How to paint chipboard at home: detailed instructions in 3 steps

We tell how to choose paint, what tools will be needed to work, how to prepare the surface of the furniture and paint it.

Old, but strong dresser or wardrobe will still serve if they correctly update them. No one doubts that the tree can be repainted, but how to deal with chipboard? Do not doubt, they are also subject to re-staining. Let's wonder how to paint the chipboard and do not spoil it at the same time.

All about how to paint chipboard

Features of material processing

What paint is better to take

Stages of painting

1. Choose tools
2. Cooking the foundation
3. Krasim furniture

Features of painting material

For repainting products from the wood-chipboard at home, not every wizard will take place. The complexity lies in the fact that the general name combines several groups of different materials processing. Each of them requires a special approach.

Types of DPP

• Laminated. A film is superimposed on the base, processed under the thermal depress. It turns out a durable protective and decorative layer. Before the repainting, remove it is completely impossible.
• Lacquered. The base is decorated, after which several layers of varnish are superimposed on it. After drying, it is very durable, smooth film. It is almost impossible to repaint it, it is easier to polish.
• Veneered. A veneer plates glued on a high pressure plate. For repainting, only a few types of drugs are used, in their number, moroli and varnishes.
• Kashned. Paper decor pasted on the base. This is the most fragile design. Before the repainting is required to fully remove the paper and clean the details from the glue.

Manufacturers produce other types of chipboard, but for the manufacture of the situation they are used very rarely.

What paint can paint furniture from chipboard

To finally do not spoil the old wardrobe or table, you must correctly pick up the coloring drug.

Types of colors

• Oil. A mixture of vegetable or synthetic oils with pigments and other fillers. It covers the base well, forms a dense film. It has a sharp smell, long dries.
• Alkyd. Analogue of oil enamel, but instead of oils are used alkyd resins. It dries faster, it is better to hold on the material.
• Acrylic. A variety of water-dispersed paints. Bright colors, high hideiness, quickly dry, not toxic, odorless. For smooth coatings, blend mixtures with increased adhesion.

For painting of furniture from chipboard use more varnishes and verses. The latter are good for the composure of veneered plates. Varnish is used as an independent decor or fix the colorful layer. Some formulations are available in the form of liquids and aerosols. Under large surfaces, the paint is chosen in the jar, for small fragments or for the tin it is better to take an aerosol.

• 

Stages of work

The painting process is quite complicated. To make the result, before painting the furniture from the chipboard, it is necessary to choose the right tools to buy suitable materials for processing and accurately execute manufacturer's instructions. It is better to work on the street, since most solutions have a sharp smell, or on a loggia behind a tightly closed door. Let us analyze all stages of work in detail.

1. Choose materials and tools

So that the new coating was smooth and durable, except the paint will need primer. Better close to color to color, which should turn out in the end, or white. She prepares the basis for painting. It is advisable to buy a composition raising adhesion. It will improve the grip of the coloring drug with a stove. In addition, the use of primer significantly reduces paint consumption. Therefore, the primer is necessarily imposed, it is better in two layers.

In addition, the degreaser will need. Better in the form of an aerosol with a comfortable sprayer. You can buy a special tool or bypass by any solvent or White spirit. To process the base before painting a chipboard at home, a small stacker will be required, rags and greasy tape.

Paint tools

• Roller With it, you need to be able to apply a thin layer of composition. In the thickness, there will be influx or drifts. For painting with your own hands it is better to choose a roller with a fur coat, the pile of medium length.
• Kraspopult. Evenly sprinkles the coloring drug. It is important to choose the right distance on which the nozzle of the device should be. If it is too large, the fluid does not reach the surface to be painted, if it is too small, there will appear in and drip.
• Sponge of foam rubber. Not the best choice. To get a smooth coating, it is necessary to paint very carefully, well distribute the kel on the surface. It is quite difficult.

Regardless which tool is intended to be used, you need to cook more. It will be needed to cry out the hard-to-reach areas, ends, etc.

2. We carry out preparatory work

First prepare a workplace. If the furniture is cumbersome and make it impossible, removed from the room all too much. The floor and walls are closed near plastic film, old newspapers or packaging cardboard. If possible, you need to open windows, because the compositions for processing and painting are smelling very unpleasant, but interior doors, on the contrary, close.

In the recommendations, how to paint with your own hands a wardrobe from a chipboard or any other similar furniture, it is said that it is necessary to start with her disassembly. The design disassembles completely or partly if it is supposed to be painted only a small fragment. All accessories are removed. Her presence makes it difficult to prepare and painting. During the parsing, it is advisable to numbered parts, and it is better to take the sequence of work. This will simplify the subsequent assembly.

The furniture fragment is placed on a solid smooth surface, for example, on the worktop. It is treated with shallow emery paper. To be more convenient, it is fixed on a small bar with a handle. Grinders for processing use undesirable, great risk damage the basis. The main task of processing is to make the surface of the roughness to increase the grip with trim.

After stripping, dust and sawdust is removed. Detail carefully examine. Detected chips, cracks and other defects should be sealing. To do this, take a putty on the tree, bred it in accordance with the instructions. A small spatula is neatly filled with flaws, smoothed the surface. Give to dry completely, clean the shallow skin. Then go to primed.

Usually, the primer is ready for work, it only needs to mix. The composition is poured into the pallet, from where the roller is gaining. You can work and brush, but only so that there is no amusement left. First, the first layer is superimposed. He is given to dry completely. It takes several hours. You can refine information by reading the instructions on the package. Then the dry base is processed by primer again. Rest people are waiting for a complete drying, cleaned with sandpaper.

3. Prayes Furniture

At this stage, it is important to properly apply the selected paint. Moreover, the result depends largely on its composition. It is especially important for LDSP. Even after careful preparation, the coating remains smooth, it is good for it not every mixture. Therefore, it is necessary to carefully choose which paint to paint furniture from laminated chipboard, and which tools for this use.

Sequence of staining

1. Preparing the composition for work. Pretty stirring it, if necessary, collair and stir again. Pour into the pallet.
2. We take the roller, omit in the tray, soak the solution from all sides. Then we roll along the pallet wall, press the excess.
3. We assign the first layer. We start from the middle, carefully rub the painting paste on the base. There should be a uniform coating of a small thickness, without influx and drills. End and hard-to-reach areas process brush. We are waiting until the makeup will dry.
4. We apply the second layer in the same way as the first, let dry.

To obtain a protective layer, you can paint the finished part of varnish, colorless or tinted. It is a little more difficult to work with the paintopult, however, the result is usually better. For him, the coloring paste is divorced to a liquid state, poured into a special tank. Before painting, it is recommended to test the instrument on the cardboard or any other unnecessary material. This is so selected the distance from which the part is processed.

Sometimes you need not only to paint furniture from chipboard with your own hands, but also decorate it. Then before applying the varnish, the blank decorated. It may be painted, manual or stencil, decoupage from napkins or special prints, appliqués, etc. The furniture decorated in this way becomes the center of attraction of the kitchen, bedroom or hallway. Several layers of varnish are superimposed on top of the decor.

Instructions, how to paint the cabinet or other objects of the setting of chipboard, simple and easily performed. It is important to accurately follow the instructions, do everything neatly and carefully. The result depends on the quality of preparatory work, the correctness of the choice of the coloring composition, the technology of applied.

•