Under the canopes of maples

A two-tier frame-modular house with a total area of ​​500 m2. Large windows - showcases, stretching almost throughout the perimeter of the building, give the structures extraordinary ease

Photo I. Kowuzov

To achieve the greatest harmony of the architectural structure and natural environment, the wooden building made one-story and low, so that it organically fit into a natural landscape

Large windows-windows, stretching almost all over the perimeter of the building, give the design an extraordinary ease. Due to the fact that the windows are drawn into the depths of the site, the privacy of the life of its inhabitants is fully saved

The living room room has an elongated shape. However, this feeling can be significantly smoothed, because the representative zone is visually expanding due to panoramic glazing

The construction technology of the house does not require finishing works. Here are structural elements, such as metal connecting bolts, fastening wooden parts of the frame, play the role of peculiar decorative parts

Kitchen furniture is located linearly along the end wall. Its clear geometric shapes pick up a rhythmic pattern specified by the horizontal beams of the frame included in the interior. Exactly selected and the color of the kitchen facade tree, corresponding to the veneer tone on the beams

One of the guest rooms now serves as a convenient office: for this, a writing desk, leather chairs and a lightweight rack for books are provided here.

The spacious hall of the guest zone overlook the doors of two bedrooms, designed for those who came to buy friends or relatives, as well as the door of the bathroom

An important role in the decorative design of interiors plays painting. Elegant still lifes and spectacular abstract canvases, carefully selected by the designer for each room, bring expressive color accents into a strict minimalist interior, creating a certain mood

In order not to disturb the perfect rhythm of the beam overlap, the ceiling lamps placed quite original. They were mounted in the upper part of the structures, so the light flux is directed upwards. The device itself is practically not visible, and the light, reflecting the ceiling binder, evenly fills the room

In the trim of the bathroom and the dressing room actively used wood - veneer and oak parquet board, - what makes these "technical" rooms with more cozy and "warm"

Magnificent panoramic review, thanks to which the visual border between the interior and the external natural space is practically erased, one of the most significant advantages of this small building can be called one of the most significant advantages.

Since the floorboard is laid in the bathroom on the floor, there were no "traditional" warm floor for these premises, but installed water heating radiator

A large square window has become a real decoration of the master bathroom - it not only admits the flow of daylight, but also opens a beautiful view.

PREFABRICATED HOUSES technology (more short-prefab), that is, a way of building buildings from large modules, today is becoming increasingly popular. Indeed, with a similar organization of the "Palace" process, as in a fairy tale, may increase if not in one night, then in a few days. The house, which will be discussed in the article, was built precisely this method.

Photo I. Cowase This building is located on the border of the forest and an open picturesque space. The wall of high slender trees on the one hand, expressive perspective, with the other ... It is difficult to imagine a more successful place for a country home. Yes, a small man-made pond, skillfully decorated under natural reservoir and introducing elements of the missing aquatic element in the overall picture of the landscape. Such favorable conditions were most used as an architect. He skillfully fited the building into the surrounding landscape, not only without destroying the natural harmony, but also by providing the owners of the house an excellent opportunity to admire the surrounding beauty, without leaving the wonderfully equipped apartments.

Harmony and clarity

Photo I. Cowonov In Plan, the construction is an open chamber of central volume and two perpendicular wings. The choice of such a form of the house was largely influenced by the configuration of the site approached for construction, as well as the desire to preserve the most economically growing on the territory of the adult trees - the picturesque group of high maples. Such an architectural organization of the building was very convenient for the arrangement of various functional zones, each of which exists is separately and at the same time is associated with the rest. The largest wing of the structure is assigned to a representative area: there are a living room, a dining room and a kitchen. Moreover, it is possible to get here not only through the central entrance, but also through sliding glass doors (they lead on a wooden terrace adjacent to the end part of the wing). The second wing of the building occupy apartment owners: This unit includes a bedroom, a comfortable bathroom and a dressing room. Assue is a queue, in the central part of the house, which became a kind of link between the private and public half of the construction, organized two guest rooms, and next to the nimi-compact bathroom with a font.

In addition, there is a full-fledged underground floor in the house. Most of it is assigned to a garage, designed for several cars. There is also a spacious pantry. Finally, the remaining area occupies a relaxation area with a sauna, a room for water procedures, a bathroom and a cozy holiday room. The boiler room in which the heating equipment is installed is located separately in the angular room of the first floor (you can directly into it directly from the street).

Developed process

The main feature of the building is that during its construction, modular construction technology has been applied. The building, or rather, its ground part is a prefabricated frame structure, which consists of several large blocks made in the factory. This method of house production has a number of advantages. Obviously, the industrial method of manufacturing construction modules in a specially equipped shop provides an ideal fit of all parts. To the same unit, all communications (wiring, water supply and sewerage pipes) are immediately laid at a well-wiring diagram with the most efficient distribution. At the same time, the plumbing and built-in furniture are mounted, the elements of the interior decoration are performed. Then, when the foundation has been completed, the already collected modules transport to the place of construction and in a matter of days are connected to one whole. In general, there was only 3 weeks to assemble at home. So much more time demanded the coordination of the project. After all, the existing developments created by Pagano conducted construction work should have been adapted to an individual plan, its specifics associated with the design of the architect. In addition, it was necessary to adapt Italian technology to the Russian climatic conditions and requirements of regulatory documents (Pagano typical designs provide large space for formation).

Thoughtful structure

The main building material is a glued timber: from it the bearing elements of the wall frame, as well as the rafting roof system. Multi-layered house walls. Outside, they are insulated with extruded Polystyrene Styrofoam (Dow Chemical, USA) with a thickness of 150mm. The insulation from two sides is sewn with a larch board (15mm), which, from the outside of the construction of a red-tree veneer (Iroquo). Inside the walls are trimmed with Fermacell (Xella, France) gypsum, plastered and painted in white. Almost the same composition - the "cake" of the roof, only an additional waterproofing is laid over the insulation. Punching of roofing material at double sections is used cedar gear-light, durable due to the properties of wood and spectacular in a decorative plan, as it gives the wooden house a finished image. A ventilation gap (40mmm) was left between the roof and wooden roof cage. The central part of the house has a flat overlap: on top of the waterproofing layer was made of larch from larch.

Policy openness

An important feature of the house, which largely determines its appearance is the maximum "opening" of the internal space in the natural landscape. Turn it is achieved at the expense of panoramic glazing. For example, the representative area of ​​the house is almost completely open from three sides, so, being here, you can feel the resting picnic under a clear sky, and not in a comfortable country house. The same effect is achieved in the master bedroom: the two walls are turned into huge windows. Each of the residential rooms, as well as the living room have exits to separate covered terraces adjacent to the construction. To enjoy the freshness of the morning or the spicy aroma of the evening, it is enough just to stand for a bedroom threshold on a wooden flooring. The location of the windows is also largely connected with the orientation of the house on the parties of light. So, the main facade of the building, addressed to the access road, goes to the north. Therefore, it is made as close as possible - it is only small windows of office space. Now, the South side is almost fully accessible to sunlight, and it is here that the main residential areas are located. Moreover, the wing in which the bedroom is placed, looks east, and the rising sun gives the owners their first rays. Assue, the living area went to the western wing, so that, resting in the evening, it was possible to enjoy the beauty of nature, lit by the setting sun.

Easy and elegance

Technical data

Ground floor area (ground part) 250m2

Square underground part 250m2

Designs

Building type: frame-modular

Foundation: monolithic reinforced concrete tape type, depth - 3.5m, horizontal waterproofing - waterproofing membrane

Walls: frame-panel, full factory readiness, including finishing and laying of communications; bearing element-glued timber, solid doom (larch 15mm thick); Heat insulation - extruded Polystyrene Styrofoam (150mm); Outdoor decoration of larch, Veneer Iroko; Internal insulation, Soundproofing - Wooden-cement panels Eraclit (Italy)

Overlapping: Wooden (glued timber), thermal insulation- styrofoam (150mm), larching

Roof: over the central part of the building - flat, above the side wings - duplex, the construction of the rafter, liner-glued timber, thermal insulation - styrofoam (150mm), waterproofing - waterproofing membrane, solid doom (larch), ventilation gap- 40mm; Roofing at dizard plots - cedar shingles

Windows: Wooden with double-chamber windows

Terraces: built-in with deciduous flooring

Life support systems

Power Supply: Municipal Network

Water supply: Square

Heating: Two-incident Gas Copper (Germany), Tubular Water Heating Radiators

Sewerage: Septic and Biopilter

Ventilation: with natural motivation and frying air exchange scheme

Interior decoration

Walls: Fermacell Hypper Panels, Plaster, Paint, Larch Finishing Board, Iroquo Veneer

Ceilings: Fermacell Gypsum Bar, Plaster, Open Building Farms, Lined Iroquo Veneer

Floors: Oak Parquet Board Margheritelli (Italy)

Plumbing: Flaminia

Lamps: in Bedroom - Baroviertoso (Italy)

Electrical equipment: Legrand (France)

Explanation of the first floor

1. Porch 7m2

2. Tambour 4m2

3. Hall 21m2.

4. Wardrobe 7M2.

5. Bathroom 3m2

6. Living room - Dining room 57m2

7. Terrace 20m2

8. Staircase 6m2

9. Boiler room 7m2

10. Hall of sleeping zone 14m2

11. Cabinet 14m2.

12. Guest bedroom 16m2

13. Guest Bathroom 6m2

14. Terrace 13m2.

15. Master's bedroom 29m2

16. Bathroom 12m2

17. Wardrobe 6m2

18. Hall 6m2

19. Terrace 10m2

The setting of the bedroom is extremely simple. A large bed with a soft, covered genuine leather headboard and a concise wooden dresser is harmonized with a clear geometric pattern of a tree and ceiling beams, contrastingly stand out on a light background of wall sheat and ceiling. A pair of bedside tables on elegant bent metal stands makes an element of a relaxed game. Strict geometry in combination with natural materials is present in the design of the bathroom. Rectangular shapes acrylic bath, sink and spacious shower cabin Flaminia (Italy) are so naturally included in the interior that seem to continue the architectural composition. It will not be a great exaggeration to say that the house itself is perceived as a holistic organism in which each detail is in its place. The result is created an image of a clear and harmonious space, where everything is intended for a relaxed comfortable stay.