Clear glue from the stickers can be even an economic soap or vinegar, but sometimes you have to use special chemistry. We tell how to make every means as efficient as possible.
The manufacturer must label its product, so there is a label on any new thing. Most often she is simply glued. It is assumed that the buyer will easily remove the label. However, an unpleasant sticky trail almost always remains. We will understand how to drop the glue from the stickers from different coatings and at the same time do not spoil them.
How to drop the traces of glue
Secrets of SuccessScrew tools
Special compositions
Work with plastic
Purification glass
Metal
Fabrics
3 Secrets of successful combating adhesive stain
- If after removing the marking, traces remained, remove them immediately. Negone to neglect this. On the remaining sticky mass, dust, villi, any other pollution, very quickly will stick. The result is a difficult mixture of glue and dirt. It is much more complicated to cope with it than with fresh stain.
- As a rule, the adhesive paste is very sensitive to the effects of heat. Therefore, to remove the label without effort and without spots, it is enough to warm it enough. The glue softens and easily go away from the coating. Important moment: it is impossible to overdo it. No need to take a powerful construction hairdryer, for example, for heating. It will spoil the base, especially if it is covered with paint or varnish. It is quite enough household device of average power.
- To remove the stain, a chemical means is most often used. It can spoil the surface. Therefore, before applying to the foundation, it is worth trying its impact on a small at least spare area. The easiest way to be mixed in a solution tampon or rags, to lose the base. If after a while no trouble happened, you can work with contamination. After sure to wash off the chemical soapy water.
Using sweater means
Excellent if the marking is easily separated from the base. But it happens not always. Most often, on the basis of the sticky mass remains to be removed. This can be done with the help of funds present in every home.Fat (oil)
Any oil is suitable: food or cosmetic. If they are not, Margarine is used, mayonnaise, etc. The essence of the technique is that fat dissolves the adhesive paste. It softens and easier removed. The selected agent is applied to the remnants of the adhesive, leave for 5-10 minutes. After that, gently cleaned the surface with a soft plastic spatula, an old plastic card, the like.
Alcohol
As an efficient solvent, alcohols and means containing them are used. The drug is wetting the rag, which rubbing the sticky trail. To facilitate the task, you can slightly hold the swamp in the pollution in solution. But only if the basis does not suffer. Similarly, a wet napkin works, in the composition of the impregnation of which there is a alcohol. True, it is very small there, so it will have to rub long.Acetic acid
Another solvent. You do not need a concentrated drug, a 9% solution is quite enough, which is known as a table vinegar. They are watched with a cotton disk or suitable cloth, impose it on a problem area for 10-12 minutes. After the foundation is purified and washed with clean water. This method is not always suitable for plastic, it can spoil.
Par
Such cleaning is very effective, but it is possible only for surfaces resistant to high temperatures. To create a pair, a steam generator is used if it is not, the iron is suitable with a sweeping function or a conventional boiling kettle.
Polaris PSS 7510K steam generator
Eraser or melamine sponge
Well rubs off the remnants of adhesive paste. To obtain a quick result, pollution is first soaked with soapy warm water, after 10-15 minutes, it is wiping with a rough cloth. After that, clutch eraser. Similarly, the melamine sponge is valid. It is a small abrasive. Therefore, it cannot be applied on the coatings that can be scratched. It is not recommended to use on the dishes and all objects in contact with food.
Sponge Melamine Paterra Extra Effect
We listed the most effective means. In addition to them, other drugs are used: various solvents, WD-40 liquid, kerosene, gasoline, lighter fluid. Sometimes the slice of lemon or dissolved in water citric acid is helped.
Rub the traces of professional compositions
Effective solvents for glue. Clean his traces from different surfaces. The preparations most often include natural ingredients. Due to this, they do not harm the grounds. Here are some such money:
- "Antiskotch". Universal composition. Removes the most persistent pollution from any surfaces.
- Fine glass. Preparation for glasses. In addition, well cleans ceramics, plastic and metal.
- Scotch Remover with citrus oils. Sheats any adhesive pastes, resins, tar.
- Liqui Moly. Universal preparation based on natural ingredients.
All these tools are effective and easily remove the remains of labels. Their main drawback is a high price.
Antiskotch / Antistirker Cleaner, 210 ml
175.
Buy
What to drop the glue from the sticker with plastic
Plastics differs significantly in its properties. But in any case, it does not always tolerate strong heating, sensitive to aggressive substances. Therefore, you need to choose a cleaning agent with these factors. A good result will give such techniques.
- Lost plastic with cashis from soda, water and several drops of any detergent gel. For a better result, you can leave the mixture on the coating for a while, then rub it again.
- Heat the sticker with a hairdryer. The device is included on the minimum power.
- Erase sticky composition with solvent, kerosene, alcohol or table vinegar.
If it is planned to use aggressive substances for cleaning, a trial processing of an invisible fragment is required.
How to wash glue from glass labels
Glass can not be damaged by high temperatures or aggressive chemistry. But under the influence of abrasives it scratches. Therefore, in order to quickly get rid of stains on the window, a mirror or dishes we advise to apply such techniques.
- Abundantly apply oil or other fat, then rub.
- Heat the surface with a hairdryer or pour it boiling water.
- Use solvent, vinegar or gasoline.
- Apply Cashitz from soap, water and soda.
The softened mass can not be removed by a sharp object. It is better to take a soft spatula, an old bank card, the like.
How to Clean Metal
Metal surfaces are resistant to high temperatures, chemicals, abrasives. The latter is only provided that the basis is not polished. This greatly facilitates the task than to drop the glue from the sticker from the metal. To remove sticky residues, any suitable items are used: a knife, a spatula, the like. It is desirable to dissolve or soften glue. For this take a solvent, gasoline, oil, soap water.
A good result gives preheating. Moreover, the metal will withstand even heat, so you can apply a construction hairdryer. True, set it up better for small power. Some difficulties occur when cleaning the refrigerator with a stainless steel coating. It does not tolerate abrasives, can spoil from unsuitable chemicals. Here is optimally used heating.
What to drop the traces from the fabric
After the labeling from clothes or furniture is removed, visually stains left. But a plot where the paper was lipnet. Here are some existing ways to get rid of the problem.
- Wash the thing. The adhesive composition will refill in the washing process.
- Wash the label with soap water, cutlery or alcohol. This can only be done after the preliminary test of the material.
- Heating of the problem area. It is stroked with an iron through a clean tissue.
In conclusion, we propose to watch a video where it is shown than laundering the glue from the sticker.
