Guest cottage, planned and calculated along with the master's house, can be said, lucky. If the main building, built in the first place, customers were survived independently, then the design of the auxiliary building was attracted by the same specialists that they were engaged in the design of both objects.
Customers (married couple with a small daughter) turned to the creative tandem of architects - Elena Burmistrova and Tatiana Osina - for professional help. It was required to design and build two objects at once - the main cottage, which was intended for the permanent residence of family members and had to have an impressive area, and a guest house, significantly inferior to him. It was assumed that the buildings would make an ensemble, and therefore will become as much as possible by architecture.
The task has simplified the single material construction of the walls, which has long visited customers, is a profiled glue bar. However, not only the walls were "common" for houses (in order to create a comfortable microclimate in buildings, and at the same time avoid excessive heating costs, they were erected from a bar with a cross section of 200 × 270 mm).
Photo: ideas of your home
The selection of the same type of foundation - monolithic reinforced concrete slabs on screw piles - was due to several reasons. Among them - the convenience of assembling the brusched walls on a flat monolithic plate, as well as the simplicity of the device of water warm floors (this heating system has become the main one) on a similar foundation. Finally, all the same desire to reduce operating costs predetermined the choice of windows - equipped with three-skimple glass frames of frames from the glass survey. Its products from it are characterized by higher energy-saving characteristics (it is considered that it is no less effective than a tree), durability, affordable price. In addition, the glass accommodation allows you to make the frames very thin, which increases the intensity of the insolation through the glazing elements.
The main cottage was in priority - it was erected, and was issued first, the hosts were engaged in their decoration.
But when there was a house of a guest house, it was decided to ask for help to the same creative tandem of architects. Customers needed budgetary, but high-quality and aesthetic solutions. In addition, the interior was to be harmonized with the architecture of the cottage. The optimal choice in such conditions was unobtrusive and at the same time natural style of chalet with elements of the French variety of country. A similar mix did not conflict with the brusade walls and brought into rooms intended for a short accommodation, homemade traits. Among other things, a moderate, characteristic of the French country, but noticeable decor (furniture on shards or, on the contrary, curved legs, the situation with wrought-iron parts) allowed delicately bypassing the decoration of wooden walls and revitalize monotonous surfaces.
For the living room zone, several lighting scenarios are provided. The overall illumination is provided by plaffones of directional light fixed on the beams. The soft group emphasizes two suspensions; Near the sofa there is a flooring and a table lamp
Facade design
Considering the features of the landscape (despite long-term large-scale construction, almost all high pines were able to save on the site, and coniferous trees were preserved on the neighboring puts, the brusched walls of both cottages were covered with light gray opaque paint. A cement-sand tile has been chosen as a roof covering a little longer than a dark shade. The thoroughness of the cottage gave a decorative trim of the base - a lining of dark gray, almost black stone with uneven edges. And if it were not for white window frames, then finishing materials, the tone of which is close to the color of the pine bark, almost completely "dissolved" the main and guest house in the landscape surroundings.The kitchen zone was hidden behind the stairs, which, however, did not affect its functionality. There is everything you need for cooking, as well as for receiving food by the company of four people
Planning solution
The list of volumes required in the guest cottage, the owners were together with the list of rooms for the main house. The basis of the guest building was to become a complex of premises, which have something or another attitude to the bath procedures. However, in the process of designing, priorities have changed, and under the bath complex, which includes a dressing room, shower, steaming, flue and bathroom, gave a smaller part of the first floor (total 34.5 m2). The best half ranked a spacious studio (38 m2), which serves as the kitchen, dining room and living room. In the warm time of the year, its metrarium increases almost twice due to the adjacent indoor terrace (30.5 m2). On the second floor of the cottage, the minimum of premises - from the staircase, you can go to the guest bedroom (15.6 m2) or a bathroom (4.5 m2).In addition to the aesthetics of the chalet and the French variety of country, an important contribution to the interior design was a slightly frosted Shebbi-Chic, synthesizing the elements of many architectural styles
Floor plan
Floor Explanation: 1. Hall 4.5 m² 2. Hall 7.5 m² 3. Studio 38 m² 4. Bathroom 1.8 m² 5. Dressing room 8.2 m² 6. Shower 12.3 m² 7. Steam 9.2 m² 8. Fire 3 m² 9. Looking for 1.4 m²
Plan of the second floor
Explition of the second floor: 1. Hall 10 m² 2. Bedroom 15.6 m² 3. Bathroom 4.5 m²
Technical data
The total area of the house is 116 m2 (excluding the Summer Room Square)Designs
Building type: Wooden based on profiled glue bar
Foundation: Monolithic reinforced concrete stove on screw piles, horizontal waterproofing - waterproofing membrane, insulation - polystyrene foam (thickness 200 mm)
Outdoor Walls: Profiled Cooling Bar Section 200 × 270 mm, Outdoor Decoration - Paint
Interior walls: framework
Roof: Scope, Stroke-cutting design, Wooden rafters, Variazolation film, insulation - mineral wool (thickness 200 mm), waterproofing - waterproofing membrane, roof - cement-sand tile
Windows: glass-surcharge, with two-chamber double-glazed windows
Life support systems
Water supply: centralizedSewerage: centralized
Power Supply: Municipal Network
Heating: Liquid condensation boiler (main house), water warm floor with ethylene glycol as coolant, convectors
Interior decoration
Walls: Brusade imitation, lesing water-based impregnation, wallpaper, ceramic tile
Floors: Parquet Board, Ceramic Tile
Ceilings: Evrovagonka (Pine), Limiting impregnation on water based
We have implemented several "urban" solutions that have allowed to do without the usual decoration of brusched walls. In the kitchen zone and in the bathrooms, the lower part of the walls were tested with ceramic tiles with "handicraft" or the English plot, the staircases were separated by the same material. Wallpapers were used for design walls. In combination with a coarse bar, their plots toile de jouy look even more tender. Another way to bring a variety of monotonous wooden walls is to apply a variety of decor elements: mirrors in unusually ornamented frames, tables for one candlestick or bust, tapestries, watercolors.
Elena Burmistrova, Tatyana Osin
Architects, project authors
On the modeling terrace reported with the studio, the place of rest is equipped. Behind the brick wall is hidden a bake barbecue, an open area is organized by a lounge area with a sofa, chairs, a table.
The curtain design of the design is identical to decorative elements on symmetrically located cabinets. This technique managed to implement, since most of the furniture was made to order, according to the authors' drawings
The staircase hides the sacrifice of an incomplete height, which is due to the need to insulate the structure leading to the second floor, and the desire to hide it from the living room in the zone.
An unusual decorative technique - from the side of the living room area, in the upper part of the simpleness, a number of different-dimensional rectangular mirrors are placed. They reflect natural and artificial light, denoting the location of the TV and the entrance to a small technical room.
The cottage is not designed for a long-term accommodation of the same guest, and places for storing things in it are a bit - one closet in the hallway and bedroom
Stacking ceramic tiles by preparing the brusal walls: mounted a metal frame on which the foundation was fixed - Leists G Clac
Employment calculation of the cost of the house of the house with a total area of 116 m², similarly represented by *
Name of works | Number of | Cost, rub. |
Preparatory and Foundation Works | ||
Marking axes in accordance with the project, layout, development, recess and backflow of the soil | set | 105 300. |
Sand base device under the foundation | set | 21 600. |
Device of a monolithic reinforced concrete slab foundation with viscous reinforcement meshes of frames and device formwork devices with viscous reinforcement grids, frameworks and formwork devices | set | 97 200. |
Waterproofing foundation | set | 10 00. |
Other works | set | 13 900. |
TOTAL | 292,000 | |
Applied materials on the section | ||
Sand for construction work | set | 23 900. |
Mortar concrete, piles screw, fittings | set | 169 250. |
Polystyrene foam (200 mm) | set | 75 600. |
Waterproofing membrane | set | 27,000 |
Other materials | set | 14,900 |
TOTAL | 310 450. | |
Walls, partitions, overlap, roofing | ||
Build house from a profiled timber, painting | set | 394,000 |
The device of the pitched roof from cement-sand tile | set | 400 600. |
Installing window and door blocks | set | 228,000 |
Other works | set | 51 150. |
TOTAL | 1,073 750. | |
Applied materials on the section | ||
Profiled glue timing segment 200 × 270 mm, water-based paint | set | 591 000 |
Vaporizolation film, mineral wool thickness 200 mm thick, waterproofing membrane, cement-sand tile | set | 459 800. |
Glass-pool windows, doors | set | 840,000 |
Other materials | set | 94 550. |
TOTAL | 1 985 350. | |
Engineering systems | ||
Electric installation work | set | 68 300. |
Installation of the heating system | set | 89 900. |
Plumbing work | set | 64 200. |
TOTAL | 222 300. | |
Applied materials on the section | ||
Materials for electrical work and installation of the lighting system | set | 91 550. |
Equipment and materials for installation of water supply and sewage systems | set | 170 450. |
Set of equipment and materials for mounting the heating system (liquid-fuel condensation boiler, water warm floor with ethylene glycol as a coolant, convectors) | set | 386 500. |
TOTAL | 648 500. | |
FINISHING WORK | ||
Device flooring from parquet board and ceramic tiles; Facing walls with panels and ceramic tiles, decoration of the ceilings by eurvagon; Wallpaper sticking, painting and other work | set | 367 150. |
TOTAL | 367 150. | |
Applied materials on the section | ||
Brusade imitation, lesing water-based impregnation, wallpapers, ceramic tiles, parquet board, Eurovantia (Pine), other consumables | set | 584 650. |
TOTAL | 584 650. | |
TOTAL | 5 484 150. | |
* Calculation is carried out without accounting of overhead, transport and other expenses, as well as profit of the company. |