What an electric heated towel rail to choose: tips and rating manufacturers

Choose an electric heated towel rail for the material, a method of heating, design and other important parameters and give a rating of 9 best manufacturers.

Heating elements for the bathroom are distinguished by a large variety of shapes and sizes. We designate which electric heated towel rail to choose it to come across all the parameters.

All about choosing electric heated towel rails

Benefits

Safety regulations

Parameters

1. Power
2. The method of heating
3. Automatic shutdown
4. Maximum temperature
5. Design
6. Material
7. Additional functions
8. Design

Rating

Advantages of electrical models

Electrical devices have their advantages. First of all, their work does not depend on the presence of hot water in the heating system, it is possible to turn it on or, on the contrary, turn off if it is too hot in the room. In addition, electrical devices are much easier to install. If the water design radiator is prohibited to transfer without permission to a new place, then the electric can be installed anywhere in the apartment. Yes, and to carry out the power in some cases, much easier than letting the tap pipe.

Safety regulations

Any electrical device can be dangerous if neglecting the installation and operation rules. To ensure itself from the danger of electric shock, you need to remember that.

Heated towel rails are installed at a certain distance from all water sources - at least 1 m. At a minimum, one meter in the plan should be separated by the electric power plant for towels and a bath, a toilet, washbasin, shower cabin. In order for a person in contact with water, he could not accidentally grab his hand for the heated towel rail.

Electric towel rail Terminus.

The socket must be performed according to the rules of equipment of electrical installation products for wet rooms. In particular, it must have a moisture-proof index not lower than 4.

All sockets in the bathroom should be connected to the power grid solely through the UzO (the protective shutdown device, which turns off the electricity supply during current leakage, which occurs, for example, at some breakdowns, when the current is supplied to the metal case). As soon as a person touches to such a corpus, there is a leak point through the body into the ground - and the RCO instantly reacts to leakage. For safety, a protective shutdown device, which responds to small leaks, a sensitivity of 30 mA or 10 mA (the less the better, but the 10 mA sensitivity of 10 mA can give false responses when the heavy load is connected). So the current will be turned off and the person most likely will not even feel anything.

Important characteristics for choice

1. Power

The absolute majority of devices have a power within 100-400 W. This is enough to dry the wet underwear, but clearly not enough to heat the room. If you are going to use electric drying for towels as the main source of heat, choose more powerful models - from 500 to 1,800 W.

Energy Energy Ergo Electric Towel

2. The method of heating

Basically, two methods of heating are used. In the first case, the sampling cable is placed inside the metal tube, the same used in the manufacture of warm floors. In the second case, a TEN is installed inside one of the pipes, and the entire cavity of the pipes is filled with a liquid coolant, and the product works in the same way as the oil heater.

Both methods have their advantages and disadvantages. The cable option is good in that there are practically no restrictions on the overall configuration of pipes. In particular, the pipes can be located in almost one horizontal plane, which, of course, more convenient if you are going to hang towels on them. But this method of heating is less powerful. The cable cannot be used in the "Lanenka", where there are complex knots-connections of pipes, only in the "snake". And such a device is not very suitable, for example, as the main heater for the room.

Drying with Tan is usually greater power and can be used as the main heater, and, and, in general, dried faster. But they have restrictions on the configuration of pipes. It is necessary that the heat carrier can easily circulate inside. Therefore, such heated towel rails have a closed contour from the pipes in the form of "ladder" and usually high enough, vertical pipe segments are usually longer than horizontally located.

3. Automatic shutdown

Useful option that will avoid dangerous situations.

Electric heated towel rail argo beam

4. Maximum temperature when heated

There are products capable of warm up to a temperature of 85-90 ° C, but why such extreme in domestic conditions? On the contrary, too hot surface can be dangerous. Therefore, it is better to choose devices with limiting the maximum heating temperature in the range of 60-70 ° C, especially if there are small children in the house.

5. Design

There are a lot of design options, including transitional forms and all kinds of modifications. Of course, it is difficult to say which model is aesthetically more attractive, and in this regard, it is unlikely to be able to make any exact accurate rating of the best electric heated towel rails or, say, the rating of electrical heated towel rails for the bathroom with a thermostat. It is best to evaluate products yourself, and not by description.

Electric towel dryer Sunerja Pareo

Tips for choosing a design

• The more horizontal surfaces, the better. The total length of pipes arranged horizontally determines the possible productivity of the device - how many towels and other bath accessories you can place it.
• Too close arrangement of horizontal pipes may be uncomfortable. The distance between them is preferably at least 15 cm.
• Sharp corners, decorative branches and protruding details can be visually very attractive, but make sure that they are not attempting. In this regard, smooth bends of the round tube seem more reliable.

6. Material

Stainless steel, copper and alloys based on copper are used as material for the housing. What material to give preference is for equipment connected to the power grid, and not to the water supply - is not important. Stainless steel likes many, perceived as solid and reliable material. Copper, brass, bronze - materials, intuitively perceived as expensive and even luxurious - often used in collections performed in retro style. And in the design models in the trim, other materials can be used, sometimes very unexpected, such as glass, ceramics, aluminum, titanium, etc.

7. Additional functions

The design of most models is the same, however, there are exceptions. Some may have the following additional features.

• Shelf. It is convenient to place things on it if necessary.
• Rotary housing. The housing in separate models is attached to hinges, which plus a turn to turn it around the vertical axis. A convenient solution, especially if you need to hang a towels or clothes right away.
• Temperature regulator. Very useful feature that allows you to choose the optimal temperature of heating and drying.

8. Appearance

So, you have decided on the type of equipment, now you need to find out which electric heated towel rail to choose in appearance. Still, this is a designer technique. For the buyer, it matters how much the model corresponds to the overall style stylist. Quite often, people prefer the models of classical design, in the form of curved pipes ("snake") or in the form of "ladder". These forms visually repeat the shapes of traditional pipes connected to hot water, so even come out and do not distinguish.

Domoterm electric heated towel rail

Many manufacturers of design radiators even produce single-type models with a connection to hot water or to electricity. There are combined heated towel rails that can be connected to water or electricity, depending on the operating conditions.

Model Kelly Flat Electric, Cordivar manufacturer

Manufacturer: Grota.

Model Kelly Flat Electric, Cordivari manufacturer

Rating manufacturers of electrical heated towel rails for the bathroom

• Zehnder Group is a Swiss company, one of the European leaders in the production of radiators and similar techniques.
• Arbonia - Another world famous Swiss manufacturer, owning Arbonia and Kermi brands
• Cordivari is one of the most famous Italian brands engaged in the production of heated towel rails and radiators.
• Grota is a German company specializing in stainless steel products.
• Dvin - domestic manufacturers, produce a wide range of products, including a variety of design models.
• Zorg - Czech manufacturers with excellent reputation.
• "Terminus" is one of the leading Russian manufacturers of heated towel rails and design radiators. At the plant in Elektrostal near Moscow, about two hundred models from economy to the premium class are produced.
• "Argo" is a famous Russian manufacturer from Novosibirsk.
• "Sunners" is another well-known Russian company specializing in the production of stainless steel models.