plates are used with a thickness of about 20 mm.
- Loose leather. Composite material of two layers. For the top there is a stone, for the bottom - ceramics.
- MDF. Inexpensive and practical option. It can be installed without prior alignment of the wall in the working area area.
- Metal, more often stainless steel. Matte models are easier to care, mirrored more effectively.
- Strained glass. Under this design, you can put photo prints, mount the backlight, etc.
- Plastic. Practically and budget. Not the highest quality models can be deformed from high temperatures.
All these materials are well protected by the walls of the working area from pollution and serve for a long time.
Standard Altitude Apron: Possible Variations
To enjoy kitchen furniture, it was convenient, even at the stage of its choice or design, if it is supposed to be customized, you need to decide on the height of the protective coating. It is calculated as the distance between the upper and lower cabinets headset. Despite the fact that there are certain dimensions, they may vary depending on the three main factors.
1. Dimensions of the floor block
The height of the Tumbness headset can fluctuate in the range of 0.85-0.9 m. Under the order can make outdoor furniture even higher or lower. It all depends on the growth of those who will use the headcard. Ideally, the countertop must be at the level just below the belt, it is considered as convenient for work in the kitchen.
Standard values are selected for medium height, so for high people the furniture is selected from 0.9 m and above, for low - 0.85 and lower. Built-in household appliances may differ in size. Then you have to go to the overall level. For small models, everything is simple - they are put on the stand, which is mounted as a roll-out box. Under the high one has to "raise" the rest of the furniture.
Working area with apron
2. Location of mounted lockers
It is customary to fix the kitchen cabinets so that their lower edge is located at a height from 1.35 to 1.5 m from the floor level. If necessary, other options are also possible. Determining with the placement of hinged cabinets, it is necessary to proceed from the convenience of using them. So, a person standing near the working area must be calmly reaching at least to the lower shelf of the cabinet.
It turns out that the height of the kitchen apron from the countertop to the bottom of the cabinet will be from 0.45 to 0.6 m. If furniture is supposed to be furnished with the door-up, you can choose the minimum distance. If the doors are attenuating, it is worth raising the wardrobe a little higher, otherwise they may not be very convenient to use.
Kitchen apron white
3. Presence of an exhaust
Protection in the area of the stove is required. Its height in this area in the presence of an exhaust will be maximum. Distinguish between embedded and independent hoods. The first are inside the furniture, the second can be dome, fireplace, etc. In any case, they rise above the stove higher than the bottom edge of the cabinets. Over the gas cooking surface, the hood is fastened at a minimum height of 0.75 m, over electrical - 0.65 m.
Width Apron in the kitchen: Is there a standard?
If the coating height can vary significantly (in some cases it reaches the ceiling), the width is usually limited to the size of the headset. The optimal width of the apron in the kitchen, the standard is not used here, is equal to the width of the working area. From what material is neither a protective coating is made, it should not go beyond the headset. In some cases, the tile "flies" from the apron on the wall, but it is rather an exception.
Another important point affecting the width of protection is its thickness. For thin materials, 3-4 cm is added to the distance between the mounted cabinet and the table, which will be found for furniture. So it will be possible to prevent the appearance of slots between the elements. If the apron is obtained by a massive, significant thickness, the allowances are not made. In this case, special plinths are used, which are tightly adjacent to the lower and top of the headset.
Width of the kitchen apron
How to choose a picture apron for kitchen
Pick up the apron for the kitchen, the dimensions of which will be optimal for a particular room, quite simple. It is necessary to take into account the wishes of future owners and choose the sizes stacked by the permissible standards:
- The width is equal to the size of the furniture headset;
- The minimum height is 50 cm, over a cooking surface from 65 cm;
- Minimum reserve from all sides of 3-4 cm.
Important moment. If it is planned to manufacture a coating from the tile, the standard cladding size is taken into account. This will significantly facilitate its installation. Plates from MDF and plastic are also released in standard sizes, so it will be easy to choose the appropriate option.
Rosettes on the apron of kitchen: height and placement methods
The number of household appliances in the kitchen is large. For their power, it is necessary to position the sockets correctly. Their number must correspond to the number of devices, and it is better to exceed it to create the necessary supply for future equipment.
There are several types of outlets that differ in the installation method.
- Overhead elements. Maximum easy to install, superimposed on the basis and fixed.
- Hidden sockets. Insert the cavity prepared in the wall. They are most often installed in the repairs.
- "Moving outlets." Made in the form of a modular block equipped with moving sockets that can be installed where it is necessary.
- Retractable designs. They represent a block of several elements that "hides" in the locker or in the worktop. It features maximum ease of use.
Sockets on Kitchen Apron
Any of the above elements can be installed on the kitchen apron. This necessarily complies with security requirements.
- The socket cannot be mounted higher than 2 m from the floor.
- The minimum distance from the product to the countertop is 15 cm so that the splashes and water drops will not fall into it.
- It is prohibited to have a rosette over the stove or sink.
Choosing a place to install, you should try to completely secure electrical elements from water from entering water. For example, if pipes pass on them, it is worth taking care of special lids and seals that protect terminals with a possible breakthrough.
Deciding what should be the height of the apron in the kitchen will be the owner himself. Despite the presence of certain standards, it is possible to choose a convenient option. The dimensions of the working area that the coating protects is selected taking into account the growth of the hostess, the location of the kitchen appliances and furniture dimensions. The coating material is also important. For glass or mosaic panels, you can choose any height. In the case of tiles it is worth considering its size.
