We tell how to repair the roof and eliminate a small leak through the self-adhesive sealant.
Which of us did not come across such trouble, as leaks of flat and pitched roofs? Even minor leaks lead to the wetting of thermal insulation and the subsequent destruction of the structures of the roof. Not to mention the appearance of divorces on the ceilings and walls, the development of fungus and violation of the temperature and humid regime in the room.
Photo: Tehtonol
Photo: Tehtonol
Photo: Tehtonol
Repair the roof and eliminate a small leakage will help universally self-adhesive tape-sealant Nicoband. It is a bitumen-polymeric sealing material with a thickness of 1.5 mm, topped with a color aluminum film that protects the tape from the effects of UV radiation, gives the framework and allows you to hardly fasten the sealing elements. The bottom of the tape is covered with an easily graded protective film.
Photo: Tehtonol
Required tool
For laying Nicoband you will need a tool that will be found in every farm - this is a roulette, a marker, a knife and a roller for a cursory, or something replacing it, gloves and a small segment of the fabric.
Photo: Tehtonol
Preparation of the surface and laying
Before the fitted material, the surface must be cleaned and degreased. The surface temperature and material must be at least +5 ° C. Measure and cut the required amount of material. For more reliable sealing of the tape, it must overlap the hole by 3-5 cm from each edge depending on the damage value.
Remove the protective film and attach the Nicoband tape to the surface, then hurt much.
Photo: Tehtonol
Photo: Tehtonol
Photo: Tehtonol
Photo: Tehtonol
Attention! Do not use the ribbon on wet surfaces. The surface should be dry and clean, otherwise it is impossible to guarantee the reliable gluing of the Nicoband tape.
Removal of damage on the roof
The self-adhesive tape Nicoband is suitable for repairing any roof of flexible and natural tile, metal tiles, slate, rolled materials, as well as a folding roof.
For reliable fixation to the surface, do not forget to press the ribbon roller for the cursory or highly press the hand over the entire surface.
Photo: Tehtonol
Photo: Tehtonol
Photo: Tehtonol
Photo: Tehtonol
High adhesion
The self-adhesive tape-sealant Nicoband is perfectly glued to various materials, providing reliable sealing.
Photo: Tehtonol
Attention! It is not recommended to apply a tape on hot vertical surfaces (with a temperature above +80 ° C).
Nicoband will help each owner to solve current affairs quickly and easily. Minimum labor cost - maximum efficiency and reliability! For such a variety of applications, the tape produce various colors and sizes, which makes it easy to choose the necessary type of self-adhesive sealing tape.
Photo: Tehtonol
Photo: Tehtonol
Photo: Tehtonol
Nicoband is produced five colors: silver, red, green, brown, gray.
Photo: Tehtonol
Size range:
Photo: Tehtonol