How to paint interior doors: instructions in 8 steps and useful tips

We are talking about choosing paint, colors, optimal conditions for work and give instructions for staining.

Painting of interroom doors is an easy way to update outdated furnishings and at the same time give a new type of interior. We tell about the peculiarities of the process.

Paint interroom doors

Selecting paint

Color selection

Optimal conditions

Process of coloring

Cleaning of brushes

Before painting interroom doors, you need to figure it out in the types of structures. There are different options: swing, sliding, folding. However, in most of our apartments they are installed precisely. They provide privacy and play a noticeable decorative role in the interior.

Classic genre - wood designs. They are still often found in the input zone, separate the bathrooms and bathrooms and other apartments. More budget structures are performed from chipboard and MDF.

Now go to how to paint the wooden door, as well as products from substitutes, but first - about choosing paint for doors.

What paint paint interior doors

First of all, you should determine which composition to choose: on a solvent or water based?

Means on solvent

These compositions evenly fall on the surface. The hardened layer is resistant to abrasion and periodic cleansing wet cloth. However, the process of applying material on a solvent and the drying time of the colorful layer is accompanied by a sharp smell, and to clean the brushes and rollers, the solvent will be required, for example, the White spirit.

Water based

Paints for interior doors on a water basis are quick-drying and odorless. They are easy to apply, and the working instruments from them are mounted with ordinary water. However, products painted on water-based compositions are not tolerated active wet cleaning.

Iron parts (loops, handles) usually do not touch when repainted.

What color to choose

Of course, it depends on your preferences and interior requirements. The most popular options, with universal, is white and color "under the tree". White relevant in minimalist, Scandinavian, classic styles. As well as the color of the tree, but the latter will also fit into the Loft style. You can choose two different shades: paint one door from the inside room under the color of the walls, for example, and the other side that goes into the corridor, to arrange in another color.

Optimal conditions for painting

The permissible temperature during operation from +5 to + 30 ° C, the relative humidity of the air is 60%. It is undesirable to paint the cold surfaces below + 5 ° C. Also, it is worth avoiding direct sunlight and high humidity.

Stages of painting interior doors do it yourself

1. First of all, the door canvas must be removed from the loops and attribute to the place that is suitable for painting works.
2. The surface must be cleaned from dust using a lounge fabric or a vacuum cleaner with a nozzle as a soft brush. If necessary, degrease and dry. From previously painted elements, remove the layers of the old coating, and then polish the product and coat the soil for the best "sticking" of the new layer. All metal parts it is important to stuck so as not to get paint.
3. The door frame in the opening also needs to be pulled out a fine-grained grinding skin (180 or 200). Larger grains will leave deep traces on the surface of the tree. Subsequently, they can be noticeable through the colorful layer.
4. Then the box must be covered with soil.
5. Before applying, mix the painting composition thoroughly. Apply it with a brush, a small roller with a short pile or by paint. A thick paint on a solvent or water basis for the convenience of work it is necessary to dilute, respectively, the White spirit or water, but not more than 10% of the total mass.
6. For the dried soil, apply two layers of paint with a mandatory intermediate drying.
7. After removing the dust and applying the soil, proceed to staining complex and small parts. In this case, it is better to work with a small tassel.
8. On large areas, make a roller on the line, it will noticeably speed up your workflow.

Cleaning tools from paint traces

After working with a water-soluble composition, a roller or brush should be omitted in warm water for 2 hours. Then washed under the jet of water and wipe. Keep the tools in a dry room. It is best to carry them down a bristle. Purchase with the remnants of the material on the solvent, immerse in the coat with White-spirit. And he must reach the base of the bristles. After 2 hours, we rinse the tool and wipe the cloth.

Brushes with which the composition was applied on a solvent, undesirable to use a water-based composition for work and vice versa, no matter how well they were cleaned.

For breaks in working with painting tools, you need to remove excess paint and fascinate into the food film or plastic bag. The edges can be sick with painting scotch, to exclude air from entering, and put the devices in a cool place. So the tool is permissible to leave for two days, but not more.