Fencing from the grid is a widespread phenomenon at dachas and in private houses. Nowadays, you can not be limited to an old good slave, although it has a lot of advantages. There are other types of grids. Let's tell, what and how to install them.
Photo: Instagram zabor_71
Pluses of metal grids:
- they are strong;
- do not overlap sunlight by plants;
- simply mounted;
- cost cheap;
- With a neat installation, it looks aesthetic;
- Visually increase the area of the country area, as the fence is easy and transparent.
Types of grid
Rabita
Of course, there is almost no meaning to talk about its protective functions. But nevertheless, such a fence protects from the penetration of small animals. So that it should be copes with this task as much as possible, it is worth using a small chain chain: the size of square "holes" in it from 25 mm. True, the fence will come out heavy and not budget. Most often, grids with larger cells are used to facilitate the design - from 50 mm.
Photo: Instagram SDPartner
The woven chain grid is made of:
- soft iron wire;
- galvanized wire;
- Wire with polymer coating;
- plastic;
- of stainless steel.
Wireless wire is cheap, but it quickly rusts, therefore, usually such a grid is used as a temporary fence. To extend the life of her life, the country fence can be painted, but it will have to do it regularly.
Galvanized material or braided PVC casing serves from 15 years and longer. The latter option is especially good for regions with aggressive for unprotected metal medium: for example, with acid precipitation or near the sea. In addition, the PVC-coated grid looks more beautiful than the usual, as there can be different colors - white, yellow, green, blue, burgundy, red.
Photo: ISKM.ru.
Fences from plastic grids are extremely rare, although it happens. More often from this material on the site, non-vacant pods for animals are built or used to zoning the garden.
Photo: Instagram north.western.packing.center
Welded grid
She is stronger and tougher Rabits, requires less support for installation, looks more stylish, but it is more expensive.
The welded mesh is also not treated with anything, but itifies corrosion protected: galvanized, or with a polymer coating, or two in one - galvanized plus polymer. Sold in rolls and individual sections.
Photo: Instagram khaysarov.a
From the welded grid, 3D fences are popular recently. They consist of metal rods, which for protection against damage and rust, several layers of polymer, nanocheramic, zinc are consistently applied. Manufacturers promise that such fences will serve about 60 years.
Photo: Instagram GarantMetall32_57
How to make a fence from the grid yourself
First of all, it is necessary to determine how to establish a fence. Options Two:- pull the roll grid around the plot perimeter;
- Collect fence from individual sections.
The second way is more expensive, requires more effort, but it is more reliable and aesthetic first. Consider each option in more detail.
Tension fence
First of all, it is necessary to place a plot with wooden pegs and long twine, and then dig a pits under the poles. For columns, you can take metal pipes with a diameter of 6-8 cm and install at the same distance.
The pits make the garden brown, their diameter is not much higher than the diameter of the pipe itself. Depth depends on the density of the soil, on average - within the meter is allowed more.
Pipes in front of the installation are cleaned from stains, rust, old paint, weld to them hooks for fastening the mesh and paint. Then a small layer of sand or rubble poured to the bottom of the pits, lower the pillars, align and poured concrete. So that the supports stood smoothly while the concrete is frozen, they are fixed with spacers.
Photo: Instagram Zabortorg1
If the soil is dense, you can just score the poles to the ground, trying not to damage them. But on sandy soil, the fence will quickly "leave" to the side.
When the first stage is ready, you can start tensioning the grid. The roll roller is not unwound, and hold vertically and cling it for hooks or screw to the pipes with wire in several places.
But the welded roller grid, on the contrary, it is easier to unwind, lean to the columns and then consolidate it.
Since the welded grid is a bit more complicated in the installation, with a material having a polymer coating, it is better not to work independently: you need help, since the polymer is easy to damage, and then the grid will begin to rust.
In order for the fence, the grass does not let, between the grid and the land, it is recommended to leave a gap of 10-15 cm, and so that it does not allow - to attach a wire or a thin pipe along the upper edge.
Sectional fence from Rabita
The racks under it are mounted in the same way as described above. But instead of hooks, steel plates weld with them.
Metal corners are welded into a square or rectangle, the size of which is equal to the distance between the columns. From the inside of the corners throughout their perimeter, it is necessary to provide rods from the reinforcement: they will be needed for fastening the grid. The surface of the frame is grinding. The grid is cut in size in the size of the section, they are taped to the extreme rows of rod cells, bend them and weld to the corner. And the finished section is welded to steel plates on the supports.
Photo: Instagram Zabor_Tver.ru
Sectional fence made of welded grid
Installation technology is similar. Only for three-dimensional fences, the support elements are included and have holes for fixing the grid. The 3D fence is better fixed to the p-shaped clamps with a screwdriver. Theoretically, you can use brackets, but it is undesirable: they damage the protective layer.Decor of the fence
Volumetric 3D fences themselves look stylish and do not need to decorate. But the chain of the master with the pleasure of "upgrades". For example, weave patterns from wire or ribbons.
Photo: Instagram Sitkazahid
If you do not want the site to be viewed from the street, the fence can be reapped by photosette. This is a lattice canvases made of reinforced PVC, which manufacturers apply drawings with the effect of pixelization so that the image looks like natural possible. Fasten photos of the stapler. They are resistant to bad weather and sunshine, but the cleaning of abrasive means will not be able to survive.
Photo: Instagram Fotosetka_SPB
