We tell the more efficiently to remove the flare and scale, how to plan work right and what funds are not suitable for cleaning.
The humidifier helps to create a microclimate in the apartment, which favorably affects the condition of man, pets and even plants, reduces the amount of dust in the house. If you properly care for machinery and follow the quality and rigidity of the water used, the device will work in more than many years. We tell how to clean the air humidifier from scale and bacteria and how to use it correctly, so that he will serve for a long time.
All about cleansing air humidifier
Why the device is dumpingPlicing stages
What means you need to wash
How to use it is impossible
How to care for further
Why the device is dumping
It is necessary to figure out where the flask appears in the air humidifier and is it possible to slow down the process of formation of dirt. With the outside of the device, everything is clear: as everywhere, dust and dirt there are taken from the environment. Here it is worth making a remark about abrasives: you do not need to use such means to clean such devices outside, choose soft compositions. The simplest thing is to make a soap solution and process the surface with a soft sponge.
On the inside of pollution is more complex. They are formed from constant contact with water. And depending on its stiffness, they will be more or less strong. But even in filtered water, mineral suspensions are present, which over time still form a film on the tank. The most frequent satellites of the plaque are such impurities as lime, magnesium, manganese, chlorides and sulfates. And there are still a variety of organic compounds that, if not washing the device, contribute to the reproduction of mold and the formation of mucus. This is not only not aesthetically, but also very dangerous for health, because the device affects the composition of the air that you breathe, and if there is a mold in it - it will be in the room.
How to clean ultrasonic or ordinary air humidifier
Before proceeding with the work, it is necessary to familiarize yourself with the stages of cleaning the air humidifier. It is important to strictly observe the sequence so as not to break the device.
- First of all, you need to turn off the device from the network.
- After that, all components are pulled out and disassembled, water is poured.
- Cold running water need to rinse the filter.
- All other parts wipe with a damp cloth.
- In the reservoir, pour cleaning fluid and leave for several hours (it depends on how contaminants will be eliminated).
- After that, the solution is poured, the tank is thoroughly washed and swell dry.
- If necessary, the procedure is repeated again.
4 simple and working facilities for cleaning air humidifier
You can buy them in a regular supermarket, they are budgets and perfectly coped with mud. And thanks to the environmentally friendly composition is not harmful to health. So, how and what to clean the air humidifier from mold and mucus?1. Lemon Acid
This is a popular component in a variety of environmentally friendly cleaning compositions. But also citric acid is effective in itself in the form of a solution. Since this is not a chemical, a pair of citric acid is not dangerous, and when working with it, you can not use personal protective equipment at all. The exception is only those people who have allergies. Clean the air humidifier with citric acid can be several ways. For example, make a solution and with a soft cloth go through pollution. This method is good for the outer side of the device. From the inside, it is better to use something more powerful, for example, to make a paste of citric acid and with a rigid brush cleaner. In addition, the solution can be additionally pouring into the water tank and leave overnight.
2. Soda
Soda is a known means in the arsenal of cooks, often used to clean the dishes and cleaning. With the help of soda, you can not only remove the dirt, but also to disinfect the surface, it works as an antiseptic. Before cleaning the air humidifier from the plaque with the help of soda, it needs to be divorced. In the dry form, it is impossible to use powder, it will be less effective, and it can also damage plastic parts, leaving the microarpars on them and spoil the beautiful glossy shine. To remove the flare, make a solution of food soda and water at the rate of one spoon of powder on a glass. This liquid can be pouring into the flask, wipe it pollution. After work, it is necessary to thoroughly rinse the device and wipe dry, because there may be divorces otherwise.
3. Vinegar
According to its cleaning properties, this is an analogue of citric acid, but with a sharper smell. It causes irritation of the mucous meat, so during cleaning it is better to open the window and do not breathe directly above the tank. Table vinegar for work you need to breed in half with water. It is not recommended a more concentrated solution, it is quite aggressive in working with plastic and is not always clear how the material will react to such an impact. Plus, the fragrance will evaporate from your apartment longer.4. Funds from the store
Of course, one people's recipes could not do, there is still a whole line of special means for such devices that can be bought in the store. Such formulations can remove not only the scale and mucus, but also rust. To protect the moisturizer, try to apply a little such a product on a small area of plastic and look at the effect. If everything is in order, you can work.
What can not be cleaned
All means for removing the plaque and mucus is rather soft, it is not by chance. It is impossible to use more aggressive compositions, because they are harder to wash out of the tank, and when the pair can be inserted into the air and cause poisoning. It is strictly recommended to use the following ingredients.
- Chlorine and all means with her.
- Concentrated acids.
- Alcohol.
- Kerosene.
- Petrol.
- Hydrogen peroxide.
- Acetone.
Even if you can vouch for the perfect cleanliness of the device after working with these aggressive means, it is still worth refraining, because such compositions can affect plastic by provoking the early appearance of yellowness and more laborious spots.
How to care for the device
To keep the device in a clean and good condition, it needs not only properly operate, but also take care of regular care. Observe the following rules.
- Cleaning must be carried out with that frequency, which is indicated in the manual: it usually includes washing the filter or its replacement, washing parts and water tank itself.
- It is important not to leave the device included, even if you decide to rinse only the flask. A random drop can cause closure and the device burns. Cord, plug and fan must always be perfectly dry.
- If one of the parts broke or deteriorated during cleaning, for example, a housing, cord or fan, the device cannot be operated, even if it works on the view unchanged. Contact your repair service.
- Read the instructions. It says not only about how to properly use the subject, but and what means it is better to clean it.
- Try to use the most clean water: perfectly distilled, but if you do not have the ability to get it, and the usual, but filtered water is suitable. So on the inside there will be less than the plaque, and in the air - less harmful impurities.
