We tell how to get rid of dust during repair and after it, as well as how to prevent its distribution.
After the end of the main work, the remnants of materials are folded into the garbage bags and bring out of the house. However, the apartment will still have dirt and the cleaning dust is needed after repair. How to do it, tell in the article.
All about construction dust
Causes of cleaningHow to prevent
How to remove it during repair
How to clean the dirt after it
Why dust need to clean
Easy suspension, which remains after repair, harmful to health and is very dangerous. When a man inhales her, she gets into the lungs. There she is placed on the mucous membrane of the bronchi. This can lead to serious inflammation or in general a violation of organs. No wonder there is a safety technique: during the repair it is necessary to wear a respirator that will not allow the penetration of particles into the lungs.
In addition, the suspension easily enters the eyes. It becomes the cause of serious irritation. And may cause diseases conjunctions. Therefore, in addition to the respirator, special glasses are recommended. Plus, do not forget about the ears: there are special protective headphones.
A variety of chemical components may be present in the composition of the suspension. Because of them, severe allergies can begin, the symptoms of which will be rash, various redness, runny nose or even asthma. To protect yourself from this, purchase special protective clothing in addition to the respirator, glasses and headphones. This usually closes most of the body.
From the listed facts we can conclude that the suspension is very dangerous. Therefore, it needs to beware not only during repairs, but after: the remaining particles will negatively affect the body. In connection with this, the premises must be carefully cleansed from dust.
How to prevent dust spread
1. Fence to repair
The platform on which work is made is important to separate from ready-made premises. Polyethylene is usually used for this. You can search in stores a special film with lightning: thanks to this convenient to enter the repaired zone. Also effective dense fabric. It must be wetted. It is necessary to take into account that you have to wet her constantly, otherwise it will start skipping suspension through yourself.2. Close the doors
If the work is carried out in the room where there is a door, be sure to close it. However, this is not enough. Take a wet fabric and plug all the slots. The fabric will not give dirt spreading around the apartment.
3. Enhance furniture and equipment
If you have to carry out work in the room where furniture and technique are, then you need to carefully hide them. Use a dense polyethylene film and wrap objects into several layers. You can close other surfaces that you do not plan to repair, for example, the floor.
How to get rid of construction dust during repair
1. Make cleaning during work
During repair work, it is better to remove mud clusters at once. Do this is the easiest way with the help of a building vacuum cleaner. As an extreme case, use models with inserting paper bags or with containers in which garbage is stuffed. Vacuum cleaners with woven bags will not fit: dust through them will stand out. However, if there is an opportunity, household models are better not to apply. Dust is too small, so it can score the device and spoil it.Building vacuum cleaner is not necessary to buy for repair. It can be rented for a while. Or take from acquaintances if they have it. Consider what is more profitable for you.
2. Cheat more often
With dirty work, for example, dismantling walls or their strokes, private people will definitely rise into the air. If you can eat more often, open the windows so that they go through them to the street. At the same time, the doors must necessarily be tightly closed and laid a wet rag.
If you cannot open the windows, use the usual water in a bottle with a spray gun. After completing the work, spray it in the air. Moisture will force a slightest to settle on the floor. Wait until this happens and only after that start cleaning.
3. Do not forget about cleaning between stages
Remember: Each new stage of repair should be started in the highest possible room. This rule will simplify the cleaning of surfaces after work. It will also save from the fall of extra garbage into the building mixtures.
You can use the already known method for cleaning dust: spray some water from the spray gun on the floor. Mud worsens, it will be easy to remove from surfaces. Do not use too much fluid, otherwise the flare will turn into ugly divorces.
How to remove dust after repair in the apartment
1. Comply with the correct order
So that cleaning passed faster and you did not have to repeat the same actions once again, follow the following sequence.
First you need to get rid of the garbage: put it in bags and put it on the garbage to a special container. If the materials remained too much, it is better to take care of the hiring of transport for the removal of garbage. Then proceed to clean the floor, walls and other surfaces. After wash the window. Last but, remove the dirt from the furniture.
2. Wash the surface
To remove dirt from the floor, use a wet broom. Such you will only separate it on the room. Collect a broom dust and pour out in advance harvested tanks: packages, bags, etc. Then throw away. Also suitable a mop with a removable sponge-sponge. This is well absorbed dirt. However, in the process of pointing the order, you will have to change several nozzles, and then throw them away.After you removed the main mud, rinse the floor with a solution of water and vinegar (on a bucket of clean water it costs one cup of 9% vinegar). This will help to avoid ugly divorces after cleaning.
With surfaces covered with plaster or paint, followed as follows. Wipe them with a wet sponge. You can use neutral detergents. For example, dishwashing liquid or soap solution.
If stains from the tape, glue or paint remained on the walls, then use special means, for example, White alcohol. It will easily delete the listed traces.
3. Use vacuum cleaner
After wet cleaning, walk along the surfaces of the vacuum cleaner. It is better to use construction. Clean the floor carefully. Then use a soft brush and remove the dirt from the plinths and walls. It should be brushed below up. This method of cleaning is suitable even for very demanding wallpaper, such as paper. For them, wet cleaning is not recommended.
