The solution of the household soap, the infusion of garlic and copper sipop - we tell, with the help of which funds you can wash and displaced the surface of the greenhouse from polycarbonate.
The greenhouse is almost every gardener. In it, the plants germinate and ripen faster than in the open soil. And, as a rule, it is possible to plant them much earlier. All this is achieved due to a special microclimate and additional humidity. However, such a medium also love various bacteria and microorganisms. If they do not fight with them, pests and diseases will quickly spread in the greenhouse. Typically, the room is washed in autumn and spring. At the end of the season, harvests and remnants of plants are cleaned, and then disinfection. At the beginning of the season, when the temperature on the street reaches 0 ° C, it also costs to carry out processing. We tell how to wash inside the greenhouse from the polycarbonate in the spring, as well as what means will help to hold disinfection.
All about greenhouse processing in spring
PreparationCleaning
Than you can wash the greenhouse
How to disinfect it
Preparatory stage
Before you wash the greenhouse from the spring polycarbonate from the inside, it is necessary to bring order in it. Usually do it at the beginning of the season, when a couple of months left before the landing work. First of all, you can curb the room. To do this, wait for frosts and leave the doors and framugues open. Bacteria, microorganisms and larvae, which could be divorced into crude warm weather inside the greenhouse, die in the cold. After that, it is necessary to decompose on the ground in the greenhouse layer of snow, so that the Earth has a useful soft moisture.
At the next stage of training from the outdoor, they remove the remaining deposit. This process is simple: it is necessary to simply open the doors so that warm air gets inside. The indoor temperature is equal to the temperature outside, and the ice particles will come on their own. Score ice is mechanically not recommended, since it is easy to damage the protective UV coating.
These actions will help increase the yield of future landing. However, the stage is optional, and if you missed it, then nothing terrible will happen.
Stage cleaning
After the preparatory stage, it is necessary to take care of cleaning. To begin with, it is worth out of the greenhouse the remaining weeds and old Bottva. They are placed in a compost pit or burned in a special barrel. Burn grass on Earth is impossible, it is very dangerous. Also, the outside is carried out all that was stored in winter inside. For example, boxes for seedling, various inventory, sticks and other things. After cleaning the tracks.
Metal parts of the greenhouse need to be inspected and check whether rust has been formed on them. If so, it costs to get rid of it, as well as process the metal so that it does not oxidize even more. Usually helps paint. It is also very important to check the greenhouse material: whether polycarbonate was damaged in any places. If you found cracks, it is important to repair them.
After you have aroused the order, you can proceed to washing polycarbonate. It is important to wait until 5-10 ° C is installed on the street. It is better to proceed to cleaning in warm dry weather.
Wash is necessary to remove the dirt from the walls from the wall. If dust remains on the surface, then about 30-50% of light will not penetrate the transparent material. This will significantly affect the yield. First you should wash the walls of the greenhouse outside. This can be done by any detergent.
Cleaning, as well as the processing of greenhouse from polycarbonate in spring, it is necessary to spend very carefully. It is recommended to use only soft materials, such as sponges and rags from microfiber. If you need a brush, select the model with soft bristles. The material is easy to scratch. And due to scratches, cracks may appear, which will affect the tightness of the greenhouse. Also should not use a strong water pressure.
Than to wash the greenhouse after winter
1. Economic soap
For cleaning, you can use the solution of the economic soap. It effectively launders the surface and does not harm nature. To create a solution, you will need the usual slicing soap. It must be grate and add to warm water. Then stir and beat a little before the appearance of soap foam on the surface.
It is worth taking a soft sponge, apply a solution on polycarbonate and design. Then you can use the windows scraper, which will easily be unnecessary moisture. After the remedy wash off with water.
2. Special detergent
In stores for the garden and garden, you can find chemical detergents that are specifically designed for washing greenhouses. They effectively remove dirt. However, they can not be washed off with water after applying. You must carefully remove them with a sponge or cloth. If you wash them, the harmful substances will fall into the ground. This may adversely affect seedlings.3. Mustard
Another popular cleaning agent is the usual mustard powder. Take a wet sponge. Then swing it in mustard and soda the surface of the greenhouse. After you proceed all the walls, wash the composition of water. It is safe for plants and soil, as the mustard is a natural agent.
4. Summer alcohol
You can remove dirt with the help of ammonia alcohol divorced in water. Prepare a mixture: add one tablespoon of alcohol for ten liters of pure water. Mix well and process the walls. After that, leave fraumuga and doors open to dry the surfaces completely dry.
Disinfection Stage: How to treat a greenhouse from polycarbonate in spring
Cleaning and washing of walls helps only remove the dirt that accumulated over the winter, but it does not replace the spring processing of the greenhouse from polycarbonate. Often, disinfection is also carried out in the fall, but some bacteria are able to survive frosts. Therefore, for additional safety, the procedure is also at the beginning of the garden season.To displaced the walls using various means. They are divided into chemical and biological. For those and other compositions there are advantages and disadvantages. For example, chemicals act faster, and also considered more efficient, but they are able to harm the microflora. Biological compositions, on the contrary, are not able to harm nature, but there are much slower than chemicals.
1. Chlorine lime
This means refers to chemical compositions. It is capable of fighting and destroying fungal and bacterial diseases. For the preparation of the solution, the following proportions are used: for ten liters of pure water take about 400 g of chlorine lime. Mix ingredients and insist about 4 hours. Then the mixture is poured into the sprayer and processed the surface of the greenhouse. Close the doors and windows and leave for two days, after the expiration of this time the room is well ventilated.
During the procedure it is necessary to be very neat and follow the safety technique: be sure to wear a respirator, safety glasses and gloves.
2. Copper KUPP
Another chemical composition, with the help of which is struggling with phytoofluoro, gray rot and other common diseases. For the solution take 50 g of the means, dissolve it in a small amount of warm water. Then add ten more liters of fluid and leave for an hour. The drug is treated with a greenhouse. The tool will be for two weeks.3. sulfur
With the help of a dipraying with a sulfur checker, you can destroy bacterial infections, remove mold and fungus, and get rid of different insects. You will need a checker of 500 g. It is usually designed for a room of 10 m3. Inside closed all doors and windows. Checker must be placed on a metal sheet. In no case should it stand next to easily flammable designs. Be sure to retreat about half a meter from them.
You need to light the checker. One person must be inside the greenhouse. Be sure to wear protection: respirator, glasses, gloves. At the same time, the second person is outside and controls the situation from the street. When the wick lights up, the premises need to urgently leave and close the door well. Carry the greenhouse usually after two or five days. And work can be started only in fourteen days.
However, it is necessary to know that this method has a large number of flaws. Sulfuric anhydride always falls into the ground, as well as in the plants that will grow on it. It is able to affect the destruction of metal structures. It should not be used from phytoophulas and a false mild race, he will not help them cope with them.
4. Needa
From the needles can be prepared solution. This remedy refers to biological, so does not harm nature. Usually pine branches are poured with water (take approximately half of the bucket). Then they boil it within twenty minutes. It is possible to water the ground with a solution, as well as washing the surface of the greenhouse.5. garlic
From garlic make infusion. It will take 40 g of garlic for him. It needs to be crushed: cut or skip through the garber. Next add it to ten liters of water and leave for one day. The walls and designs wash the walls.
6. Pine extract
Pine extract is sold in a pharmacy. To prepare a solution, you will need 200 g. It is added to cold water, then the liquid is wiped with all structures inside, as well as polycarbonate walls.7. Network
From nettle, too, make biological infusion. Take dry nettle (you need half ancara), then poured just a boiled water. Leave broke the water until the water cools. As soon as it becomes cold, it is necessary to strain the solution through a sieve to get rid of large particles of the plant. Then handle the surface of the greenhouse from the inside.
