We offer simple actions that will help extend the life of washing and dishwasher, air conditioning and other household devices.
1 washing machine
The washing machines between the door and the case there is a rubber gasket. Most manufacturers recommend wipe it with something dry after washing to remove the remaining water. If this is not done, due to high humidity on the rubber band and mold is formed under it. But if in your bathroom there is dry air, just leave the doors of the washing machine open after washing - the excess moisture will evaporate.
If the car started to buzz while dragging and annealing, after the washing is completed, check the hatch that leads to the pump - it could get something stuck in it, for example, a trifle you forgot to get from the pockets of things before sending them to the drum.
It is also important to fully enjoy special means for washing machines. For example, if an unpleasant smell has appeared, you can purchase a special detergent and use it precisely in accordance with the instructions.
During the usual washing, do not forget to use gel to mitigate water and combat lime deposits.
2 Refrigerator
On the rear surface of the refrigerator is a compressor. Over time, it settles the dust and dirt layer, which needs to be cleaned at least once every six months, having previously turned off the device from the outlet. If this is not done, the refrigerator can overheat.
You also need to check the state of the gum that adjies to the door. A few years after the purchase, it can be wary, and then the fit will be loose. Because of this, the refrigerator will have to spend more electricity, it will overheat, and the condensate and ice will be formed inside. If you notice such a problem - call specialists from the company where they bought a refrigerator, and change the gum. However, it can be done with your own hands.
Also follow the products in the freezer and mainly compartment. Due to spoiled products, mold may appear and unpleasant smell.
3 air conditioning
Inside the air conditioner there is a filter on which dust settles. In order not to breathe it, once every six months, remove the front plate of the case and deliver the filter to clean. When cleaning, use gentle detergents and water, and at the end wipe the surface dry.
You also need to periodically clean the fan in the outdoor unit of the air conditioner. It is better to trust this work to specialists, as it is unsafe and disassemble the block, hanging outside, not easy.
4 Kitchen hood
On the kitchen hood, oil and dust settles. Therefore, it is necessary to clean it every 2-3 months. To do this, turn off the hood from the network and remove its outer grille. It is possible to wash it with the usual means to wash the dishes under running water, or, if pollution is strong, with a special active detergent for kitchen hoods. Also rinsed the outer and inside of the case.
Do not use the tools for washing windows or plumbing, they can change the color of the material from which the extract is made and disrupt its integrity.
5 Stationary computer
Dust falls due to the cooling fan in the computer case. If it is regularly not cleaned, the elements of the system block will overheat and fail.
To clean the block, disconnect it from electricity. Make a photo of the back wall to which different wires are connected, and then disconnect them. With the help of the photo you can then connect everything into place. Next, carefully unscrew the bolts that are connected to the case of the block of the block on which the parts are not fixed. If the computer is assembled qualitatively, you can not worry that in the process of cleaning something falls off and use a special miniature vacuum cleaner for the system unit. If there is no such vacuum cleaner, take a clean wide brush for drawing.
6 Dishwasher
The best prevention for this technique is to use a special salt. It softens the water and prevent the formation of scale. Manufacturers include a special, cleaned salt, so do not try to replace it with an ordinary cooking.
Also regularly let's dry, if you do not use drying functions with hot air. To do this, you can leave the door slightly ajar when the dishwasher is not used.
Clean the rubberized joint of the housing with the door to regularly, so that the mold does not start there. And do not forget to sometimes check the pallet for the dishes, there may be a meal, and therefore bacteria.
