The facades of houses are facing the decorative stone using glue and suture grout at the average daily temperature not lower than 10 ° C. In the middle lane of Russia, this period lasts no more than six months, and the finish is often delayed or transferred. Is it possible to extend the work season or turn it into year-round?
Installation of decorative facing stone at an air temperature of 10-30 ° C and relative humidity no more than 80% is a prerequisite for curing adhesive compositions. Special "winter" adhesives help to expand the range of operating temperatures up to -10 ° C, however, while the masonry solution will not drop 70% strength, the air temperature should not fall below the value indicated on the glue package, otherwise the strength characteristics and the durability of the composition will decrease.
Photo: White Hills
The Ronson House facade system (Ronson / White Hills) allows you to mount a decorative stone without using wet processes, that is, year-round, at any temperature and humidity. The system is inherent in all advantages of the attached ventilated facade: efficient heat resistant, alignment of wall irregularities, durability and fire safety of the finishing stone, as well as environmental friendliness, high strength, low water absorption, frost resistance and non-causing. The design of the system ensures reliable fixation of the stones, and the precipitation and atmospheric moisture are removed from the surface of the facade naturally, without causing him the slightest harm.
Visualization: Igor Smirhagin / Burda Media
1 - wall; 2 - vertical profile of SV; 3 - insulation with hydraulic protection film; 4 - Ronson template for setting facing stone or clinker tiles; 5 - Horizontal Profile of PFC; 6 - a facade bracket with a gasket of thermal spacing paronite PP1, if necessary, with a lengthening slider box; 7 - Decorative facing stone White Hills or clinker tiles
Photo: White Hills
Photo: Kamrock.
Photo: Kamrock.
Photo: White Hills
Ronson House system allows you to attach scaffolding to the supporting structures at any stage of the facing (A). In the seams of cladding there is no grout, so the house breathes (b). Elements of the facade system are made of galvanized or stainless steel. The length of the brackets depends on the thickness of the insulation. The irregularity of the facade of more than 25 mm levels with the help of the Pok-C (B)
To use the decorative stone of our company in the system of the ventilated Ronson House facade, we gave it a special form. Thanks to her, each element can be removed without dismantling the parts located nearby, and then installed in place. For this purpose, the stone is shifted up to the stop, flexing the clamping petals fixing it, and take out. Point removal of cladding elements reduces physical and time costs when performing many works. Now it is possible to change individual elements or making communications as needed and even after the end of the cladding process.
Pavel Komarov
WHITE HILLS Development Director
Photo: White Hills