Overview of the built-in vacuum cleaner market: the device, the principle of operation and dignity of the device. Installation of the autonomous system of dusting in the house and apartment
The Jolly model (SISTEM-AIR) does not need a network of pipelines. It is mounted on the wall inside the room
In the apartment, when choosing a place of installation of the power unit, you have to consider unwanted noise, interior design, lack of area and even the protests of neighbors
Representatives of the VACUFLO model range with True Cyclonic cleaning and cleaning kit "Deluxe"
The model with the built-in pneummatore allows you to shorten the pipeline network: A- S1570 (VACU-MAID); BVC MIT Siemens Motor)
Enable / disable the built-in dusting system using a switch located on the hose handle facilitates and simplifies the execution of many cleaning operations
Schemes for the structures of power blocks: A- with "cyclone" and cartridge filter (DISAN); B- with the top of the filter bag (SilentMaster)
The scheme of the ASTROVAC aggregates with a self-cleaning membrane filter. When the block is turned off the membrane, the dust shakes in the dust collector
In the Enkem units, double filtering technology Double Filtered System, preventing the primary cartridge, allows it to work without replacing 2 years
Scheme of the VACU-MAID split system with a separated motor unit and a filter separator. Noisy block with an engine can be placed away from residential premises
Long-term cartridge filters are made of paper or fabric. They have a filter surface
Square 2-8 thousand cm2
The stretching hose is convenient for storage (length - 2.4 m, stretches to 10m), but rather heavy due to a metal frame
Cleaning hoses: A- for wet cleaning with water supply tube;
B- for dry cleaning
Wall pneummators are diverse in shape, color and sizes
Outdoor pneummators made of metal
Radio receiving device (A) and radio transmitter (b) for wireless dust removal system
Pneumature for open installation
Pneumature wall is non-contact
Cleaning nozzle for cleaning solid coatings (parquet, laminate, tile)
Nozzle for cleaning pile coatings
The built-in vacuum cleaner will not only gather dust from the floor, but also help carefully cleaned clothes.
In addition to the standard set of cleaning accessories (6-9 subjects), the company offer up to 20 additional, suitable for all occasions, for example, for cleaning radiators.
For animal care nozzles produce a variety of replaceable lining
The models of the Activa series (SISTEM-AIR) controls the microprocessor
Replacing the mobile vacuum cleaners built-in is the new trend of the life of a modern person in our country. This article is devoted to the problem of choosing and the peculiarities of the application of such equipment in the conditions of home and apartments.
Nowadays, many are aware that the concept of "quality of life" includes primarily the conditions for healthy life. According to the World Health Organization, 48% of the population of the Earth suffers from allergic diseases. Awesome and the pace of their distribution, and the fact that the disease "the youngest" is literally in front of her eyes. The reason is obvious: the air in housing is 4-6 times dirtier and 8-10 times toxic than street. Dust from the street plus furniture wear and clothing products, spores of mold fungi, dust tick products create such a malicious "cocktail" that our immune system involuntarily gives failures.
How to help her? The solution to the problem has long been found, it is regularly removing from the premises of all air pollutants and dust by a highly efficient vacuum cleaner. Best of all, the embedded (stationary) vacuum cleaners are best done with this task, and rather autonomous dust offering systems.
Fundamentals of the question
The main part of them is a force block (SB) with a vacuum pump removing air from the room, is mounted stationary outside the residential area of the apartment (at home), for example, in the pantry, bathroom, on the balcony, in the basement, technical room. The network of plastic pipelines mounted is usually hidden in the floor, walls of walls, behind a tail ceiling, connects SB with pneumatic valves (pneummators and air) installed at different points of the apartment. Pneumoshovok serves to express garbage in the most contaminated zones - in the hallway, kitchen, by the fireplace. To start cleaning, you need to insert a cleaning hose with a nozzle into the pneummatory and turn on SB. Dust and litter pipes are sucked in the cleaning sector in the CAT Corps, from where they fall into the dust collector, which is enough to free from the accumulated garbage every 3-4 months. The purified air from the Sat on the discharge pipe is thrown out of the housing, more often to the street or to the ventilation dialing channel (depending on the location of the Sat). This principle employs all embedded dust systems. They cost an average of about 75 thousand rubles. For apartment and 150 thousand rubles - for a country house. However, for small apartments (area to 60m2), the turnkey system is offered for 20-25 thousand rubles. "This is the Vacuflo FC and Astrovac brand models, KronEMark (Russia-Germany).
It is very practical to have such a system in the country house: only it will provide the highest quality and cleaning speed. Valitary high-rise buildings The dusty system is often provided in the project as a general one. There are no unlikely new buildings of them, and the installation of the apartment system is not yet ubiquitous, but quickly acquiring popularity, and there is an increase in demand for budget options. This is not by chance, because the system has a number of undeniable advantages over mobile vacuum cleaners.
You can mount the system both during repair and construction work and in the already completed interiors: pipes are hiding in the box or pave instead of a plinth. The latter circumstance makes the systems attractive to many people: the hassle associated with the installation is not enough, and the financial costs are quite acceptable. The market of such systems is very dynamic. It continues to lead one of its Vacuflo brand pioneers. Beam Electrolux (Sweden), BVC Mit Siemens Motor, Rehau, Thomas (All Germany), Disan (Italy), Husky (Canada), Kronemark, AERTECNICA and SISTEM-AIR (MANUFACTURING), SILENTMASTER (MD Manufacturing , USA), Puzer (Finland). She declared Nilfisk (Germany). Collect the Russian DrainVac and Duovac market (Oba Canada). Three newcomers appeared: these are Vacu-Maid brands, Astrovac (Lindsay Manufacturing, USA), Enke (Enke Srl, Italy). The number of household models offered in the market has exceeded 100. Note some landmarks to choose among them.
Stages of hidden installation of a dusting system in a country house
2. On the ends of the pipes carefully remove the chamfers;
3. Pipeline networks are collected using adhesive connections;
4. When the mounting of the oath frame of the hole in it is closed with a technological lid, so that the construction solution does not come inside the pipes;
5. Suggestion nodes with pneummatory groups;
6. Monster pneummators;
7. Connect the pneumatic pipes to the pipeline;
8. Mounted pipeline under the overlap;
9.-Check the tightness of the network by a vacuummeter
| 
| 
|
| 
| 
|
| 
| 
|
Tornado hat
For reliable operation of a stationary vacuum cleaner, two main tasks should be solved: organize a hermetic network of pipelines and create enough air loss (vacuum) in it, thanks to which the air is suused through the cleaning nozzle, like a tornado, easily captures garbage and dust from any surfaces. The vacuum creates a vacuum pump from a centrifugal type turbine and an electric drive. Turbines are designing high-speed- 20-30 thousand rpm, and some models, such as BVC Mit Siemens Motor, up to 48 thousand rpm. Thus, high pumping speed is ensured (180-270m3 / h), and in addition, the dust on the turbine blades does not accumulate and the dimensions of the node can be reduced.However, high turbine turnover generate air noise, and dust particles poured on the blades cause the rotor imbalance and, as a result, the engine vibration. The firms decide these problems in different ways: here and careful study of the geometry of air channels, and the engine vibration suspension, and noise insulation of the engine compartment, and silencers on the exhaust pipe. Best aggregates noise does not exceed 52-55db, which meets the requirements for sound insulation in elite homes: the neighbors will not hear it. Leadership challenges the S1 models (SILENTMASTER) - 46DB, Q-Whisper (Husky) - 50DB, BVC MIT Siemens Motor- 52DB and ENKE-53DB aggregates (though, these data are obtained by different methods).
Node pumping - heart system. It was created by a lot of firms. Ametek Lamp Electric (USA) turbines of the vacuum cleaners are affordable. Only Husky, Nilfisk and Thomas produce their engines. All domestic models are collector-type engines, because the turbine needs large revs. Companies guarantee that the resource of the brushes on them is 400-2000h (for example, Vacuflo). This is quite enough for 8-30 years of engine operation (1 h cleaning per week).
According to cooling methods, the engines are divided into two groups: direct-flow and water-based (bypass). The first group engines are cooled by the flow of the air removed. In the second-ejected air on the bypass pipe, the engine is boring, and it is cooled with air from the space surrounding Sat, with the help of a special small fan. Engines both groups work well in different conditions. However, a number of firms (BVC Mit Siemens Motor, Sistem-Air, Thomas) use only "direct eroders". Some companies using both types of engines put direct-flow to less powerful and cheaper models: Q-compact (Husky, 16,200 rub.), S-650 (Astrovac, from 9800 rub.), Eureka (Beam Electrolux, 7500rub.). It should be borne in mind that the built-in vacuum cleaners are intended only for dry cleaning. To cope with spilled liquids, construction trash, ash fireplaces, companies offer an additional option, the so-called separators (from 3 thousand rubles). Externally, they look like a tank connected by flexible hoses with a pneumuth and harvesting rod. Work as garbage collectors, not allowing sticky dust to get to the main turbine.
Weight "Tornado"
To better understand the logic of selecting the system, consider more parameters of the Sat and their connection with the properties of the pipeline network. It turns out that pumping air from the pipes, the turbine is capable of creating some limit to it (it does not grow, no matter how long we pump out, since the pumping air penetrates back into the pipeline through the gaps in the turbine design). This vacuum is constantly throughout the network of pipelines. But as soon as we open the outlet, the room air immediately rushes and rushes along the pipes in Sat. However, the pouring length of the pipe changes: it remains the limit at the entrance to the turbine and decreases at the outlet. The longer the pipe and more different resistance to the air flow (pipe roughness, its bends, articulation with fittings, narrowing and expanding the diameters of the IDR), the greater this fall and less suction force on the harvesting nozzle. The conclusion is obvious: it is not enough to choose a powerful aggregate- it is necessary to correctly build a network of pipelines. That is why, with all the seeming simplicity of the design of the harvesting system, it should design it, and not users. Auto Calculated and equipped sets for simple systems The buyer can collect on their own. For example, BVC Mit Siemens Motor, Thomas, Vacuflo for this installation offer detailed instructions.
Tips for experience
1. The built-in vacuum cleaner cannot be used to clean the construction trash. The smallest particles of cement, asbestos, gypsum stick on the turbine blades, which causes severe vibration, and the service life of the device is reduced.
2. Do not install pneummators above 50cm from the floor: the place of the hose and fitting is excessively loaded.
3. When laying pipes in the apartment of stages under them (7070 mm) cannot be done in the bearing walls and plates of overlaps.
4. Many of the accessories you like you can buy in other firms: elements of systems are partially interchangeable.
5. At the end of the cleaning, give the system to work 5-10 with a frightened so that the garbage flies to the garbage collector and the pipes are cleaned.
What is a powerful aggregate and how to choose its power? To answer this question, experts take into account air loss in the stream and its speed. Ito and the other breeds the pulse of the force acting on the stationary of the dust or pebble on the floor. It is established that the brush is enough to have a vacuum of about 8-10 kPa (at the mobile vacuum cleaner, about 5 kPa). If these values add permission loss when air moved (it depends on the design of the pipeline), it will be necessary for the necessary permission from the turbine. It will ever with its range - 17-28 kPa.
To facilitate the buyer a choice, manufacturers have been gradually 2-3 years old to a single compact power. This is theoretical parameter, its value is equal to the product of the vacuum and the speed of the air in the working opening of the turbine (the data of the magnitude determines the manufacturer). A units of measurement of the parameter often apply aeriality (AEROV). It allows you to rather clearly (see table) to evaluate cost efficiency. It should be understood that one parameter (even with a large value) does not guarantee high cleaning efficiency. The resistance of the system pipelines is also very important. It depends on the length and diameter of the direct portions of pipes, the number and design of fittings (each resistance fitting is equivalent to a straight pipe of a certain length), the location of the power unit vertically relative to the main pipeline, the length and configuration of the exhaust pipeline.
Some buyers involuntarily look at models with excess suction power. But we want to warn you that in this case, in addition to the greater value of the unit and the payment of extra kilowatt-clock, the brush will be very sacrificed to the floor and with difficulty moving, and the pile materials will be faster. All manufacturers offer excess suction force, opening a special hole on the harvesting rod. The brush really becomes easier to manipulate, but the engine does not stop "eats" additional watts.
Aaertecnica, BVC Mit Siemens Motor in its models change the speed of the engine using a potentiometer placed on the rod handle, actually saving electricity. So before purchasing a too powerful unit, it is better to consult with specialists and buy a vacuum cleaner with an optimal power for your home.
Reliable cage
Creating a network of pipelines begins with determining the number and places of installation of pneummators. The logic of their search is simple: the shorter the hose is the easier it to work with it, but you will need a greater number of outlets. One outlet is enough for cleaning area 30-60m2. "Excess" socket will cost 5-6 thousand rubles. (with work).Choosing a good room for a collection problem of the system installation. It all depends on the specific conditions. The limitation is perhaps one thing: from the Sat to the point of installation of the exhaust valve, the pipe length is limited (5-9m- specify the model). If the positions of sockets and Sat found, the specialists of the company will clarify the features of the track between them, they will conduct an aerodynamic calculation and prompt which models are successfully "pumping" pipeline.
Well, what pipes are used for the network? It should be noted that in the USA and Canada they are produced in an inch system, and in Europe - in the metric, therefore pipes and fittings are not interchangeable. Diameters - 42-63mm. Materials of elements of pipelines - PVC, ABS and polypropylene. For systems, under-quality pipes are needed, with precise size and small roughness (in particular, PVC elements are produced with antistatic additives so that the dust does not stick to their walls). Attempts to apply cheaper pipes for sewage to good do not lead: the system loses the suction power. Pipes can be deposited or installed on the clamps outside the walls. Many companies use the installation of pipes and adhesive fittings. Apuzair (Finland), Rehau, Thomas use pipes and fittings with a fuse-free joint and a sealing ring.
Clean the stream
Removed air should be purified from dust in accordance with the requirements of ecology and sanitation, although we have no special rules for this. Among the filtration technologies, the cyclonic method of air purification is a special place. The cyclonic Cyclonic Cleaning air purification method implemented in the design of VACUFLO units is occupied. Its principle in one form or another use most firms. It is as follows: the air is supplied to the cleaning chamber on a tangent of the cylindrical wall so that the flow spirals on the helix like air in a tornado column. At the same time, particles of dust by centrifugal forces are discarded to the walls of the chamber and under the action of their weight settle down down - in the dust collector. The purified air is assembled in the central zone of the chamber and is thrown over the bypass channel from the SAT Case into the Street. This is the easiest and sureless cleaning method, the performance of which does not change with time. It is only necessary to ensure that the dust collector is filled with more than 3/4 from its volume.
It should be borne in mind that a small part is 2-4% of the total dust (one that is smaller than 3 microns) - not captured and thrown into the street. Living in a country house, you will not even notice. In addition, clean the protective grid before the turbine from large garbage (wool, pieces of the IDR film) is not too convenient (it has to be done actually to the touch) and nonhygienically (garbage rushes in hand). True, there is a proposal that allows you to increase the comfort of this cleaning. So, in Vacu-Maid vacuum cleaners, where the "cyclone" works in the separator, the protective grid functions as a passive electrostatic filter and is placed on the filtration chamber, so access to it is simple through the top cover.
The Air Channel device in the VACU-MAID devices balances the pressure above the plastic bag in the garbage collection and under it, not allowing it to be drawn into the filtering section when working
| 
|
|
Extra filters often come to the help of "cyclone". This can be a non-removable self-cleaning membrane from a nonwoven material, which is mounted above the Cyclone Chamber. When working, it is revealed as an umbrella, when it is turned off, it falls down, shaking dust. This scheme is valid in a number of Beam Electrolux models, BVC Mit Siemens Motor, Husky. Wastrovac such a filter delays 97% of the smallest dust particles (up to 0.3 microns) and has a non-stick coating (SURF-TEX technology). It is designed for the entire service life of the vacuum cleaner. However, replaceable cartridges with a developed surface of filtration ("accordions") are considered more efficient assistants. Some of them need to be washed after 3-6 months, others change after 1 year (depending on the material of the cartridge). The circuit "Cyclone" + cartridge "uses most companies, including the Cyclone Creator - Vacuflo (FC Series). Materials, Working area of the surface of the cartridges, their fasteners are different. Innovative solutions can be noted automatic cartridge self-cleaning by shaking At the model hta.i.plus a (enke).
Filtering technology is not forgotten using interchangeable tissue or paper bags working independently or paired with a cartridge without a "cyclone". It is used in small models Astrovac, Beam Electrolux, Enke, Husky, Kronemark, Nilfisk, Puzer. This reduces the cost of Sat to 8-17 thousand rubles.
Tpares with filters work garbages, which are usually made in the form of a tank attached from below to the filtering section. Their volume ranges from 12l (SC300, Beam Electrolux) to 55l (SilentMaster). A fundamentally different solution was applied in the SilentMaster and Astrovac- "inverted" layout, in which the engine with the turbine is located at the bottom of the housing, and the garbage collector. This not only makes it easy to pull out the garbage bag up, but also provides additional sound insulation of the engine compartment.
Wider circle!
One of the directions of development of the concept of embedded vacuum cleaner is expanding the scope of the application. Here you can select three atypical solutions.
1. Connection of mobile and built-in vacuum cleaners. Models that have a power unit can be treated on wheels like mobile, in those places where it is difficult or expensive to stretch the network, or hang on the wall and combine with a network of vacuum wires, offered Thomas (ZA-450) and Nilfisk (CENTIX 60) .
2. Applying the layout of professional systems in household aggregates. So far, only Vacu-Maid suggested a "split-system" of cleaning (manufacturer name). Price, from 55 900 rub. The filter block (separator) is separated from the engine and is embedded in the network of vacuum wires stationary. Since it is not noise, it can be placed in any convenient place (even in the bedroom), while it provides better filtering compared to monoblock systems. For a country house, the system is suitable as it is impossible.
3. Built-in vacuum cleaners for wet cleaning. Husky offers them (models PT 3611, PT 3211). This firm and system for wet cleaning (based on the AA series units, the price is from 82 thousand rubles). They are fed to the purified place water (from the water pipeline) and the detergent solution (from the bottle), then clean, collect moisture and dried the surface, and all the dirt is thrown into the sewer. However, it is necessary to wash the pipeline network after each cleaning, so as not to turn it into the bacteria seedler.
Do not forget to clean the garbage collector in time, because the lower the mountain of garbage in it, the less filters are clogged, which means that the power of suction is not weakened. In order for the tank when emptying the tank, the user did not choke in the dust clubs, they offer to take into arms two concepts. According to one, the dust is assembled into filter bags that are emitted (usually after 2-4 months) after filling them. But bags make it difficult to absorb air. Therefore, the Multilayered Protection Filter Package from a special nonwoven material that minimizes the power loss is used in ENKE aggregates. On the other, the dust enters the plastic bag inserted into the garbage collector (for example, in the BVC Mit Siemens Motor, AERTECNICA, DISAN, SISTEM-AIR, THOMAS). During operation, air flow seeks to draw it inside the unit, reducing the useful volume of the garbage collector. Blocks with cyclone filtering such a phenomenon is most noticeable, so the VACU-MAID models use a special AIR CHANNEL technology, eliminating the package pulling.
| Pneummakers collects large garbage, looks like a narrow slit (10.11), covered with a lid (12), and does not need a hose | ||
Vacuflo. | 
Vacuflo. | 
Vacu-Maid. |
System management
Power blocks are constantly connected to a 220V voltage network, and include them with one of two ways: using a wired or wireless control system. For the first case, the control cable, connecting the pneummatory and pneumatic, with SB (voltage 12 or 24V) next to the pipes. The sockets play the role of the switch. Sat turns on when connected to the outlet of the tip of the harvesting hose or from the switch on the hose handle. For the first version, the hose has no built-in wire, so it is cheaper and easy to repair it, but it is less convenient to work with it, since when you turn on, you need to follow the nozzle so that it does not sleep something needed. In the second, it's the opposite: a hose with a built-in wire, it is more expensive and is not repaired, but it is easier to work with it. Wireless remote radio management method at 434 MHz offer REHAU, THOMAS, VACU-MAID. It is more acquitted at random networks and rather from the point of view of reliability than economics: it is difficult to find damage in numerous wires, and the system is not suiced (radio, from 7 thousand rubles, intermediate amplifier - from 9 thousand rubles). If you want the design of your interior to be made in one style, you can pick up pneummators that match the electrical products of ABB companies (Germany), Legrand (France), Gewiss, Vimar (Obaitaly). Please note BVC Mit Siemens Motor, AERTECNICA, DISAN, SISTEM-AIR, ENKE products. By the way, it should be noted the sockets with the castle (Disan, Thomas), which do not allow children to turn the pipeline into the object of their games.
To improve the appearance of the case of power blocks, a stainless steel with a color powder coating is used (13- VACU-MAID); Plastics and polished aluminum (14- Husky) or polished stainless steel (15- THOMAS)
Vacu-Maid. | 
Husky. | 
Thomas. |
Units for typical houses
About the needs of millions of potential buyers living in small apartments, manufacturers do not forget. True, the list of suitable models is small. The main features of such devices: Compact sizes (height up to 600 mm and diameter up to 360mm, so that it is easier to hide the unit into furniture), noise level up to 65DB, moderate volume of the dust collector (about 15l), attractive design, budget level price. The most suitable for "small-sized" up to 60m2 can be recognized by the Puzer models (they are the smallest, and the network is made from pipes with a diameter of 42mm). Among the leaders of "Mallomok" is the EUREKA CV140 model (370170mm, Beam Electrolux), EEVA (460330220mm, Puzer). You can also pay attention to the S80 model (AERTECNICA), ZSA 18/1 (DISAN), Q-Compact (Husky), Classic S10 (KronEmark), CENTIX 20 (Nilfisk), FC 310 (Vacuflo), Sunny Small and Mini (Sistem -Air), S 650 (VACU-MAID). Special mention deserves a Jolly (Sistem-Air) new concept that appeared a year ago. It does not require a network of vacuum wires, its Sat is placed on the outer wall inside the apartment. The harvest hose is connected directly to the Sat, the exhaust pipe passes through the wall. The model takes a minimum of space (438316175mm) and is suitable for one-bedroom apartments.Advantages of built-in vacuum cleaners
1. Removal from the room to 94-96% allergens. This allows you to create healthy conditions for residence of people prone to allergies.
2. Improving the quality of cleaning (the cloud of dust from the jet of air blowing the vacuum cleaner) is not formed.
3. Easy and simplicity of cleaning. Move accounts for only a light hose with a brush. A large suction force allows one place 1-2 times, and not 4-5, as a conventional device. Cleaning performance reaches 100m2 / h on carpet coatings, and it does not decrease during work. The vacuum cleaner does not scratch furniture.
4. Small noise discomfort. The power units themselves are less noisy (on average 60-70DB), and most importantly, they are removed from the room. Vitoga Noise load does not exceed the sound background (in any case, the conversation on the phone does not swap).
5. Electricity consumption is less than that of mobile vacuum cleaners (due to greater suction power and high cleaning performance).
From theory to practice
We want to show that equipping the apartment with a dust system system - the task of the settlement for many of our fellow citizens. It is not difficult to implement it will not be difficult for our readers who carefully studied this article. So, briefly about the details. Two-bedroom apartment with a total area of 60m2, carpets, drapery, and two more dogs. Older inhabitants do not want to part with anything. A lot of dust, allergy pins, so the built-in system of dusting for them is just a find (many families may face with such a problem, including young, with children). Promers have shown that from one pneummatory, using a 8m hose length, you can reach all corners of the apartment. A glazed cold balcony was chosen to install the power unit. Since there are a lot of wool from dogs, we decided not to save on the suction capacity and take the model by the "cyclone", but it is desirable with a self-cleaning filter so that the aggregate aggregate grille should not be cleaned. Noise- no more than 60 dB. The system should not be very expensive. Vitoga chose one of the VACU-MAID models. Representatives of the company came 3 times: to carry out measurements, mount the system, check the operation of the unit and bring the gloss (put the wallpaper, install plinths). Installation led in the conditions of the "live" interior. Everyone was done for 6 hours, and 2h 2h went to clean the room. On another day, the walls of the wall were covered with wallpaper, put missing pieces of the plinth, the pipe was saved by self-adhesive film. Checked again, everything worked fine.
Open installation of built-in vacuum cleaner in a small apartment
1. The furniture from the wall furniture;
2. The outer wall was drilled a hole overlooking the balcony;
3. In the partition, the hole for pneummators was cut out and the stroke and inserted a pre-assembled outlet assembly into the hole;
4.5.This told the highway to the balcony;
6. On the outer wall fastened the bracket;
7.The main block;
8.k, they led the suction pipe;
9. Mounted the exhaust pipe with the exhaust damper;
10. Filled electrical connections and checked the tightness of the network. The gaps in the wall were blown, the socket assembly was deposited by quick-drying composition
| 
| 
|
| 
| 
|
| 
| 
|
| 
|
| Mark. | Model | Cleaning area, m2 | Power consumption, kW | Airflow, m3 / h | Village, kpa | Power suction, Aerovt | Filtration system | Price of the power unit, rub. | Specific suction costs, rub. / Aerovt |
|---|---|---|---|---|---|---|---|---|---|
| AERTECNICA. | C80 | Up to 200. | 1,46. | 195. | 24.5 | 436. | "Cyclone" + cartridge washable | 26 800. | 61,4. |
| Astrovac | S-650. | Until 185. | 1.5 | 61,1 | 24. | 517. | Non-woven bag | 9800. | 18.9 |
| Beam electrolux | Mindo 185. | Up to 200. | 1,2 | 211. | 28. | 442. | "Cyclone" + self-cleaning membrane | 30 thousand | 67.8 |
| BVC Mit Siemens Motor | Compact 600. | Up to 400. | 1,8. | 236. | eight | 680. | "Cyclone" + permanent filter | 49 052. | 72,14 |
| Disan. | ZSA 25/1. | Up to 200. | 1.25 | 191. | 27. | 341. | "Cyclone" + cartridge washable | 29 900. | 87.6 |
| Enke. | HTA. | Up to 500. | 1.9 | 260. | thirty | 685. | Cartridge washable + bag (5 layers) | 26 240. | 38.3. |
| Husky. | Q Air. | Up to 350. | 1.75 | 170. | 28. | 490. | "Cyclone" + self-cleaning membrane | 29 300. | 59,7 |
| Kronemark. | S30. | Up to 250. | 1,7 | 159. | 34. | 452. | Fabric + paper bag | 23 800. | 52,6 |
| Nilfisk. | CENTIX 50. | Up to 400. | 1,7 | 198. | 25. | There is no data | Fabric bag | 21,900 | There is no data |
| Puzer | Oiva. | Up to 600. | 1,7 | 247. | 25. | 623. | Non-woven bag | 44 600. | 71,4. |
| Rehau. | Vacuclean 2000. | Up to 400. | 1,35 | 220. | 28. | 530. | "Cyclone" + cartridge | 37 950. | 71.6 |
| SilentMaster | S1. | Up to 200. | 1,1 | 162. | 24. | 346. | Fabric + bag | 29 400. | 84.9 |
| Sistem-Air. | Activa Mini. | Up to 200. | 1,4. | 196. | 27. | 520. | "Cyclone" + cartridge washable | 40 463. | 77,81 |
| Thomas. | 15-300 ZA. | Up to 450. | 1.5 | 248. | 29,2 | 540. | "Cyclone" + cartridge | 48 600. | 89.9 |
| Vacuflo. | FC 570. | Up to 400. | 1,18 | 187. | 30.7 | 520. | "Cyclone" + cartridge | 25 800. | 45.2. |
| Vacu-Maid. | SR-11. | Up to 250. | 1.5 | 219. | 24. | 488. | "Cyclone" + self-cleaning membrane | 29 900. | 61,3. |
The editors thanks the company "Growth", the company "ECUHAUS", "EKODOM", "Russian West", "Vivatex-M", "Blizzard Lufttehnik", Telecom TS, representative offices of Vacu-Maid, Husky, Thomas for help in Preparation of material.