Winter - it's time when piercing wind and prickly frost make people spend a maximum of time in the walls of the house. That is why it is so important that even a comfortable microclimate was maintained in the housing. We have prepared a check list of 3 points, the execution of which will make the cottage to the place where it is always cozy and warm.
1 Warm windows
Exact windows in the house - the present gate for the cold. Even through small gaps, the room may lose about 20% of heat. Therefore, the first point of our winter check-leaf is the insulation of window openings using Prestige's rollt from the range of Alutech Group of Companies.How does aluminum structures help to keep the comfortable temperature in the house?
Prestige rolls are folding systems consisting of roller rolling profiles. It is due to the high quality and density of the foam, which they are filled with the thermal insulation properties of protective structures rise at times. Another factor contributing to the maintenance of heat in the house is an air layer that is formed between the window and the canvas when shutters are closed. Challenged solutions allow to reduce heat loss through windows up to 30%.
The hosts and this will not seem enough, can order Prestige rolls from the AR / 41T thermopropille. His characteristic feature and the main advantage is a special thermal stitching of a silver color, which is applied to the inner side of the profile. Aluminum particles provide a high heat transfer coefficient, due to which the heat loss through the windows when using the roll is reduced to 50%!
2 Equipping a warm garage
Windows are insulated and no longer Achilles fifth house. It's time to think about how to increase the energy efficiency of the garage. After all, it is often located in the ground floor of the cottage or has a common wall with a home and affects the microclimate of residential premises. Therefore, the second point of our check-leaf is a warm garage equipment.And again, the products "Alutech" come to the rescue. The Group of Companies offers Prestige Sectional Gate, which are comparable to thermal conductivity with a 60-centimeter brick wall.
Due to what it became possible?
The base of the gate is the sandwich panel with a thickness of 45 mm. The space between the two durable steel sheets is filled with foam, which serves for additional thermal insulation. In order to achieve a thick adjustment of the canvas to the impeller, adjustable roller brackets are used. Thus, when installing the gate of this series in the garage, there will definitely not "walk" drafts. In addition, the manufacturer provided in the design of two-fledged seals, which even with severe frost remain elastic. The air chamber formed between them serves for additional thermal insulation.
3 Install automatic control systems
Having provided with the help of products "alutech" a comfortable microclimate in the house and garage, you need to take care of the convenient control of protective structures. Indeed, to open in the morning, and in the evening, close rollers on all windows, as well as each time to get out of the car, to manually raise or lower the garage gate canvas, - the pleasure of dubious. Automation of alutech will help to get rid of everyday routine tasks. With the help of one remote, you can control all protective structures in the house, on the site and even illumination of the territory. By the way, in the cold season, the advantages of installing automation are felt stronger: you can open and close the gate, without leaving a warm car interior.
Advantages of electric drives alutech
- Automation Levigato allows you to comfortably control the garage gate. Among the advantages of electric drives - reliability (work for at least 20 years in 4 cycles of open-closing per day), safety (drives are equipped with an obstacle detection system that will not allow the gate to damage the car), a stylish design from Italian designers. For additional lighting of the garage, the drive housing is equipped with LED backlight.
- Automatics Roteo and AMBO were developed special for inbound gates and fully adapted to open-air operation. The housing reliably protects all drive mechanisms from dust and moisture. In addition, the gateway automatics regularly functions even in the frost -30 ° C.
- ALUTECH automation is designed to simplify the rollers management process. Installing an electric drive makes it possible with the help of the remote control or wall switch open and close all shovers in the house, control the structures on one. Moreover, the motor can be configured so that by pressing the button will open rollers only on one side of the house.
Thus, after performing 3 points of our check, homeowners may meet cold with complete confidence that no bad weather and frosts are terrible and their dwellings.
You can order solutions from "Alutech" for comfortable wintering by reference.
