We tell what to pay attention to, choosing the iron: power, self-cleaning and sweeping functions, weight and other important functions. And also give top models.
Even if you do not like to iron, there are objects that constantly need regular ironing and sweeping. We tell how to choose the iron to enjoy them with pleasure.
How to choose the best iron
Selection parameters- shape and sole material
- Power
- Weight
- Outpassion
- Anti-Pipe System
- the possibility of self-cleaning
Additional functions
Rating the best models
Selection parameters
1. Form and sole material
A comfortable sole that easily slides on the fabric is a pledge of a pleasant and efficient ironing. The form matters. If you have a lot of things of a complex cut with an abundance of decorative parts, a model with a sharp spout is suitable to thoroughly stroke hard to reach places. The wider form will be useful for smoothing bed linen or large articles.
In general, the ideal sole should be evenly warm, to be wear-resistant, it is easy to slide along the fabric and smoothing not only qualitatively, but also carefully.
Pay attention to the material that was used in the manufacture.
- Cheap material - aluminum. But such a product will not be durable and durable - scratches will appear on it.
- The model with a steel base is heavy and long heating. Also for a long time she cools. As a rule, older models are equipped with such soles.
- Ceramics is the same short-lived material, as well as aluminum, although it is much more expensive. Ceramic sole slides perfectly and drives fabric. It is easy to clean, does not matter and does not cling to clothes. Although if the scratch appeared, the quality of the ironing decreases.
- Teflon is an anti-larger material, it is also easy to clean it. Such a device provides a slight slip and drives fabric, but, as well as ceramic, rather vulnerable to mechanical damage.
- Composite materials are distinguished by their wear resistance. They are less likely to form chips and scratches. The remaining qualities are not inferior to alternative materials - the sole of the composite also slides well and strokes things.
- Titan is one of the most durable coatings. It is resistant to scratches and chips, they can easily go through accessories - there will be no traces on the product. The product coated from titanium, due to its strength and convenience of ironing, is quite expensive.
2. Power
Almost all modern models have the optimal capacity for high-quality ironing things - from 1,700 to 2,500 watts. They can be stroked all: from a simple fine shirt to a dense coat. But if all this is good irons for the house, then what better to choose?
Increased power of the iron will heat up faster to maximum temperature. This is relevant for technology with a steam strike function - the faster the device will warm up, the faster it will be ready for an excrement. However, the capacity of more than 2,000 W will be superfluous - there is no real need for a household ironing environment.
3. Weight
On the one hand, the easier the technique, the more convenient to keep it in hand, which means the ironing process will be more comfortable. But on the other hand, too light product will be worse to cope with its main function - smoothing the folds. Optimal weight: from 1.5 to 2 kilograms. If some parts of the device are made of steel, it will be harder. It is best to hold the device in hand before buying.
4. Availability of excavation
Fabric moisturizing can be done through the sole during ironing or spraying before starting work. Sometimes some models are supplied with a steam supply option through a spout. It is useful for smoothing cuffs and collar. Some technique will help to sip the thing in a vertical position. It is convenient if you need to quickly refresh the curtains or clothes on the hangers in the closet.So what iron is better to buy for home? For high-quality smoothing of the outerwear, some devices provide a steam strike function. This is an extreme excavation, which occupies a few seconds and occurring at high power. Steam punch by force of 200 g allows you to smooth even very strong chances and folds. But sometimes steam can be served uncontrollably. For high-quality sweeping, it is necessary that the holes for feeding the steam are located across the sole, and not only on the nose. This will allow moistening the fabric throughout the closed surface.
What else is important for a good sweeping?
- Perhaps you will be useful to the size of the reservoir. It usually accommodates 200 ml of liquid, but there are also those that accommodate 400 ml. This will allow you to pour more water and not distracted from the ironing process. The tank is better to choose transparent to monitor the fluid level.
- The limestone cassette will save the device, and at the same time and clothing from the formation of scale. If you have too hard water and no filter, to calmly pour water into the iron straight from under the tap, change the lime cassette at least once a month. You can refuse the cassette, but then you need to use distilled, purified or boiled water.
5. Antipple system
It protects clothes from water leaks when ironing at low temperatures. For example, if you use the mode of 100 degrees and less, the special valve will close and the tank with the liquid for supplying the pair will be sealed. Wet spots may appear without this function on clothing, which, after drying, leave the product divorce.
6. The possibility of self-cleaning
Water, even quite acceptable in composition and rigidity, can still be the cause of the formation of a limescale. This fall does not harm not only the technique, but also the reason for the formation of divorces on clothing. In order not to proceed things and not repair the iron more often than required, the device must be regularly brushed from scale. It is more convenient to do this with the help of a special self-cleaning function. All you need is once a month click on the button and wait until the device is cleaned independently.
What other functions will be useful
- AutoCillion - help not worry if you do not remember whether the technique turned off before leaving home. Just put the timer, and the shutdown will automatically happen.
- No wire - for this function will have to overpay, but you will not depend on the outlets and the length of the wire, using the iron where you are comfortable right now. Choose the battery more powerful to work without recharging.
- Length and fastening of the cord - the longer the wire, the more convenient to connect the device and use it. But the long wire can be confused, so it is important to pay attention to the method of compound in a particular model (optimal - ball).
- Illumination - Thanks to this feature, it is possible to better see the chances and folds, which means to try it in more detail or sip the thing.
Rating of the best irons for 2021
We studied the most positive reviews on models and amounted to their best ranking of the best irons of 2021 in price and quality.
Philips Azur GC 4535/20. Among his advantages, users note the good quality ironing, the presence of an excrement. The device is equipped with a scale reservoir. Among the disadvantages they are called the absence of autotrunction, not a very long cord and heavy weight (sometimes it acts as a dignity, as it allows to smooth out the folds of the fabric).
Smart Morphy Richards 305003 Smart Steam Generator. It is equipped with a built-in steam generator and can automatically adjust the temperature. Excellent smoothes collars, folds and cuffs, they can be disappearing clothes right on the hangers. However, to switch with more dense tissues, the device takes some time to reduce the temperature - otherwise it can spray water from the tank. There are backlight from additional features. Notes insufficient power in Eco mode, and on turbo mode - high water consumption.
Magio MG-543. Budget brand, according to reviews, is not inferior to well-known manufacturers. Magio Mg-54 is also equipped with a vertical excipation function. If you leave it for a long time, a beep is activated, resembling that the device is still on. There is also a function of automatic shutdown. Among the disadvantages, there are water leakage in some cases. By the way, the sole here is ceramic, which means quite fragile.
Braun Texstyle 7 TS 745 A. The advantages of this model include the success of the steam holes - they are equipped with even the spout of the device, which allows you to get to the most difficult places. The device quickly heats up and smoothes things well.
Tefal Comfort Glide FV2675E0. Its main characteristics include power - 2,500 W, steam blow - 150 g / min and steam supply - 40 g / min. The device is quickly heated and well drives things, but without a couple the quality of ironing is worse. The steam blow copes well even with deep lies. Also among the advantages note the comfortable neck for watering water.