Feeders, vases, flowers and other crafts that can be made of plastic and glass bottles - we collected interesting ideas that are easy to implement!
Photo: Instagram dina_winter
Bottle feeder with her own hands
It is hardly the simplest thing that can be made from a blank container. Five-grade capacity is best fit: they are spacious, have a wide bottom, that is, several birds can be "dinner". But small babags are also not worth sending to the scrap: you can make several bird feeders and hang next to each other.
Photo: Instagram Tiflani_Vladivostok
Photo: Instagram ElenaPodueva
All you need is a scissors or a knife, a twine or a wire for hanging (you can save and "native" plastic cover with a handle), accessories and paint for decorating.
Procedure
We put the bottle on the side, place the marker of the place where the "windows" of the feeders will be "windows" and cut the holes of any size on the sides. Their number also does not matter - the whole design is at your discretion.
Plastic can be cut off only in three sides, and from the fourth to bend it up, making a visor to protect against rain.
Nelyalyko be sure to cover the lid so that the feeder does not pour water during the weather. If you need, wrapped with it with wire or rope, for which you can then hang the feeder on the tree. You can also attach a porchie from thin wooden sticks.
Getting to the most interesting thing - to decoration. There are no restrictions. Someone can only apply patterns, gluing multi-colored gift bowls, and someone creates the most real masterpieces from eco-materials: cones, jute (burlap threads), fir branches, sisal, straws, textiles, wood cuts.
Photo: Instagram elsy_kids
Photo: Instagram moskva_4_glaza
Photo: Instagram Fedorovtsevaa
Photo: Instagram Miavendetta
Photo: Instagram Olya_PetroVa1984
Photo: Instagram Mishkina_Katte
Vase from a bottle with your own hands
Glass bottle vase
Here, too, everything is simple. In most cases, glass bottles are used, as they themselves look stylishly, and some have an unusual form. Minimalism lovers leave them, as it is, in kind, sometimes adding only a couple of ribbons or jute strapping.
Photo: Instagram Irinazhukova9078
Photo: Instagram Anastaskovaleva
Photo: Instagram Anastaskovaleva
But if such an option seems too modest to you, you can wind up the entire bottle with other threads, putting them on glue, and decorate the composition of coffee with coffee, buttons, colored ribbons, beads.
Photo: Instagram Oksi__T__
Interesting look painted bottles. You can apply paint as a "naked" glass, and on top of the glued thread. And of course, where else, as not here, you can try your hand in decoupage.
Photo: Instagram Rykamimade
Photo: Instagram Cheshir_Spb
Photo: Instagram Cheshir_Spb
Photo: Instagram Cheshir_Spb
Plastic Bottle Vase
Plastic bottles look far away as aesthetically, like glass, and they will have to tinker with them so that the vase is beautiful.
Stages of work:
- Cut the top of the bottle.
- Print any favorite pattern pattern.
- Cut out the milestone and get it a marker on the bottle. We paint along the contour.
- Adhesive pistol fix beads or beads.
- The top edge can be cut with a candle so that it does not look torn, and also paint.
Photo: sdelay.tv, BELLA Blog
Another option, but without an additional decor. Sut off the top of the container. Scissors cut the vertical strips with a width of about 1 cm, not reaching 10 cm to the bottom, and weave the openwork edge.
Photo: sdelay.tv, BELLA Blog
Bottles flowers do it yourself
Sut off the bottoms, but do not throw them away! From the bottoms, then you can make a light curtain.
Photo: Sdelay.tv, Blog Anton
Draw on a bottle of petals of any size, cut them out. Next, we can bend the petals back and paint them if the flower like lily, chamomile or bell.
Photo: Instagram Alenausagina
Photo: Instagram Nosikova_evgenia
To create more complex in the form of petals, for example, carnations, we can use candles, because the material melts well.
To make a terry flower, it will be needed wire (it will be a leg), a strip of plastic and blanks of petals. Stripes heated above the candle and turn it with it. Then we put on already melted cups and petals. The locations of the details are heated for good clutch between themselves. In the center of the flower, bend the protruding end of the wire and fix the design.
Photo: Instagram Tretyakovlife.ru
From a whole bottle, you can make a cactus: for this you need to hold it a little over fire. And if you want to make it easier for your site, a dandelion bush, the Bucklage must be cut almost all for long narrow strips, a little without reaching the neck.
Photo: Instagram Curious.botanist
Photo: Instagram Elena740em
Birds from bottles do it yourself
Let us turn to more time-consuming work. The process will be long, because birds consist of a variety of details. Yes, and material for large individuals will need a lot.
Photo: Instagram Na_Dachy
Photo: Instagram Na_Dachy
Photo: Instagram Na_Dachy
Photo: Instagram _Kotyamba_
Photo: Instagram JuliyRudenko
Photo: Instagram JuliyRudenko
Pernava can be made approximately by one scheme.
You will need:
- bottles
- Styrofoam,
- adhesive gun
- cardboard,
- scissors,
- metal grid,
- Six for petition (can be without it).
Sequencing
From the cardboard, put the feathers of different sizes, make notches along the edges to give a natural look and sort the billets over sachets. If peacock was conceived, use 10 liters and more for its tail.
Photo: Instagram Ruslanshukhrov
Make a poultry layout from the foam and put it on the Nature. All parts of the torso cut out individually and secure them with glue.
Cut the body with a thin metal mesh so that its edges stand freely or lay on both sides - this is a frame for wings.
Feathers need to be glued with rows of braziness, starting with breast and turning onto the back. Cutter for tail can also be cut from the grid. Paws can be made of small bottles, cutting them into four strips (one will "watch" back).
For the eye, large beads or buttons are suitable.
You can paint at the final stage of work. Use enamel to burn out and other aggressive environmental conditions.
Photo: Instagram Yanikadrapak
Palm from bottles with her own hands
The number of bottles depends on the size of the tree: on the average of the height "plant" will need at least 50 pieces. You can immediately take bottles of green and brown colors, and you can use any and paint them later.
Photo: Instagram ludmilas_rus
Photo: Instagram Marina.monya
Palm facilities a lot. That's just one of them is quite simple.
For the trunk it will take a metal tube, the diameter of which allows you to turn it into the neck of the bottle. The tube is driven into the ground about half the meter, or even more.
The bottles "remove" the bottom, the housing is cut to the location of the narrowing of several bands, the bottles are planted on the tube, and then each other until it stops. Strips are somewhat diverted in different directions and recreate the texture of the palm tree.
To create leaves, all green bottles are cut across two parts, and then each detail - on narrow strips (without reaching the edge of 5-7 cm) in a step of 1.5 cm. Ideally, you need these crown fragments to be different sizes, Because they will need to wear on the frame and insert each other: first small, then large.
We ride on the wire "leaves" and form a branch. Fix five to seven such branches on top of the trunk.
Photo: Instagram Na_Dachy
Photo: Instagram C_H_E_B_U_R_A_S_H
Photo: Instagram Fistashka_NataShka
Another way to make palm trees from bottles is clearly represented in video instructions. Ready palm can be placed on a free place in the country area or decorate the flowerbed with it.
Watering from bottles with your own hands
Bottles can be used not only for decorative compositions, but also for the organization of drip irrigation. Such a design is especially good if the hosts are visiting once a few days (although in a very hot period of moisture coming from the homemade system, plants may not be enough).
To deliver water directly to the roots, each bustle has its own bottle. It can be inserted into it a narrow tube, one end of which to omit to the ground. Either, as an option, from one large bottle can be departed to plants several tubes. This is the easiest way to water.
Photo: Instagram Aleksandr0403reeco
Photo: Instagram DOM_V_DEREVNE
Photo: Instagram Hozyaistvo_Gazeta
You can also make microscopic holes in the bottle housing, put the neck on the hose, put the container on the bed and turn on the water. Such an improvised fountain is suitable for cultures that are not afraid of getting water on the leaves.
Photo: Instagram Ecodivno
Photo: Instagram Ryabuhaelena
Other resourceful daches hang bottles upside down on plants in greenhouse. Little holes are done in the traffic jam, the long cord is inserted, the end of which is summarized to the bases of the stems. Sometimes for greater efficiency and reliability instead of the cord, a real medical dropper is used.
Photo: Instagram Sadovira