How to remove a mosquito net with a plastic window: 5 ways

We tell how to remove the frame, sliding, rolled mesh, the design without fasteners and with broken handles.

In the article, tell me how to remove the grid from the plastic window so as not to damage it. And also on what to do if the ears were crumbled - the holders in the form of a loop, for which it is convenient to pull out the design. First, give some tips that will simplify the process and make it safe.

How to remove the grid from the window:

Why do you need to remove the grid

General recommendations

Frame

• With pockets and z holders
• With hooks
• With plungers
• With flags

Sliding

Rolled

Without fasteners

With broken ears

Why fall mosquito in the fall

• In snowy weather, snow falls inside the cells. It can turn into frown, which breaks the cell.
• Under the weight of snow and hasty, the mosquito saves. This does not necessarily damage it, but the risk is. Strong wind also spoils the canvas.
• At low temperatures, the handle can crack and break. Dismantling the design will be more difficult.
• Birds can spoil the grid, they cling to it with sharp curls and unpack.
• For the summer, a lot of dust accumulates on it. Leave the window in this form simply ugly, and the dirt reduces the shelf life of the product. That is, dismantling is needed for cleaning the design and glass package.
• Through glass with a grid, much less of the world falls, and in the winter time and so does not indulge in sunny days.
• Snow and rains contribute to the appearance of rust on holders.
• If there is a warranty and it is damaged by frost or ice, it will not be free to repair it. Since the operating conditions are violated.

As you can see, spoil the product, leaving it on the window, very simple. Maybe it does not break completely, but the cells are deformed and insects, fluff, dust will fall into the apartment. Therefore, we still advise you to remove the mosquito net in the fall. Use instructions and videos from the article to do it quickly and correctly.

General Recommendations for Disassembly

• Remove the design into a windless, dry weather. The wind gust can snatch it from the hands - when the product is falling, it is most likely breaking. Well, the rain will just drip on you, which is unpleasant.
• Do not rely on the canvas, as it is not fixed so reliably to withstand the weight of a person.
• Ask someone to help you - to insulate. Some mosquitoes can be removed, just leaning out.
• Do not press the product too much - plastic parts fragile and easy to break them.
• After dismantling, wash and dry the design. Keep it in a dry, warm room - better in a horizontal position. Do not lean your other things to it not to damage the cells.

So, choosing a good day, you can proceed to dismantling. Its method depends on which the grid is installed and how it is attached to the frame.

How to remove the frame mesh

Frame in most cases can be pulled out from the inside. This is a rectangle with a plastic or metal profile, inside which anti-moskit protection is stretched. There are four types of fastening frames. Tell about each of them.

Pockets and Z-shaped holders

Remove such a grid easily, provided that the attachments are good. In this case, it is necessary to work in this order.

• Remove all things from the window sill - they will prevent you.
• Take the design for the ears and lift up - it should exit the lower brackets. As a rule, the ears are located in the middle.
• The bottom of the canvase is a bit away towards the street. Act carefully.
• Lower the cloth a bit down to free it from the top brackets.
• Turn the product so that it is free to pass into the window opening.

Ready. It remains only to put it in a room or a balcony, clean and find a place of storage.

Hooks

Sometimes instead of the usual holders on the profile hooks installed. They are attached to the self-tapping screw or screws.

• Loosen the hooks fastening.
• Expand them inside.
• Remove the mosquito from the window opening for the handle.

Plungers.

This mount is stronger than the rest. Pins with springs or plungers are inserted into the opening of the profile and fix the web on the frame. To dismantle it, you need to pull out the pins at the bottom of the profile first, and then in the top. Or use the second way.

• Rotate pins clockwise.
• Extract them from the frame.
• Turn the mosquito so that it enters the opening and put it in the room.

It is forbidden to rotate fasteners counterclockwise to avoid their breakdown.

Flag mounts

If a canvas with flags (lamb), it will take it a little more complicated, because the flags often bent not only from the inside, but also outside.

• Open the second sash to get to the flags.
• Turn them.

How to remove sliding construction

How to remove the grid from the plastic window from the inside if it is sliding? This design is attached using two guides for which it moves. To remove it, we do the same as with the frame.

• Free the windowsill from things so as not to drop them in the dismantling process.
• Lift the cloth.
• Free the videos and take the lower part to the side, from yourself.
• Lower a little down to pull out the product from the top rollers.

There are also pleated. They are more compact, convenient to use, removed according to the type of sliding.

How to remove roll

Rolled mosquitoes can not be removed for the winter, as they are easy to roll right on the window. But if there is a need to dismantle, it can be done as follows.

• Collect the product in the container.
• Remove it by twisting the screws to which it is attached.

This is a rather complicated process, as the design is attached outside at the very top. It is easier to wash it at the end of the summer with the help of a regular sponge.

Without fasteners

Such canvas are usually nailed on nails or screwed by self-tapping, so it will be necessary to dismantle nippers or screwdriver.

How to remove the mosquito net if the handles broke (ears)

The handles are damaged from rain and low temperatures, and in the heat dry and crack. Without them, remove the mosquito becomes problematic.

In a situation where the holders crumbled, do not try to dismantle the design without them. It may happen that you drop it and she will break. The role of the ears can perform conventional rings from the keys.

Instruction

• Remove the rings from the keys from the bundle and thread through the cloth in those places where the previous holders stood.
• Firmly grasp the rings and lift the mosquito.
• Take it a little toward the street, turn over and enter into the house.

In the same way, fishing hooks of large sizes, clips or steel wire can be used. You can easily cope with the work, applying these remedies as helpers.

Look at the video with a visual example of such dismantling.

If you later want to attach conventional holders, then here is the instruction.

How to install new holders

Necessary things

• Set of new handles (sold in a shopping store).
• Roller to install a rubber seal or screwdriver.
• Scissors or knife with rounded ends.

Installation Instructions

• Place the mosquito horizontally.
• With scissors or knives, it is very gently to get a sealing cord in those places where holders stood. It is not necessary to remove the entire seal.
• Clean the resulting hole from plastic residues.
• Put new holders.
• Roller or screwdriver construct rubber cord back.

Now you know how to remove the mosquito net with a plastic window. Sometimes it is believed to remove it for the winter at all. This is not true. Here are some arguments against.