Most of us when buying a kitchen, set themselves the task of equipping it comfortably, functionally, practical, aesthetic and at the same time somewhat saved. The task is not from the lungs. Especially since the built-in kitchen furniture (and the technique) is acquired on the principle of "all and immediately"
Most of us when buying a kitchen, set themselves the task of equipping it comfortably, functionally, practical, aesthetic and at the same time somewhat saved. The task is not from the lungs. Especially since the built-in kitchen furniture (and the technique) is acquired on the principle of "all and immediately"
Buying a new kitchen in the life of any family is an event of a large scale (there is a repair of the room, the choice of furniture, technique, functional filling, accessories). Before you go to the kitchen salons and begin communication with consultant designers, you yourself must have a clear idea of whether you can't do in the kitchen, and what you can donate, based on your budget, the features of the space where you will " Insert furniture and equipment, and family composition.
| 
| 
|
1. Glazed Farm neoclassical cabinets continue open modules that are convenient for storage and are an alternative to railings. Such sections can do cheaper cabinets with deaf facades.
2. The lack of decorative elements in the VEGA Plus kitchen is filled with a variety of inserts in the facades.
3. The mechanisms of complete extension increase price the kitchen, but it is not worth saving on this. Dear organizers from the array can be replaced with similar plastic
There are three "main" directions, which should mainly concentrate their attention. This is the frontal part of the furniture composition (facades), work surfaces and the internal organization of cabinets and boxes, the so-called filling. For each of these positions and you need to choose the optimal option for you in the appropriate price category. Take about it and talk.
Economy ads
1. The more simpler the design of kitchen modules, the cheaper the whole set will cost.2. For radius items, you pay for about two times more than the direct.
3. It is more profitable to order one module with a width of 90 cm than two similar 45 cm.
4. Retractable drawers, swivel and exit elements increase price the kitchen. However, to refuse them completely means to deprive yourself of everyday convenience.
5. Upper hinged cabinets with open opening cheaper than wardrobes with doors folded up. The cost of the upper cabinets is directly proportional to their height: the higher the cabinet, the higher and its price.
6. Facades in the aluminum frame or stained glass windows are more expensive than deaf fronts from economical materials.
7. Countertop of artificial, and even more so natural stone is more expensive, for example, countertops made of laminated chipboard.
8. Savings on the accessories obviously reduces the life of furniture and comfort of use.
It all starts with facades
Facades, or fronts (here include cabinet doors, front panels of retractable and exit structures), - the front side of the kitchen. Now, there is a considerable daily mechanical load on their "shoulders". In addition, even with the most accurate use, you will still leave the traces of your stay in the kitchen and culinary creativity on the panels. You should choose facades not only on the principle of "I like", but also with confidence in their endurance, the ability to withstand the "long distance" with a length of 10 (or more) years. The price of facades directly affects the total cost of the kit, and significantly.
| 
| 
| 
|
4. The illumination of cabinets increases the cost of the project as a whole, but increases the level of comfort of use.
5. Facades from painted chipboard (Nolte Kuchen) and MDF, lined with PVC film ("Likarion").
6. The facades of Kitchen "Stella" are made of MDF with an expensive, but very practical coating "acrylic plastic", which simulates high gloss.
7. The facades of the Kitchen "Margarita" are made of MDF covered with film, and protected from damage during operation by an Italian aluminum mortar profile
Materials from which facades make are divided into structural and finishing (facing). Calcuted first chipboard, MDF, wood array, glass, less often metal. A new generation SDSP employs many manufacturers, and not only manufacturing budget cuisines, but also those that produce medium price categories (for example, Nolte Kuchen). Chipboard decorated with films, veneered with a veneer, covered with varnish, enamel. The best chipboard is the German (formaldehyde emission class). MDF - Material with high moisture resistance and good mechanical characteristics - use for the manufacture of furniture of all price categories. Kitchens with fronts from it are widely represented in the model ranges of almost all foreign and leading domestic manufacturers. MDF products can be given any configuration, including curvilinear (bent facades).
The solid array in the production of kitchens is used extremely rare, and only in the form of a frame, and Pilenk (insertion) is usually made from MDF lined with veneer. Most often used not a solid array (it is very capricious in operation), and the so-called typesetting tree. The technology is as follows: Flames are cut from pre-dried wood and collected in the shields on special technology. In addition, multiplex is used - plates glued from a thick veneer of the tree. Compared to a solid array of multiplex more moisture buildings, it is practically not deformed, but is well flexible. Massif furniture produce, for example, Arca, Berloni, Ernestomeda, Scavolini, Verona Mobili, "Kitchen Dvor", "Likarion", "EKOMEBEL" IDR.
Platular materials need to decorate with a variety of films, plastics, natural or reconstructed (farynet) veneer, in the coating of paints, enamels, varnishes, etc.
For many years, painted facades from MDF have been used by special love of consumers, first of all lacquered with perfectly smooth on both sides with a deep mirror glitter. Manufacturers offer many variants of decorative solutions (high gloss, matte and structural varnish, enamel, enamel with special effect). However, the kitchen with facades from MDF in high varnish in the most modest estimates will cost from 16-20 thousand rubles. For 1 p. M. Ando to be ready that each dusty and every fingerprint are visible on the mirror plane. True, glossy facades are easily cleaned. On the surfaces of the matte and structural varnish traces of the fingers are not so noticeable or not noticeable at all.
Kitchens with facades made using the "painted MDF" technology, produce "Kitchen Dvor", "Likarion", "Maria", Alno, Darina, Hacker, Leicht, Nolte Kuchen, Pronorm, Schuller, as well as dozens of Italian companies, in particular Berloni , Del Tongo, Scavolini, Snaidero Idr. The most interesting proposal today is perhaps the facades from chipboard with plastic finish - with any decor, including under the tree, and under high varnish, with edges from PVC, 3D Acryl, Raukantex Visions (Rehau) and an aluminum profile. Facades, "dressed" in paper-layered plastic, can be recommended to owners of small kitchen premises, young families with young children. They are extremely racks for abrasion, scratches, shocks, possess the light, heat and moisture resistance, are immune to the effects of household chemicals. One mongon meter of kitchens with facades, lined with high-quality plastic, costs about 16 thousand rubles. A little more than the facades of the new generation - from MDF and acrylic plastic or parapan, imitating high gloss. They are characterized by a high degree of reflection (the effect of the mirror) and saturated, sustainable color. Kitchen with Fronts "MDF Plus Acrylic Plastic" will cost about 17-20 thousand rubles. For 1 p. M, and with the fronts "MDF plus Parapan" - from 22-30 thousand rubles. For 1 p. M. The latter is, for example, from Giulia Novars Factory "Maria".
The most democratic view of the facades is a film trimmed. Price - from 4 thousand rubles. For 1 p. M. Kih advantages include a large selection of decors and colors. But, unfortunately, these surfaces are not designed for the long-term service. They are very afraid of temperatures above 100 s. The situation when the film is peeled in the oven zone from the adjacent locker or the box is quite typical.
Countertop - no day without rest
The technical aspect of the workplace, where the sacrament of cooking is performed, is undoubtedly important. However, in the creation of a harmonious image of the kitchen, the appearance of the countertop plays a dominant role. The inventory salons of kitchen furniture are represented by models for every taste and budget.
Consider the advantages and disadvantages of the proposed options.
Let's start with the classics of the genre - natural stone (marble, granite, sandstone, Labradorite). Working surfaces from it are uniquely beautiful. This is an ideal place for processing many products, besides on a fruit stone, they remain fresh. However, on the stone countertops, first of all traces of the hostess activity remain inevitably. There are such models are expensive, and the care of them is troublesome. Working surfaces from a set of wood are certainly beautiful, especially in the interiors weathered in country styles and classic. With proper care (processing with special oils, wax), they will serve for a long time. Wooden countertops are vulnerable, but they can be restored by polishing small defects and covering oil. The wiscer-resistant and hygienic (truth, not cheap) are considered working surfaces from stainless steel.
| 
| 
| 
|
8. The tabletop from natural marble with its noble beauty organically fits in the context of the classic kitchen.
9. The facades of the Kitchen "Lera" are made of chipboard and coated with acrylic plastic. The countertop from the artificial stone continues the "apron" from the same material - it is very practical.
10. For countertops, Leicht kitchens used quite rare material - volcanic stone. It is distinguished by strength, smooth non-porous structure, resistance to various kinds of influences and beauty, which will make stay in the kitchen as comfortable for work and recreation.
11. From the artificial stone you can make a beautiful, practical and relatively inexpensive compared to the natural stone table top of any form
The dream of many owners is an artificial stone countertop. Artificial stone is a collective name for various kinds of composites consisting of acrylic resin and mineral filler. It is leaf and liquid. Liquid is a relatively new material that is applied with a spraying and is often used for facing complex surface configuration, receiving seamless designs, such as table tops with washing. Leaf artificial stone with a large content of mineral filler approaches the characteristics to a natural analogue. Supply it in the form of plates with a thickness of 3 to 12 mm. Sheet blanks glued together, thin sheets often stick to the basis of the chipboard and MDF. Artificial stone produces DuPont, Hanex, LG (Hi-Macs), Ligron, Montelli, Porcelanosa Grupo (Krion), Samsung (Staron) IDR. The main consumer properties are strength, the density of the structure, due to which it does not absorb dirt and moisture, a huge selection of color solutions. Defect places are grinding, polished, and the table top looks like a new one. Cost of products - from 11 thousand rubles. For 1 p. M depending on the thickness and decorative design (canvas can be monophonic, with streaks or various special effects). Beautiful (rich color palette and textures), durable, hygienic, resistant to mechanical and thermal effects of models made from Silestone, Quarlla, Quarzelan, Plazastone and Quartzelit - Quartz agglomerate (price - approximately 20 thousand rubles. For 1 p. M) . Internally combined the natural base (about 90% of the composition is a quartz crumb) and advanced technologies.
If you need a kitchen table, which is not afraid of daily intensive exploitation and at the same time inexpensive (from 3 thousand rubles for 1 m), - choose a laminated plastic model from a 38mm thick chipboard. Hot pots (up to 180 c), oil, wine and other drinks will not leave a trace on it. Products are durable, resistant to damage and influence of chemicals, their smooth surfaces are easy to maintain clean. Wet segment has proven themselves egger countertops. The multilayer structure and compounds are in the composition guaranteeing paper-layered plastics excellent quality.
Comfort from the inside
As for the economy due to the internal filling of cabinets and boxes and the failure of the field and rotating storage systems, then think whether you will be comfortable if it will have to get to the contents of the cabinets, standing on your knees and bent into three deaths. Aiz absence of elementary separators and liners in the boxes in the boxes will be held in a bunch. Unlikely. Especially since all sorts of trays, mobile dividers, inserts for cutlery and other useful accessories can be made not only from expensive steel, aluminum, array, but also from cheap plastic. Do not deny yourself a storage system with containers already provided in it and covers with covers for bulk products. They are comfortable and aesthetic. There is such a system with six tanks is not cheap - from 4 thousand rubles. (Box width - 600mm) and from 5 thousand rubles. (width - 800mm). But this is your contribution to your comfort. Adla storage of detergents There are specially organized boxes with a sealing and siphon. They are designed so that sponges and brushes, garbage bags and paper towels will always be at hand. Drawer cost - from 5-6 thousand rubles.
| 
| 
| 
|
12. You can equip the cabinets not only by modules with hinged doors, but also allow you to save by swing doors and open niches.
13. Cutlery, neatly laid out in the full-shot upper section under the tabletop, will always be at hand.
14. Exit and swivel angular structures will allow you to place all the kitchen utensils. The levels of the built-in design are moving independently of each other.
15. Bottles can be built not only in the lower, but also the top tier of the kitchen.
| 
| 
|
16. Convenient loading from top to bottom has become possible thanks to Lemans - solution for corner cabinets, which ensures maximum use of the area.
17. For the hidden doors today, not only static, but also the retractable shelves are hidden. They will slightly deprive the kitchen, but will provide access to the contents of the shelves and a good review.
18. High wardrobes of columns are ideal for storage and embedding technology
Retractable and swivel systems with complex mechanisms significantly increase the price of the kitchen, but they precisely make it ergonomic, convenient to operate, provide order in the cabinets and facilitate the work of the hostess. It is not at all necessary that all the cabinets are equipped with them. This is too. Especially in a small kitchen. Order one end with full-digit boxes equipped with closers and shock absorbers and equipped systems of the organization - the cost of the kitchen will grow slightly, approximately 10%. Add to this in the cooking zone of an outbound cassette-bottle-bottle 15cm wide, which costs only 1.5-2 thousand rubles.
If you have an angular layout of furniture, you will certainly need a spinning angular element or some exit system. The cost of such rotary elements depends on the degree of complexity of the mechanism, the number of shelves (or grids). For example, the standard Kessebohmer carousel for the corner tube with two tiers costs 8 thousand rubles, with four - approximately 15-16 thousand rubles, and with eight - about 19 thousand rubles. The tetached manufacturer has a model with a rotation not at 360, but by 180 in 5-6 thousand rubles.
High-class accessories and "filling" for kitchens produce in Europe: Blum, Hailo, Hettich, Grass, Kessebohmer, Salice, Vauth-Sagel, VIBO IDR. Components of these brands use all European and leading Russian manufacturers.
Table Look in the magazine "The Ideas of Your Home" No. 10 (166) p.102, 104
The editors thanks the representative office of the company in Russia Nolte Kuchen, the company "Kitchen Dvor", "Likarion", "Maria", "Ekomeber" for help in the preparation of material.