How to flatten the adjoining of flexible tiles to the capital designs of the roof - walls, smoke and ventilation pipes to ensure reliable waterproofing of the responsible joint? In construction systems, TechnoNIKOL, this technology has been worked out to the smallest detail and includes several operations.
Consider the installation of adjustment on the example of a chimney, like a more complex design having four sides.
The first operation is a pattern from Enemanonikol fundamental carpet. This is a special material having a non-burning basis, with bitumen-polymer impregnation and sprinkling face with small quartz sand that protects the surface from exposure to ultraviolet. The pattern is done in such a way that 30 cm of the material came to a vertical surface and 20 cm - to the surface of the skate.
Photo: Tehtonol
Photo: Tehtonol
Before laying patterns, the surface of the pipe must be prepared - plastering and make a 30 cm on a height of 30 cm around the perimeter. Roger is a small groove of 1-2 cm. Following the surface of the pipe, which will be closed with an новановная carpet, primer Tekhnonikol is applied - special water emulsion of oil bitumen For the primer of concrete, foam concrete and brick surfaces of building structures. Primer TechnoNIKOL has a high penetrating ability and dries quickly. The most important thing is that it allows you to create a more reliable clutch (adhesion) with an olemnaya carpet.
You can begin to lay an еnde-in carpet and other structural elements. The first mounted pattern of the front side of the pipe. At the entire back of the pattern, a bituminous mastic Tehtonol Fixer is applied, after which it is attached to the pipe and adjacent shingles of the flexible tile. In the same way, the second queue is attached to the pattern of the right and left sides. It is important to consider two points here. First, the edges of the left and right grid should go a little on the front pattern. Secondly, the lower parts of the pattern are stacked on the lining carpet.
Photo: Tehtonol
Photo: Tehtonol
In conclusion, the pattern of the back side is mounted, also with an occasion on the patterns of the left and right side.
So, the waterproofing "Endament Apron" is ready. Now it is necessary to ensure the protection of the upper edges of the omene carpet. To do this, a special metal apron is inserted into the perimeter - it is included in the assortment of roofing construction systems Tehtonikol. The apron is screwed to the pipe, and the box is filled with the facade sealant.
Photo: Tehtonol
Photo: Tehtonol
The final stage. From the back and side sides of the pipes are attached to the shingles of the flexible tile technoNonikol Shinglas, which must be smoothly cut off the pipe from the pipe by 7-8 cm. We note that with the front side, the renewed carpet is on top of the flexible tile.
So around the perimeter of the pipe is formed a peculiar chute from the olemagna carpet and flexible tile, allowing you to effectively remove the water from the pipe.
Photo: Tehtonol