Ta yaya kuma yadda ake yanka plexiglas: 6 Kayan aikin da suka dace

Muna ba da labarin hanyoyin yankan gilashin acrylic tare da grinder, hacksaw, abun yanka da sauran na'urori.

Dole ne mai gida mai gida dole ne ya magance kayan daban-daban. Da kyau, lokacin da akwai kayan aikin musamman don sarrafa kowane. Amma ba koyaushe haka ya faru, ana amfani da tsarin duniya ba sau da yawa. Zamu tantance yadda ake yanka plexiglas a gida don samun cikakken yanke kuma ba su lalata kayan aikin.

Duk game da Yankunan Yaren Jiki

Fasali na kayan

Dokokin yankan

Kayan aiki don yankan kayan

- Hiwi

- Cutter

- askna

- askwo

- Bulgaria

- Wanna Nichrome

Fasali na kayan

Acrylic ana kiranta filastik. An samu ta hanyar hada methylachrylic acid tare da mahimmancin kayan haɗin da mai zuwa. Da aka sani a ƙarƙashin sunayen acrylic, plexiglass, plexiglass. Babu mara iyaka ga gilashi a cikin bayyananniya, amma yana da ƙananan nauyi. A lokacin da mai tsanani zuwa 90-100 ° C, kayan ya zama filastik. Ana iya lanted, don ba da madaidaicin siffar. Dole ne a la'akari da wannan dukiyar yayin aiki. Lokacin da ya yi zafi yana da sauƙi don lalata kayan aikin.

Narke acrylic fara a 160 ° C. Azzage kayan aiki na wutar lantarki yayin tsarin yankan yana mai zafi kuma yana hawan aikin. Zazzabi a maimakon sauri ya wuce wurin melting. Plexiglass ya narke, barbashin sa a kan yankan ƙulli, wanda ya sa ya zama da wuya a yi aiki. Saboda haka, yana da kyawawa don amfani da sanyaya. Don haka, a samarwa yana gudana ta hanyar yin jet na sanyi ko ruwa ana wadatar. Hanyar ƙarshe ana amfani da ita a cikin wurin aikin gida.

Dokokin yankan

Don sauri kuma a yanka daidai aikin kayan, kuna buƙatar aiwatar da dokoki da yawa. Suna "aiki" don yawancin kayan roba: Gilashin kwayoyin, polycarbonate da sauransu. Mun jera ainihin ka'idar yadda ake yanka a gida plexiglas 4 mm da wasu masu girma dabam.

• Yanke kai tsaye ko curvilinear yanke shi sauki idan daki-daki na rushewar. A saboda wannan, kafin aiki, yana da kadan. Ana amfani da Hadingster Gina mai zazzagewa azaman tushen zafi ko mai ƙona gas. Matsayi mai mahimmanci. Domin kada ya fitar da acrylic, ana kiyaye shi ta nesa daga kayan aiki mai ɗorewa.
• Don aiki, Zai fi kyau zaɓi COLL tare da Marking MP.S. Wannan ƙarfin ƙarfin ƙarfe mai ƙarfi ne.
• Yanke a cikin kowane kayan aikin wuta kawai akan ƙananan recs. In ba haka ba, gilashin acrylic za a mai zafi daga ruwa da narke. Saurin kowane tsararraki an zaba daban-daban.
• Yanke abu ba tare da kariya ta ido ba zai yiwu ba. Dole ne mu sanya abin rufe fuska ko tabarau na musamman. Lokacin aiki, an samar da ƙananan ƙananan ƙananan ƙananan ƙananan ƙananan ƙananan, wanda aka warwatse daga ƙarƙashin kumburin yankan.

Kayan aikin dace

Zaɓuɓɓuka fiye da yankan a gida plexiglas 2 mm da kauri, da yawa. Daban kuɗi muna bincika mafi inganci da sauƙi mai sauƙi.

1. Hoven

Hardness da rikitarwa na sarrafa plexiglass yana kama da behech. Ya isa kawai a yanka masu hacksaw ko kuma ikon yin aikin ƙarami ne, mai tsabtace gida wanda aka yi da yankan zane. Don aiki, da ruwa tare da ƙananan hakora akai-akai. Na farko, an sanya kayan aikin, ana yin slicer da yanke a kai. Mafi yawan lokuta daidai ne. Yanke cikakkun bayanai game da hacksaw yana da matukar wahala. Yi amfani yana da kyau don yin alkalami mai faɗi ko alama. Ya bar alamar alama. Zaku iya yi in ba haka ba. Karɓi layin tare da ƙusa mai kaifi ko wuka. Kuna buƙatar yanke hukunci a hankali, ba kyale mai ƙarfi dumama na ɓangaren. Don hana blade mai sanyawa, ana bada shawara a lokaci-lokaci sha ruwa yankan sashe tare da ruwan sanyi. Yanke daga hacksaw bai dace ba, yana buƙatar nika.

2. Cutter

Ya dace a gare su suyi amfani da adadi kaɗan na aiki, lokacin da aka ɗauki hoto da aka kauri bai wuce kilo 2-3 ba. Gina Shagunan sayar da na'urar yanke. Tare da shi, an yi yankan da madaidaiciya, curvilinear yana da wahalar yi. Kafin yankan, ana sanya kayan aikin. Sannan a matse layin ƙarfe zuwa layin da aka yi niyya. Tare da kokarin da za'ayi wani abun yanka a kan takardar. Yi sau da yawa saboda ya juya zurfin kusan rabin farantin. Sannan suka sanya shi a gefen tebur ko aikin aiki da kuma ainihin motsi ya hau gefen.

Yanki ya juya ba daidai ba, yana nika. A wasu halaye, da keɓaɓɓiyar abun ciki daga gidan ƙarfe ana amfani da shi. Theauki canvas, wani lokacin ma ko da amfani, a da'irar kaima, suna yin "spout" don sanya shi dacewa don yanke. Akwatin akasin haka zai zama mai amfani. An nannade tare da tef. Tsattsarkan abun ciki na gida. Suna aiki har da masu fashin kwamfuta.

3. askevik

Don aiki, kawai padzik ne kawai tare da adadin daidaitawa na revorutions an zaba. Zai fi kyau a ɗauki ruwan hoda na ƙarfe, idan ba zai yiwu ba, ƙyarkewar itacen ma sun dace. A lokaci guda, ya kamata su kasance tare da ƙananan hakora akai-akai. Yana yiwuwa a yi ba kawai yanke tsari kawai, amma kuma curvilinear. Gaskiya ne, ba zai zama mai sauƙi a yi ba. A kowane hali fara da alamomi.

A kwanon ya sanya layin yanke, sun haɗa da kayan aiki. Zabi mafi karancin juzu'i da mafi ƙarancin sauri. Suna ƙoƙarin motsawa a hankali saboda saw bai yi ɗumi ba. Tare da bayyanar alamun narke kayan, aikin ya tsaya, zuba ruwan sanyi a cikin yanke. Abu ne mai sauki ka lura da narke. Filastik a yankin ɓangaren ɓangaren ya zama fari fari, warin hayaki da halaye kamanci sun bayyana.

4. asker

Yin amfani da mai yanka, zaku iya yin ingancin yanke ingantaccen sassa, amma rukunin yankewa yana haifar da ƙarfi. Don yankan, ka zabi niƙa ka kauri tare da kauri ba na fiye da millerter. Wani debe ne mai ƙarfi lokacin aiki, tunda acrylic yana mai zafi. Ba tare da sanyaya ba, ba zai iya narke ba, amma kuma kumfa. Sabili da haka, yana da mahimmanci don kawo ruwa don sanyaya sashin yankan. Hanya mafi sauki don yin ruwan sanyi daga kwalbar filastik, a cikin kwalban filastik, a cikin bututun wanda aka saka tare da karamin bututun diamita. A cikin wannan hanya mai sauƙi, zaku iya cimma a ɓoye har ma da yanke.

5. Shin zai yiwu a yanke plexiglas tare da grinder

Masana sun ba da shawarar cewa kawai idan takardar mai ya isa. Kauri ya wuce 5 mm. Kusan an yanke shi madaidaiciya da grinder, curvilinear ba zai yiwu ba. A kayan aiki ya yanke sauri, gilashin acrylic bashi da lokaci zuwa sharar da narke da narke. Ba ya tsaya a wuyan kullen.

Don aiki, zaɓi diski akan manyan hakora uku suke. An yi niyya ne don sarrafa itace, amma kamawa da kyau tare da plexiglass.

6. Nichrome waya

Tare da shi, ana yin ta ta hanyar curvilinear a tsaye da madaidaiciya a kwance. Don yin wannan, kuna buƙatar tara na'urar gida. Nichrome zaren ya haɗu da tushen yanzu, ƙarfin lantarki - 24 aya aya 2 yana da kyau a yi amfani da mai riƙe da mai riƙe da shi don haka dating za'a iya gyara shi. Ana gyara waya a garesu don sanya zai yiwu a yanke mai abun yanka. Wasu lokuta zuwa saman ƙarshen haɗe rike zuwa ƙasa - nauyin. Irin wannan na'ura ta dace don yin yankan Curvilinear a tsaye, yanke hadaddun adadi.

Waɗannan ba duk zaɓuɓɓuka ba fiye da yankan plexiglass 5 mm (ko kauri). Zaka iya amfani da cutarwa gilashi. Fasaha ba ta bambanta da wanda ake amfani da gilashi. Ana amfani da alamar alama a kan takardar, mai yanke gilashi shine samun kudin shiga, to, gefen ba kawai. Abin takaici, ba koyaushe zai yiwu a yanke abu ba tare da kwakwalwan kwamfuta ba. Don haka ba su, a maimakon gilashin-yanke-gilashin suna ɗaukar siket na ɓoyewa, mai zafi da baƙin ƙarfe. Hau zuwa ganye har sai ya fara narke. Sannan dunƙule ya motsa a kan salama. Toure game da tsakiyar takardar kauri da aka shimfiɗa ta tsabtace.