Teapots on the current

Overview of the electric kettle market: structural features, comparative characteristics of some models, causes damage to devices.

Architects

A. Vlasov,

O. Lusenkova

Photo by D. Minkin

Buying an electric kettle, evaluate not only its appearance, but also the convenience of construction. So, the wide neck simplifies the process of filling water, especially if it is used as its "source", but, for example, canisters and similar containers

Instrument handles made of plastic, weakly heat

Architect

P. Fedorov

Photo D. Schiglovsky

Now produce electric kettle with metal housings. Such devices look good in modern kitchen.

Corps of CVB models 2420, KVC 3030 (DELONGHI) have traditional outlines familiar to users. Nevertheless, the "filling" of these electric kettles is the most modern

A lot of modern teapot models, for example SJ 377 (Kenwood) (a),

HD 4680 (b),

HD 4681 (B) (Philips), equipped with a hidden heating element, mounted in the bottom. Such a design simplifies the process of cleaning the flask, reduces noise, allows you to boil small portions of water

Siemens.

To simplify the storage of technology, the cord of the kettle can be removed in the compartment

Architect

V. Khairutdinova

Photo by E. Kulibaba

Many electric kettles are equipped with sufficiently short wires (length is about 80cm). Manufacturers do this for security reasons - the shortest wire, the harder it is randomly cling to it during the vestment in the kitchen

Bork.

Stands of many modern teapot models are equipped with a so-called central contact, providing a turn on 360. It simplifies the operation of the device, as the kettle can be installed on the stand in any position convenient for the hosts. If necessary, the teapot in one movement of the hand is unfolding in the most preferred angle to observe its work. It is also easy to remove the kettle with the stand

The inclusion button at the model TW 911 P2 (Siemens) is equipped with an elegant ring light-rifle, which makes it easier to manipulate the device.

Architect

I. Uryvayeva

Photo by E. Kulibaba

The rapid pace of life dictates its conditions, teapots, as a rule, differ in high power (2-2.4 kW), allowing you to boil 1 liter of water for about 3 minutes

Choosing a kettle, do not forget to ask what the design indicator design. Honeymium, LED indication is well distinguishable far from all models

Philips.

The design of the kettle spout is very important for accurate and neat fluid spills. Modern models in this plan are distinguished by high ergonomic

Architect

M. Frolova

Photo by E. Kulibaba

The TW 911 P2 kettle (Siemens) enters the collection of devices for breakfast Siemens Porsche Design-2. All items from the collection are decorated in a single style.

In the model WK980 (Kenwood) there is a replaceable cartridge filter for water purification

Architect

S. Tev.

Photo M. Stepanova

To connect the teapots, it is not necessary to use extension cords - it is better to provide in advance to install sockets over the kitchen countertop. At the same time, sockets must be located at a sufficient distance from water.

Architects

T. Chelyapina,

V. Kuzmin

Photo by E. Lichina

The bottom of the teapot stand must be made of non-slip material.

Various body designs and pen. "Traditional" kettle (a) is convenient for transfer, but it is difficult to pour water out of it. Models with a high and narrow housing (b), as well as with the inclined arrangement of the handle (B) from the point of view of ergonomics are most convenient to operate, as the hand is less loaded. A teapot with a wide housing and a side arrangement of the handle (g) is not easy to hold on weight

Many of us it seems that electrochetics - devices according to the design of their simple, almost primitive. In general, the kettle and there is a kettle ... What will you take from him? However, there is enough escort acquaintance with this technique to understand: the situation is not at all.

We put the kettle on the alcohol in the bow of the boat and retired to the stern, pretending

What we do not pay attention to it and are concerned about completely different affairs.

This is the only way to make the kettle boil. If only he notes that you

We are impatiently waiting for him to boil, it will not even think to get cheaper.

Jerome K. Jerome.

Three in the boat (not counting the dogs)

A couple of decades ago, electric kettles presented in the Russian market could not boast of pleasant appearance or any additional features. The classic electric kettle appeared little from its usual fellows: a metal housing with a folding handle, a removable cover, curved, like a swan neck, nose ... The only feature was a wire with which the device was connected to the power grid. The design was ambiguous and inconvenience: massive Ten occupied a pretty fraction of the kettle volume, the wire (which was often made non-removable) made any manipulations with the device, including its washing and cleaning. Therefore, electric ketties were used only where gas or electric plates were absent.

Years, the manufacturers gradually improved the "best friend of all waters". Over time, these innovations led to the fact that the electric fuel turned into a comfortable and stylish device. I scattered so practical that many Russians are happy to enjoy them at home. Moreover, by the number of copies sold, this type of product is a unconditional leader among all the kitchen appliances, which is not surprising. After all, on the one hand, the number of tea lovers in our country far exceeds the number of fans of hot bread (toasts) or heated sandwiches, and from the other age of an electric kettle, even if the very good and reliable, alas, the underwent (why is it the case Further).

Today we will consider the most interesting, in our opinion, the models of electric kettles of the middle and highest price categories from the most famous world manufacturers. The platform is presented by Bork, Bosch, Krups, Rowenta, Siemens, Kenwood, Siemens, Philips (Netherlands), Panasonic (Japan), Ufesa (Spain), Moulinex, Tefal (France).

How to avoid breakdowns

Why are electric teapots break? High wear rate of these devices is determined primarily intensive operation. Many of our fellow citizens, if you drink tea, then several times a day: in the morning, in the afternoon, in the evening. Therefore, it makes sense to buy equipment, given the number of potential participants in tea party. If a person lives alone, then the kettle will need a small, less than 1l. Adlya Big Family need another instance-specific, like a samovar, so that no one seemed to anyone. There are models with a capacity of 4-5l. If, instead of a 5-liter, take a teapot by 0.5 liters and boil it 10 times in a row, it is unlikely to last long. In addition, large kettles better "hold" heat due to the high heat accumulating properties of water and cool slowly. For lovers of prolonged tea drinking, you can recommend kettles-thermoses (thermopots). These devices retain steep boiling water within a few hours, and if they connect them to the power supply, an unlimited amount of time. To maintain water in the hot state, they spend quite a bit of electricity - 20-50Wh.

Another reason for the breakdown is the presence of calcium and magnesium ions in the water (stiffery salts), which appears on the heating elements. It is possible to reduce the speed of its education in several ways. For example, use water, cleaned using special filters, or choose a teapot with a heating element of a special design, to which the scale is sticking slower. Best of all, of course, abandon crude water water. Let's say in Europe to anyone and in the head will not come to use it without filters. Amnogie Europeans prefer to buy bottled drinking water, which contains a strictly dosage amount of mineral salts necessary for the body.

10 indicators affecting the choice

The future owner of the kettle, in addition to the capacity of the vessel for heating the water (flasks), other important indicators should also be taken into account.

1. Power consumption. This indicator is important for "happy" owners of outdated, wind wiring. It is not designed to connect devices with a total power consumption of more than 2.5 kW. It will require, the owners need to remember that among modern teapots, very powerful models come across 2-2.4 kW. When turned on (especially simultaneously with other devices), they are able to create an unacceptable high load on the electricity. A results may be disconnected by electricity and even wiring. Therefore, the owners of the "Old Testament" power grids can be recommended to identify teapots of less power to 1.5 kW.

2. Water heating rate. Many mistakenly believe that it depends solely on the power of the electrical appliance. This is not quite so. The heating rate is also determined by the design of the heating element and the housing. If the time interval that was required by the teapot of about 2 kW for heating 1l water, does not exceed 3min, this is considered a good indicator. For models presented in the article, we conducted test trials.

3. Noise of technology. This parameter also indirectly depends on the power (than the device is more powerful, the "noise"), and by the design of the housing and the heating element.

4. Kaplesball. The spout of the kettle, through which the boiling water is spilled is a very important item. With the correct design on its outer surface, there are no running droplets, and the kettle looks neat.

5. Heating element. The latter can be made in the form of an open-ended or flat plate, mounted in the bottom. Teapots with a flat heating element are more expensive, but easier to operate: they are easier to clean, in addition, they can be heated even a small amount of water.

6. Stand. Today, most models are equipped with a stand with the central contact of the STRIX system. It provides a slight connection of the kettle and the possibility of its turn on the stand around its axis to 360. This design is much more convenient to the stand with a rigid connection (not to mention models without a stand).

7. Pen. The handle must be "grasp". It is possible to estimate its convenience, only Holding the kettle (preferably with water) on the weight. Therefore, it is better to touch once than to see a hundred times: do not hesitate to take the kettle in the store. There are two different structural types of pens: located on top above the lid or side of the case. Both have their advantages and disadvantages. The top handle makes it easy to carry the kettle, but it makes it difficult to open the lid, and it is more difficult with her to gently pour boiling water, more chances to scream. The handle on the side simplifies the spill boiling water, but keep a full teapot on weight with its help is harder.

8. Cover. The cover should be opened so as to eliminate the possibility of random scalding (for example, if it was necessary to add water into a heated kettle). It is best if the lid is equipped with a block and a special mechanism and opens when you press the button.

9. Case material. Stainless steel - material not only beautiful, but also wear-resistant. However, like every metal, the stainless steel is heated by the kettle. Plastic models in this regard are safer, but losing metal in appearance. In the early time, combined housings appeared. They are made of plastic, but with overlays (most often aluminum), giving the kettle an attractive look. Decorative lining can be removable. There are also kettles with a glass flask. Glass-"noble" and very wear-resistant material, it is easy to remove contamination from it. But such kettles are distinguished by fragility and relatively high price.

10. Price. Today, you can find electric ketts worth 400-500 to 2-3 thousand rubles. Cashev belongs to the models with a plastic case, a stand without a central contact, open by Tan and the minimum number of additional features. Dear teapots are equipped with a stand with a central contact and a flat heater.

KE CRN 3317 BK (Bork).

Bork is a model with polished stainless steel housing. The base, the lid and the handle are made of eating black plastic. Power - 2 kW, capacity - 1.7l. The compartment includes removable plastic filters. The body in shape resembles a jug. The handle is very comfortable, it makes it easy to keep the teapot on the weight. When testing on the speed of boiling water, the kettle showed a very good result: he boiled 1l for 2 minutes 58 s. Price model - 900 rub.

Summary. Easy and efficient design. The groke is not many useful options, such as automatic shutdown when boiling, lift lift or water level indicator. Such "simplicity" is the main disadvantage of the model. The metal case looks beautiful, but heats up greatly when working. The advantages can be considered fast water heating and the thoughtful design of a flat heating element that is easy to clean.

Evaluation "IVD": design- 4, functionality- 3, ergonomics - 4.

KE CRN 9917 BK (Bork).

BORK The kettle housing with a capacity of 1.7 l is made of matte stainless steel. Model with central wireless connection and hidden heating element. The handle is made of rubberized plastic. The libting system is provided (the lid opens smoothly when you press the button) and the sound indication of the end of heating. The lid is equipped with a window that allows you to look inside the kettle, without opening it. The device is characterized by a high power - 2.4 kW. However, when testing the booster speed, its result: 1 l. 3min 1 s. When spilling boiling water, the kettle spacing remained dry. Price model - 2.7 thousand rubles.

Summary. The kettle is attractive externally and easy to operate. The cover opens with the help button, which practically eliminates the opportunity to accidentally scream. The only thing you can find fault in the design is the location of the water level scale directly by the handle, where it is not so clearly visible.

Evaluation "IVD": design- 5, functionality- 5, ergonomics - 4.

NC-EM40P (Panasonic).

The only teapot-thermopot in our review. The housing of white plastic is equipped with a water level indicator (front), four control buttons (top) and a movable handle for carrying. Spilled water is offered using the control button. The device has an extremely spacious water tank (volume - 4l). I was pleased with the power cable with a length of as much as 1.4m, which can be disseminated. The device is economical (consumes no more than 0.7 kW), and therefore it works almost silently. True, the low level of energy consumption is reflected at the booster speed of water: to boil 1l, the thermopotume required 7min 50 s, and the required time for boiling all the volume (4l), according to the instructions, is 35 minutes. Price model - 2.3 thousand rubles.

Summary. An interesting and unusual device. It is worth noting their additional opportunities. This is, first, the mode of maintaining water hot. Boiling water for a long time (up to 6h) remains steep, and electricity is spent quite a bit - 25-51 bill. Secondly, it is possible to choose one of the three temperature modes: 60C- for heating baby food; 85c- for brewing of Japanese tea; 98S- for coffee, tea and noodles. The timer is also provided for 6h and the function of long-term boiling water to reduce chlorine content. The case in the process of work is weakly heated. The main minus device is too slow. Therefore, for a hurried morning breakfast, it is not suitable. But for measured tea drinking suitable as it is impossible.

Evaluation "IVD": design- 3, functionality- 5, ergonomics - 4.

ADPA LIRYS (Moulinex).

The kettle is distinguished by a fairly large capacity (1.9l) and high power (2.4 kW). The length of the cord is 0.8m, there is a compartment for its storage (in a stand with a central contact, providing rotation by 360). Plastic housing is available in several colors: white, blue, light green. In the middle part it is equipped with an insert from transparent plastic, through which it is possible to visually assess the water level, observe its boiling. Also on both sides on the housing there is a graded water level scale. In the form of the body resembles a bowl for a punch with a wide neck. The device is equipped with a remote opening button of the lid, which is located so as to minimize the risk by chance to burn hot steam. Heating time 1l water was 3 minutes 2 s. The design of the spout was quite successful, after the spill of boiling water there was only one drop. Price model - 1150rub.

Summary. The design of the case cannot be called impeccable, although, according to many owners, it looks quite modern. However, the main advantage of the model is not in this. Ergonomics vision of ergonomics The kettle is made almost exemplary. A wide neck simplifies the process of filling the tank. Plastic housing heats out weakly. Transparent insert helps to control the amount of water. The opening button of the lid is located on the handle, which does not allow the owner of the kettle to scream. Especially I would like to note the original design of the electric fork: it is equipped with a wide eyelet, which makes it possible to easily and safely pull it out of the outlet.

Evaluation "IVD": design- 3, functionality- 4, ergonomics - 5.

WK980 (Kenwood).

A sufficiently massive housing (1.8kg) is made of transparent plastic and stainless steel. Thanks to the transparent plastic, it is clearly visible when water boats. The power of the device is 2.2 kW, capacity - 1,2l, the length of the cord is 0.8m. The kettle is equipped with a replaceable cartridge filter, the cartridge resource - 150l. The water level scale is also provided, the electronic cartridge resource indicator, the light indication of the operating mode. The heating time of 1 l water was 3 minutes 5 s. Boiling water managed to blame without lost drops. Price model - 3.5 thousand rubles.

Summary. The design of the housing "at height": the device looks very and quite effectively. The unique feature of the model is to use the cartridge filter. The device is saturated with various functions. Disadvantages relate only to the area of ​​ergonomics - the kettle is not very convenient in operation due to the impressive mass and the lack of the usual graduation scale (in liters).

Evaluation "IVD": design- 5, functionality- 5, ergonomics - 3.

AquaControl FLF2 (Krups).

Model with a capacity of 1.6 l and 2.2 kW. Equipped with a hidden heating element, a central compound, a length of 0.75m. The casing of the kettle is made of opaque dark plastic. The cover is removed manually. So that it does not fall during the spill of boiling water, it has a latch. Along with the removable filter, the kettle is equipped with a boiling water supply regulator, made in the form of a curricular switch. Water boiling time was 3 minutes 9 s. Boiling water spills in cups without loss. Price model - 1.7 thousand rubles.

Summary. The original design of the lid has its advantages and cons. To open the kettle, you need to act with two hands (one turns the lid, the other holds the kettle). If before that the device boiled water, it is necessary to act quickly, otherwise there is a risk of screaming. LED indicator, located on the handle, is not visible very well.

Evaluation "IVD": design- 4, functionality- 4, ergonomics, 3.

TWK 8 SL1 Solitaire (Bosch).

The kettle from the designer series of devices for breakfast, which also includes a toaster and coffee maker. The housing made of translucent blue plastic, from below and from above bordered by an aluminum strip. Length Cord - 0.75m. The handle is made of non-slip black plastic. The device warms the water vigorously, its result is 1l for 2 minutes 56 p. Power power consumption is 2.4 kW, capacity - 1.7l. Oddly enough, in the process of work, the plastic part of the housing was harmed more aluminum. The button on the lid is located so as not to scream when manipulating with a kettle. The spout is made almost exemplary: in the process of bottling, boiling water passed only one "non-crumb" drop. Price model - 2 thousand rubles.

Summary. The device demonstrates a successful combination of an attractive appearance and practicality. Thanks to the transparent body, the water is clearly visible, but the degree of calibration is difficult.

Evaluation of "IVD": design- 5, functionality- 4, ergonomics - 4.

HD 4690 (Philips).

Model with a housing of non-heated aluminum. Cord with a length of 0.7m. The injection is provided with a hidden flat heating element, water level indicator, backlight when working, the heating end beep. The lid opens by pressing the button. Boiling time 1l water - 3min 12 s. This is not too impressive result, especially if you consider that the power of the device is 2.4 kW. Capacity of the kettle - 1,5l. Spilled boiling water in cups passed without "losses". Price, 2.4 thousand rubles.

Summary. The kettle looks stylish, convenient to use. The "signaling system" is well thought out: a large window with an indication of the water level, the spectacular backlight, which is clearly visible at any time of the day, the boiling signal. I was pleased with the fact that in the course of work the kettle was not heated excessive, in any case, not as much as models with a all-metal case. The only minus is a relatively low water booster rate.

Evaluation of "IVD": design- 5, functionality- 4, ergonomics - 4.

TW 911 P2 (Siemens).

2.4 kW kettle and a capacity of 1.5 liters, with an aluminum housing and a flat heating element. Stand with a central connection that ensures the rotation of the kettle on the stand on 360o. A cable with a length of 0.75m, if necessary, is easily removed inside the stand. The body, equipped with effective thermal insulation, is heated weakly during operation. The device includes a removable mesh filter that prevents solid particle from entering the prepared drink. Not bad sound insulation - when boiling water, the kettle is almost no noise. The power switching button is well highlighted, it can be seen even on a sunny day. Original design measuring line-like light reflector. Despite its small sizes, it is clearly seen how the kettle is filled, regardless of the angle of view. Boiling time 1l water - 2min 58 s. Spill boiling water passed perfectly, without lost drops. Price model - 2.3 thousand rubles.

Summary. The model from the famous designer series of kitchen appliances Siemens Porsche Design-2 really looks great. In addition to the kettle, the designer series includes a coffee maker, toaster, blender and kitchen scales. The body is elegantly elongated and the instrument is more like a coffee pot, rather than the usual fooling kettle with a whistle. However, the neck is narrowing to fill the teapot with water from the dishes with a wide sculpture. The case of the device during operation heats up weakly. Practical pickers of practicality also want to note the successful design of the backlight and the water level indicator.

Evaluation "IVD": design- 5, functionality- 5, ergonomics - 4.

Spirit of TEA BK4611 (Tefal).

The model is a "tea set" consisting of a kettle for boiling water, a brewing kettle and a shared tray. All this is made of white, beige or blue plastic; A welding teapot is equipped with a glass flask. Packages of the kettle for boiling water: Power - 2.25 kW, volume - 1.7L, flask of traditional pitched form. There is a window with a water level indicator. The tray is equipped with a central compound that provides a 360 kettle rotation. The length of the included cord is 0.75m (the cord is disconnected for the convenience of transferring the tray and can be replaced longer if necessary). The time spent by the boiling device 1l of water turned out to be very small- 2 minutes 56 p. Drops on the spout after spill boiling water was not discovered. The cost of the tea set is 2.5 thousand rubles.

Summary. The tea set attracts attention to the unusual concept, such products in our review offers only Tefal. And in general, there are few such sets, although their advantages of one "aesthetics" are not limited. The weak heating of the boiler kettle allows, for example, brew tea is more efficient and efficiently. Apodomnos with a detachable wire facilitates the "transportation" of the kit. The traditional shape of the kettle provides convenience of manipulation with it. Ergonomics design - on height. Kednostats can be attributed the absence of a remote opening button of the lid. The last one has to be opened by hand, because of which the risk increases by chance.

Evaluation "IVD": design- 4, functionality- 5, ergonomics - 4.

Brunch KE806 (Rowenta).

The kettle is part of the eponymous series of breakfast devices (together with the coffee maker and toaster). The housing is made of colored plastic with aluminum insert (color options: white, graphite, grenades, blue velvet). The device is equipped with a central connection, automatic shutdown and smooth lifting systems (a button is located on it). Power model - 2.4 kW, capacity - 1.7l. The time for bringing to a boiling of 1l water it took unexpectedly many- 3 minutes of 15 s. Spill boiling water passed "without loss." The cost of the model is 1.4 thousand rubles.

Summary. Impressive interesting, expressive shape of the kettle (designer Jan-Philippe Lenklo). Such a device will look good in the interior made in the style of High-tech. At the same time, the construction of the case is quite convenient: even a complete kettle "does not strain the" hand brush. Kednostats can be attributed, perhaps, only time leaving for boiling water.

Evaluation of "IVD": design- 5, functionality- 4, ergonomics - 4.

Vitreo (UFESA).

A teapot with a hidden heating element and a central contact, providing rotation by 360. He has a glass flask. The base, the lid and the handle are made of a plastic of a salad color, the length of the cord is 0.8m. The lid with the locking clip opens manually, completely separated from the case. The device is equipped with a measuring scale of water level and LED indicator of the operation mode (on one side of the case). Bringing to boiling 1l water required 3min 10 s. Pour boiling water managed with minimal losses. The cost of the model is 1150rub.

Summary. Simple and convenient model. Attention to the flask from the heat-resistant glass of the Schott brand (Germany). Glass flasks at all occur rarely, especially in the price segment to 1.2 thousand rubles. Glass provides a great overview of the "subsoil" of the device. The disadvantage of the model can be considered a poorly distinguishable measuring scale of water level.

Evaluation of "IVD": design- 4, functionality- 4, ergonomics - 4.

Instead of results

So, we tried with maximum objectivity to appreciate the electric ketties presented to us in three criteria: design, functionality (available number of functions, heating rate, spout design), ergonomics (convenience and safety). Unambiguous leader to identify failed. Yes, it would be impossible, given that the review contains instruments from different price categories, not to mention these models like NC-EM40P (Panasonic), WK980 (Kenwood) or Spirit of TEA (Tefal), which in the usual framework Just do not fit.

Design. In general, several trends can be distinguished, but the main thing is the metal is still in fashion. Many models of higher and medium price categories have metal housings, despite the fact that they are better carried out heat (and therefore, there is a chance to burn, and boiling water cools faster in them). No less popular models with plastic housing, but with metal linings, it is combined here, so to speak, pleasant with useful.

Functionality. The absolute leader in the number of functions is the NC-EM40P model (Panasonic). Accurate, only with the help of this device you can achieve a long-term maintenance of high water temperature. Hospital, most modern teapots with automatic protective shutdown do not allow how to boil water to destroy some pathogenic microorganisms. As for the speed, then business people who are not wishing to languish, like the heroes of Jerome K. Jerome, waiting for boiling water, you can recommend Teapots 3317 BK (Bork), TW 911 P2 (Siemens), TWK 8 SL1 (Bosch), Spirit of TEA BK4611 (Tefal). All these models showed good results in our peculiar sprint, boiling 1 liter of water faster than 3 minutes.

Ergonomics. Traditionally divide the devices, as in a joke, it does not work for beautiful and smart. WHATS, in accordance with the laws of fashion, the kettle must have a set of fashion model. The ATO makes it difficult to a set of water (especially if the stuffing of the kitchen crane is located low or you have to pour water from the volumetric 5 liter bottle). Finally, and overturn such a teapot much easier. But the coffee shop, filled with water, is much easier to hold in hand. Some ergonomic innovations lead to additional costs. Such is, for example, LED indication or system of lifting (smooth lifting lifting). But here is the design of some unauthorized indicators of work and water levels by manufacturers, as it seems to us, to improve without special costs.

I would like to mention the original indicator in the TW 911 P2 model (Siemens): when the shape is sophisticated, it provides good visibility of the water level. From other technological innovations, you can mention an interesting backlight system in the HD 4690 kettle (Philips) - not to notice it is almost impossible. The Kettle WK980 (Kenwood) was pleasantly surprised by a replaceable cartridge filter. A very favorable impression was made by the ADPA Lirys (Moulinex) model with the original design of the plug, easily removed from the outlet.

The editors thanks the representative offices of the BSH household appliances companies, Bork, Delonghi, Groupe SEB, Panasonic, Philips, Ufesa for help in preparing the material.