Painting, decoupage or wave - We tell me that it will help to remove small defects from the surface of the furniture or to fully update it.
If you have preserved ancient furniture, do not hurry to hand over to her old women or throw away. There are several ways to give her a new life.
1 lacquering
This is a classic way of restoration of old furniture. First, it is disassembled into composite parts, carefully wash and believes the old layer of varnish. After that, once again passed through hard-to-reach areas, clean the decorative elements and angles. After the furniture is checked for defects: deep scratches, chips, dents. They get rid of them and re-cover the surface with varnish.
This method is suitable for those subjects that are preserved in a fairly strong condition. Strongly damaged wood, wood can crumble when parsing and re-assembling. In addition, the coating of the lacquer will emphasize the texture of the tree. If it is in a deplorable state, it will look unattractive.
2 decoupage
This method is perfect for local furniture updates. For example, if there is one large scratch or loss on the retro-servant. Decoupage technique provides for the use of print from special napkins: they need to be applied to the surface and cut the right part. After that, the drawing must be pasted onto the surface and check with special glue for decoupage.
3 cracker
Or in a different way. This method of restoration is suitable for not a strongly damaged surface, on which the paint has shuffled or went the cracks of the lacquer. Serious chips and cracker scratches will not block.
The old coating should be removed, and instead, we apply a special crusture lacquer on the product. This is a single-component composition, which is harden as drying. The furniture restored by crabeller looks like the coating cracked from time to time.
4 Painting
Painting update is an easy way to restore, which is even a newcomer forces. It is suitable for a slightly damaged surface, which has already been painted or does not have a bright wood texture.
It is important to carefully remove the old layer, clean and align the surface. After processing the sandpaper, dust is erased and ground. After that, it is necessary to close all adjacent surfaces where the color is made. For example, the floor or the table on which the product is worth. If it is a chest of drawers or a cabinet, all boxes and additional parts need to be removed, the mirrors close or also dismantle. Then you can start painting. After the first layer of drying, the product is once again treated with sandpaper and re-covered with pigment. It is better to use oil paint to restore, but you can get along and water-emulsion.
5 Fiction
This is frequent and most successful way to update Soviet furniture. With it, you can hide small scratches on a wooden surface or as a whole to update and enrich the texture. One scratch is easy to remove with a stroke or wax pencil. If there are many small damage on the surface, it is better to use a special furniture wax.
6 Vinyl film
Furniture pasting vinyl film is the perfect way to restore objects located in rooms with high humidity, for example, in the kitchen. Before pasting, the surface must be carefully laundered, remove all small potholes and damage (this can be done using a special putty). After the product dries, you can stick the film.
7 Perettaking
This is a great way of restoration for that furniture, which has a well-maintained frame, but the upholstery is very damaged. It needs to be simply replaced by a new one. Choose such a fabric that corresponds to the total style of the product and the time of its manufacture.
