Wanting to change the lifestyle, the family decided to buy a country house. Cottage comfort provided construction technologies and engineering systems. But the design of the design characteristic of the Scandinavian interiors, Novosylas were obliged to build architecture.
Our heroes, a married couple with a teenage daughter, enlisted the support of a specialist, designer Natalia Dashkova, in advance - at the preparatory stage of a country real estate transaction. And therefore, all the visited residential facilities were estimated not only with financial, but also with architectural, as well as planning points of view. The future place of permanent residence has seen clients with stylish, modern, environmentally friendly, and without excesses both outside and inside. It should be noted that the owners did not strive for the acquisition of the finished, but at the same time does not meet the desired criteria at home. They fully allowed another version of the development of events - the purchase of a plot without a contract and the construction of a brick or brusade building from scratch. However, fortunately, customers and designer saw a house located in a new cottage village in the suburb of Lipetsk. Its construction was fully completed, and the architecture, planning solution and the cumulative area, as a general conclusion, were simply ideal.
Photo: ideas of your home
Construction technologies used in building construction, also corresponded to the intention of customers. However, as it turned out, all components were in close relationship. The fact is that the cottage was erected according to one of the typical projects developed by the German company of the full cycle. And during its construction, the local, Lipetsk developer decided to try out the author's proposed author and repeatedly proven in Northern Europe the technology of multilayer panel-frame walls. The advantage of the latter - in high heat engineering characteristics, a small total mass of the structure and the rate of its construction. If the basis is prepared in advance (we note that in this case, the developer pretended to follow the recommendations of the German company, and therefore stopped the choice on the plane reinforced concrete foundation), then no more than 3 months go to the construction of a two-story house. Multi-layered
Panel-frame walls are permissible at any time of the year. In addition, the cottage of this type is not subject to the shrinkage, which means that finishing work can be processed immediately after the construction is completed. However, the technology had another important plus - due to the use of original external and internal enclosing structures uncharacteristic architecture for our country and the volume and spatial solution did not need adaptation modifications.
The glazing of the cottage, including panoramic, is performed on the basis of plastic systems with a three-digit glass. One of the stalk - the inner, facing room has a heat-reflective selective coating
We will tell you more about the planning structure. We note again: the metrarix and interpretation of the premises so corresponded to the needs of the owners that the designer was required only to competently distribute the volumes between functional zones, without dismantling and not ejecting in new places of internal partitions. In terms of building, the building is two conjugate rectangles of different sizes - the smaller part is connected with a greater at an angle of 45 °. The first floor is divided into two unequal volumes. Basic, publicly available areas - living room, kitchen, dining room - located in the maximum illuminated single space (53.2 m2); The dining group is put in the already mentioned small "rectangle" - with panoramic glazed and second light. Under auxiliary and isolated premises - hallways (5.4 m2), a hall with a staircase (10.3 m2), a guest bedroom (10.9 m2) and a bathroom (2.9 m2), as well as a shopping room (5.2 m2 ) - the part of the first floor is assigned, having smaller areas and insolation. At the second level, the parent bedroom (18 m2) and children's (12.1 m2) are posted on the second level (18 m2) and children's (8.3 m2) and dressing room (5.5 m2), and a dressing room (5.5 m2). Here, on the domestic balcony, "looking" on the dining group, a multifunctional space is equipped, which is designed to work outside the office and reading, and for the placement of friends (when the guest room is occupied).
The designer fully realized the potential of white color, not only visually eroding the boundaries of the premises, but also focusing on the few items of other tones
Most window outlooks are decided not to decorate. The curtains are provided only for the transparent entrance door in the living room area and panoramic glazing in the dining area
As for the design, the designer insisted on modern Scandinavian aesthetics with elements of ecosel, predetermined by the laconic architecture and the layout of the cottage. In the preparation of a colorful palette, the basis was taken as white, taking into account his ability to optically adjust the boundaries and strengthen the insolation. White in different proportions added natural tones of natural wood, various shades of gray and brown, black and ocher.Multilayer fence
The external enclosing structures served as multi-layered, manufactured by the factory method of the panel with a total thickness of 338 mm. At the heart of each of them - the perigel design, which is made of a wooden bar. The "frame" is filled with elastic plates with a thickness of 200 mm from the mineral wool insulation and from within the premises of the premises are trimmed with 18-millimeter sheets of GKLO. At the same time, a vapor insulation film is laid between the latter and insulation, which prevents the penetration of moisture into the thickness of the heat insulator. It is necessary because when wetting mineral wool loses efficiency. In addition, the vapor barrier film prevents the decoration of the wooden perigel design. From the side of the Street "Rama", a 15-millimeter drying plate and a 50-millimeter polystyrene foam plate are consistently fencing, on which a blacknish, reinforced with a grid, and finishing, polysiloxane, plaster are applied into two layers.
Light accents in the living room zone can be shifted in one direction or another. Enough, for example, change the angle of inclination of the floor of the lamp or turn in the other direction. Overhead Sofites
To enter the staircase in the reserved space, chose the design of the rotary type with running steps
The difference in approaches
With the arrangement of bathrooms in the Scandinavian countries, functionality is placed in the head of the corner, and the wet areas are equipped in the minimum area of the room. When working on this cottage, there was a similar approach. The main bathroom has a decent metrah, and it is very convenient to use the equipment placed in it very convenient - there are free passages between the SantechnoBors. At the same time, the interior is truly concise - the walls and the floor are posted a grayish-beige porcelain stoneware, a smooth tone of which revitalize the mosaic cladding of the bath and white screen, as if composed of parallelepiped furniture - single-legged cabinet with an overhead washbasin and a mobile low wardrobe.Transient mannevr
For finishing one of the walls in the studio and in the parent bedroom, as well as the ceiling on the second floor, the designer used the same parquet board that was used as an outdoor coating in residential premises. As is known, the material planks like laminate or parquet board are fixed with each other through locks. However, to secure the coating on the wall or ceiling, one castle compound is not enough. On the wall (we will remind, it is a frame filled with insulation and plasterboard plates covered on both sides) parquet strips were additionally fixed with glue, and the laying was led in the direction from the ceiling to the floor. The ceilings were blocked out of a bar, and to it with self-draws (silent through the spikes, to hide their heads) screwed parquet planks.
The internal balcony is one of the best viewgrounds in the house. Upon completion of landscape works, for the next spring, the view of the site will become more picturesque
In the cold season, the first floor of the building is fully heated due to hydraulic warm floors (with non-freecing ethylene glycol as a coolant). The volumes of the second floor, even the inner balcony and staircase spills are heated by high and not too wide two-column steel tubular radiators equipped with coolant temperature regulators
The problem of storage in the bedroom of parents was solved due to the chest, placed opposite the bed, and a box for linen under the lies. Access to the latter provides a lifting mechanism
Under one of the skates of the ceiling in the parent bedroom built a horizontal ledge from plasterboard. Behind him placed LED ribbon, highlighted headboard bed
My task was to support the architectural style of the cottage, emphasize its simplicity and at the same time originality. Plastic and the design of the facades are not typical for the chernozem, architecture closer to the Baltic, and the design was required to become her. As for the planning, she fit perfectly, and we did not redo anything - only competently put the furniture in the premises. Special attention was paid to only one question - we decided for a long time that the second floor was placed on the domestic balcony, we considered different options. As a result, several functional zones were combined at once - the office, the library and the guest bedroom. At the same time, the situation here is minimal - a sofa transformer, a duet of coffee tables and a lamp. In the unfolded form, the sofa turns into an extra bed, and in the assembled, coupled with tables and flooring forms a working area. Here, on the mezzanine, a small picture gallery is located - a well-known Lipetsk artist Yury Velik wrote a few cloths for this project.
Natalia Dashkova
Project author, Stylish decision studio
Suspended lamps are involved only in the zone of the dining room, where there is a second light. In their asset - spherical, as if woven from thin black strains, giving diffused light, as well as adjustable suspension height. In the rest of the zones, built-in lamps and swivel soffits are mounted
Tribute to Customers Environmental Topic - Two Churbachka, converted by designer in improvised coffee tables
The living area is visually separate from the other functional volumes of the studio (kitchen and dining area) with the help of an angular sofa. It is made up of two linear modules for seating and goat, providing more relaxed rest. In addition, the living room focuses the flooring with an adjustable angle of rotation and inclination of the lamp to the lamp and a carpet with a pest geometric pattern
The bathroom managed to place not only a font, which has very modest dimensions and is designed for water procedures in a sitting position, but also a spacious shower compartment in construction
| Name of works | Number of | Cost, rub. |
| Preparatory and Foundation Works | ||
| Marking axes in accordance with the project, layout, development, recess and backflow of the soil | set | 107 750. |
| Sand base device under the foundation | set | 17 600. |
| Device of monolithic reinforced concrete slab foundation with viscous reinforcement grids, frameworks and formwork devices | set | 79 100. |
| Waterproofing foundation | set | 8 800. |
| Other works | set | 10 700. |
| TOTAL | 223 950. | |
| Applied materials on the section | ||
| Sand for construction work | set | 19 350. |
| Concrete solution, fittings | set | 137 750. |
| Waterproofing membrane | set | 22 000 |
| Other materials | set | 9 000 |
| TOTAL | 188 100. | |
| Walls, partitions, overlap, roofing | ||
| Construction of a skeleton house with drying plates, facade work | set | 888 700. |
| The device of the pitched roof from cement-sand tile | set | 265 100. |
| Installing window and door blocks | set | 209,000 |
| Other works | set | 68 150. |
| TOTAL | 1 430 950. | |
| Applied materials on the section | ||
| Lumber, mineral wool (200 mm thickness and 50 mm), vapor barrier film, fire-resistant plasterboard plate (18 mm thickness), a dry-foam plate (15 mm thick), polystyrene foam plate (50 mm thick), reinforcement plaster and polysiloxane plaster | set | 1 034 350. |
| Vaporizolation film, mineral wool thickness of 270 mm, waterproofing membrane, cement-sand tile BRAAS | set | 304 200. |
| Plastic windows with two-chamber double-glazed windows, wooden doors (external), Barausse (interroom) | set | 770,000 |
| Other materials | set | 105 450. |
| TOTAL | 2 214 000 | |
| Engineering systems | ||
| Electric installation work | set | 90 350. |
| Installation of the heating system | set | 118 800. |
| Plumbing work | set | 84 950. |
| TOTAL | 294 100. | |
| Applied materials on the section | ||
| Materials for electrical work and installation of the lighting system | set | 121 150. |
| Equipment and materials for installation of water supply and sewage systems | set | 225 550. |
| A set of equipment and materials for mounting the heating and ventilation system (gas boiler, water warm floor, radiators, supply-exhaust installation) | set | 511 450. |
| TOTAL | 858 150. | |
| FINISHING WORK | ||
| Floor coating device from parquet board and porcelain stoneware; Facing of walls and ceilings with parquet board, paint and other work | set | 485 850. |
| Applied materials on the section | ||
| Tikkurila Paint, Coswick Parquet Board, Arkim Cerambar, Other Consumables | set | 773 650. |
| TOTAL | 773 650. | |
| TOTAL | 6 468 750. | |
* Calculation is carried out without accounting of overhead, transport and other expenses, as well as profit of the company. |