Stretch ceiling is the best tool from flooding. If you flooded, all water will remain under the film. The only question is how to get rid of it.
How to drain the water from the stretch ceiling on their own
What you need to do first
Common mistakes
How to remove water from the stretch ceiling yourself
Cleaning and drying
The stretch ceiling is a film made of polyvinyl chloride (PVC), perfectly holding moisture. The material of thin, but elastic, so it does not break under load, but stretched, forming a convex tank hanging above the head. Baguette, holding the design on walls or overlap, is quite reliable in order not to allow the canvas to break. All elements are specifically designed to not give to occur by flooding under any circumstances. On the floor should not fall a single drop. It remains to solve the main task - if the neighbors happened from the top of the accident, how to return everything to the previous place in his apartment? After all, the draining of water from the stretch ceiling is a difficult task. Tell me in the article.
What you need to do first
Having discovered instead of the usual smooth surface, a slightly hanging giant bubble, it is necessary to urgently take action. First, it is not a fact that the installation work was carried out qualitatively. You can never exclude the possibility that the coating is rapping with all the consequences in the literal and figurative sense. Secondly, suspended structures often hide wiring and lighting devices. It is impossible to buy them in any way - it threatens at best short circuit.
Of course, first of all, it is necessary to call specialists from the firm that has completed the installation, but on holidays such a company is usually not working. The problem often has to be solved on its own. To avoid the emergence of additional difficulties, you should follow the following rules.
Sequencing
- If you started flooding, you should not immediately merge the contents of the tank. First of all, it is necessary to de-energize the entire wiring located on top. If this is not done, there is a chance to get a shock when touched to the wet canvase.
- It is important to contact neighbors from above. Perhaps they do not know that they can arrange a flood. One way or another, they must reveal and eliminate the cause of the leakage.
- Furniture and valuable things need to be taken out of the room - there are no guarantees that it will be safe to pull water from the stretch ceiling. What can be removed is needed to close with a polyethylene film. Perhaps there is a reason to try to protect the outdoor flooring as the same method, making the film on the walls.
When the problem is no longer threatened with big losses, it's time to work in search of tanks for a drain.
Common mistakes
Often, in such a situation there is an idea to stop the PVC film with a stick to distribute the mass throughout the perimeter. Logic is simple - if the bulk will be accumulated in the center, the gap will occur with a large probability. Here the main thing is not to rearrange and not press too much. The subject should not be too pointed in order not to break the coating.Sometimes tenants make the decision to do a hole for a drain. It is impossible to do this in any way. Even with insignificant damage, the film is immediately torn, and then the water will have to be retracted not from the ceiling, but from the floor. It should be released without breaking and punctures. Even a stretched canvas can still be used for its intended purpose, if it is properly drying and mounting strictly according to the technology, but it will not be able to sew it.
Problems arise when it fails to correctly calculate how much fluid is to be shown. As a result, it is necessary to remove it from the floor - the pelvis and the canister is missing, it is too late for them, and the flow is no longer stopped.
How to remove water from the stretch ceiling yourself
The choice of the optimal method depends on the features of the suspended design. Here are three options that differ in complexity, laboriousness and risk of a fatal error.
When there is a special valve
The canvas has a special valve in case of leakage. The algorithm is extremely simple. The hole opens, the capacity is substituted from below, then the other, and so until the incident is completely exhausted. Liquid can be customized to the valve, pressing on the film with hands or mop, but you need to act gently so as not to break it. It is able to withstand a large mass, but not cuts and punctures. Well, if your hand has a suitable diameter hose and a stepladder. Coating upon completion of work will have to be removed. It is necessary that it can again be tightened without wrinkles and sagging. In addition, he needs drying to avoid the appearance of mold and fungus.
When there are holes for lamps
On the surface there are holes for chandeliers and lamps. They are enclosed in a plastic framework, the so-called mounting rings that prevent the material that is sprawling. Turning off the electricity, the chandelier or lamp must be removed using the resulting hole as a drain valve. If there is a stock of the pelvis, buckets and canisters, work can be done immediately in several places.
So that everything goes successfully, you will need a minimum of two people. One should manage the jet if possible. The task of the second is to take out the filled containers.
If the lighting device is not attached to the wall or overlap with the rail or stand, the hole can be lifted so that the stream does not hurt at once. Then it is desirable to insert a hose in it - so it will be much easier to control the process. It should be clamped in the canvas, then omit, substituting the container. To interrupt the drainage process, the hose is enough just to overcene or cross. If the fluid accumulated below the ring, it will have to be omitted so that it can be free through it. In the presence of the pump and the hose it is better to use them together. In this case, all angles will be available.
When there are no holes
In the case when no holes are provided, it is possible to remove the water only through the edge, moving it away from the baguette. It is necessary to do it only on the one hand, and the less material will be released, the better. Fastening to the baguette there are three types:
- Capoon - film is made with a rigid bent edge inserting into a special groove in the frame profile, fixed around the perimeter of the room;
- Clip - the material is fastened with special clamps;
- The stroke - the vinyl is started in the profile and pressed the stroke tightly set on the baguette.
To figure out what kind it is used, you need to see the instruction that comes in a set with all the details. There is time for it, unless of course, the bubble above the head does not continue to grow rapidly. In general, polyvinyl chloride can withstand similar loads for how long, but should not be subject to this fact too long check.
The most common is the guy method. To remove the edge of the bands from the profile, a special rounded spatula is used, but a flat screwdriver is used in its absence. Clips are unfastened when pressed on them. The stroke is pulled out after removing the insert that performs the role of the plinth.
First you have to eliminate all obstacles in the form of a plinth and finishes. The edge must be pulled out very carefully, just a few centimeters, following it, so that it does not break out of the hands. Reload the liquid more convenient to the pump with the hose, but you can do without them. In this case, you will have to release a significant space to pull the edge and lower it down by making a fold for the formation of an directional narrow stream.
Cleaning and drying
How to drain the water from the stretch ceiling yourself - far from the most difficult question, if you compare it with problems that occur when repairing. After such conflicts, the canvas need cleaning and drying capable of delivering a lot of trouble. Wash vinyl it is impossible at temperatures above 60 OS - otherwise it will start melting. Apply only those detergents in which the content of aggressive substances does not exceed the permissible norm. Information should be present on the package or in the instructions.
Dry better by a technical hairdryer, but do not make the air too hot. If the fluid has not been stored for too long and there is no need for cleaning, the dryer is better to produce without removing the vinyl from the frame. The resulting holes are quite enough to evaporate moisture.
The coating is not always restored. If the heating pipe broke and hudded the hot stream, the material will be unusable, but the baguette can be left, saving money and time on installation.
The process of drainage in a small room is shown in the video.