Today the walls are painted even in the bathroom: there are many colors and moisture-resistant materials on sale. Let's talk about why it is so important to take out to pick up the desired shade for perfectly colored walls.
What do you understand under the paints?
So called paint samples. They are made on paper surface, cardboard, drywall, wood - on any surfaces. Sometimes it is taken to take out the manufacturer's company, which provide a small format sheets. But in most cases they have to do themselves, or with the help of designers, it depends on who you are working with.
This is how the examples of color from manufacturers look like. On such a small area it is really difficult to convey a real shade.
Why do you need to take out?
This issue is given newcomers - those who make repairs themselves. After all, there are examples from the paint manufacturer, the so-called veser, where the color is displayed in the form of squares indicating the series and numbers. It would seem - choose the color number on the "Vevey", give the jar to the tinting, take away, you paint - you get the result.
But in fact, everything is not so simple.
The color of the walls will differ from the directory presented. The final shade depends on what natural lighting in the apartment, on the temperature of artificial lamps, from the floor finish, ceiling, from the source surface.
And the tint will be much more saturated on the wall than on a cardboard sample. Some even claim that there is a universal recipe - take paint on the tone lighter to get the desired result. But, as we mentioned above - everything is not so simple.
Plus on paper and plasterboard
Alone and the same paint in different lighting
Alone and the same paint in different lighting
How to make scribes?
Experts recommend making papers attached to a sheet of plasterboard. The surface is required to be projected, and then apply paint. Do not limit yourself to one layer - overlap the paint until the option you enjoy. At the same time, it will be immediately clear how many layers will need, and it will be possible to approximately count the amount of paint.
Then install the sheets of HCL in the room - where you can spend the color. And look at them with different lighting, and even preferably weather.
A few more points you need to know
Why not do the walls on the wall? If it is already plastered and prepared for coloring - theoretically you can. But if you do several layers, the new paint may not block the old to the end.
If you have a painting wallpaper - the more not worth it. Too much layers will lead to the fact that the material will begin to peel the walls.
The exception is only cases when it is necessary to paint a relief surface - for example, brick. Then before applying paint to the wall of the wall, it is necessary to clean it efficiently, remove all the dust and coat with primer.
How wrapped around the repair?
The statement that it is cheap will be erroneous. The fact that the process will be expensive, depends on the type of paints. By the way, in expensive materials more often there are small "trial" banks of 50-100 ml. But budget brands of such things do not offer.
If the paint has to be poured, the banks are less than 1 liter, too, will not get it - in general, to make samples and the truth is a non-budding solution. But it will give the necessary result.
So, getting the necessary measure, if you want to achieve the desired color. It is better to make them on a sheet of plasterboard, pre-trunk. And do not rely on the manufacturers catalogs, if you do not want to make a mistake.