The floor of the tree is the most important element of the interior. True connoisseurs attract shades, drawings and textures of natural wood, the original appearance of which is supplemented at the expense of various surface treatment techniques.
Paul from parquet boards is a unique combination of classical traditions and modern technologies. The floor of the tree is the most important element of the interior. True connoisseurs attract shades, drawings and textures of natural wood, the original appearance of which is supplemented at the expense of various surface treatment techniques.
Photo: timberwise. | 
Photo: Corkstyle | 
Photo: Tarkett. | 
Photo: Tarkett. |
Photo: Tarkett. | 
Photo: Corkstyle | 
Photo: Corkstyle | 
Photo: Tarkett. |
5-8. Digital printing technology on a parquet board has been tied up with century-old traditions of quality and new colors. Drawings of medieval genius on half-brine boards, colorful vintage, newspapers convert outdoor coating into an unusual expressive agent.
Photo: Bauwerk Parkett | 
Photo: Bauwerk Parkett |
9, 10. Vintage Edition Edition (Bauwerk) is not three, but two layers. Upper - from oak (4mm), lower - from bars of coniferous wood (7mm).
Photo on the floor
The technology for decorating parquet boards by means of digital printing enriches the natural beauty of the tree with original modern drawings. Manufacturers use innovative methods for applying flowers, a wide range of shades and skillfully combine them with the texture of each board. Avybrav coating a class of wear resistance not lower than 33, you can be sure that the decor will remain unchanged for a long time. Among the companies representing this product on the Russian market - Corkstyle (Wood and Loft Collections), Kaindl (AUTHENTIC OAK), TARKETT (PERFORMANCE FASHION).Repair without problems
A parquet board was designed as a comfortable and easy-to-install flooring. The auction "floating" method (without hard fastening of elements to the base) provides such important quality as maintainability. The material is bought with a slight margin. It will be needed to repair the damage to the floor, for example, when dropping heavy or sharp items capable of breaking the board. In this case, professional stackers in just 2-3 h shifted furniture and disassemble the coating to a broken fragment. Together with a spoiled board, the whole range will be removed, they collect the remaining elements, and the new one will be laid along the wall so that they do not stand out on a general background. So, painlessly and quickly can be repaired the coating, remove the lossed boards in the zones of active walking or replace the toned floor to a new, without fulfilling a long and expensive work during the repair of floor coverings - the preparation of the base.
Change tone
Dreaming of pink, green, red or blue floors with natural texture and wood pattern, we also wonder if it will be possible to carry out such a desire? Of course, it will be possible to help tinted parquet boards.
Photo: Panaget. | 
Photo: Upofloor. | 
Photo: timberwise. | 
Photo: Panaget. |
11. Price 1M2 Single-band boards Collection Otello (Panaget) - 5070 rubles.
12. The cost of 1M2 single-band board of the ART Design collection (UPOFLOOR) - 3990 rubles.
13-15. Outdoor coating of gentle pastel shades bring the feeling of lightness to the interior. Dark floors give stylish, especially in combination with bright walls and bright decorative elements.
Photo: Haro. | 
Photo: Upofloor. | 
|
To change the shade of wood, manufacturers use different compositions. The floor covered with oil impregnations is valued for environmental friendliness and aesthetic appearance. Such impregnations penetrate into wood deep and securely protect it from external influences and water entering.
Colored varnishes form a thin film on the surface of the floor, which turns the light oak parquet into a possover pear or a brownish nut. Fans of exotic will probably like boards, sprayed with radically yellow, blue or green paints.
When choosing tinted parquet boards, pay attention to their design and be sure to ask the possibility of grinding the coating. (The bar plates are laid by the "floating" way, and not all the masters are taken over the thin grinding of such a floor.) It is important to remember that specialists do not recommend to apply lacquer on the boards previously covered with oil, as oil impregnations are deeply penetrated into the wood, and they are difficult to remove from the surface . Taking into account these nuances, after a few years it will be easy to change or update the color of the floor.
Opinion of a specialist
Some European manufacturers as the basis (middle layer) of the parquet board began to use high density wood fibreboard (HDF). Auxerous, a decorative layer of a valuable tree of wood is made quite subtle, our collections Wood and Loft it is only 1mm. HDF is less susceptible to the effect of moisture drops and a denser of the traditional base of coniferous rocks. The load when moving along the floor takes exactly this solid inner layer, and the thin upper one is not even the shoes with sharp heels. In addition, the thin layer of veneer allows to reduce the cost of flooring and expand the palette of the wood used due to expensive, exotic tree species.Alexey Ivanov, Director of Corkstyle Development
Important differences
An ordinary parquet board is, as a rule, a three-layer bar, the upper layer of which is made of a valuable tree of wood (3.5-4mm). The following two are made of cheaper wood of coniferous rocks. Each layer is focused perpendicular to the previous one. Reliably glued with each other, they interfere with the natural movement (expansion and compression) of the material and make a parquet board with more rigid and resistant to temperature and humidity changes than the planks from the wood array. Larction of prices for 1M coating is great: from 1720 rub. For the board from oak (barlinek) and up to 9900 rubles. For the board from American walnut (Coswick).
Photo: Upofloor. | 
Photo: Goodwin. | 
Photo: Upofloor. | 
Photo: Tilo. |
18. Bright floor of the ArT Design Collection Board (UPofloor), the price is 1 m2 - 3990 rubles, allocates furniture and other interior items, enhances natural lighting.
19. Single-band parquet board "Marrengo" series "Classic" (Goodwin), upper oak layer, with deep silver braching, covered with varnish, cost 1m2-4300rub.
20, 21. Fans of contrasting black and white combinations can choose floors of light, dark colors and their variations.
Parquet boards of other construction in everyday life called "technomascus." The fibrillery plate of high density (HDF), decorated with a veneer of a natural tree (with or without photo printing) with a thickness of a natural tree (with or without photo printing) with a thickness of 0.6-2 mm and protected by several layers of varnish. The bottom is another stabilizing layer of veneer wood and sound insulation cork substrate. The cost of 1m2 coating starts from 1360 rubles. For the oak board (Golvabia) and reaches 6815 rubles. For Olive Board (PAR-KY). The floor from such elements will serve at least 15 years without visible changes. Judge for yourself: if we glue the paper to the metal sheet, it is difficult to sell it with a heel, since the main burden takes on the metal. While the paper on a wooden slap from a conifer breed is undoubtedly sold under the influence of an acute subject. This principle is used in the new parquet board design with the basis of a dense and solid HDF-slab. From abrasion, the veneer protects seven layers of wear-resistant varnish. Inesl update this coating in a timely manner, the floor will be even longer. Many experts believe that the future is behind the Tekhnomissive, which unites the best quality parquet board and laminate: practicality, convenience and availability.
Comfortable warmth
There are still disputes, whether it is possible to combine the systems of the warm floors and floor coatings from the tree. Opponents of this believe that the warm floor causes an additional drying of wood and leads to the formation of cracks between individual plars, as well as to their warp. Defenders argue that high-quality parquet board, made of a carefully selected and dried by special technologies of wood, has high stability and is quite suitable for the arrangement of warm floors. Naturally, subject to certain recommendations, among which the uniform distribution of heat throughout the floor and the strictest ban on the temperature rise on its surface is more than 27 C. This also applies to areas under furniture or carpets (they should not be too thick). Another nuance: a beech or maple wood is most sensitive to a change in temperature and humidity and is not suitable for a warm floor. For him, stable wood species are chosen: oak or tick.