We are talking about the types of basics, sizes, the washes keys and other indicators to select high-quality installation for the toilet.
Plumbing suspended type wins at a standard counterpart. It saves a place indoors. The lack of support on the floor, around which dirt accumulates, facilitates cleaning. Yes, and the device soaring in the air is much more attractive. The only complexity with which the future owner faces is the right installation. Tell how to choose installation for suspension toilet. Without this, high-quality installation is impossible.
All about choosing installation for suspension toilet
Criterias of choice- Basic type
- Compatibility with plumbing
- Design sizes
- Washed key
- Additional functions
Mini-rating of reference frames
Selection of installation for toilet
Installation is a support system on which a plumbing device is fixed. This is a mechanical design with movable elements made of metal, rubber, plastic, etc. It depends on its reliability, as long as the plumbing will last. We will analyze important selection criteria.
1. Type of Rama
There are two types of devices that differ in technical characteristics and installation features.Hinged or block model
This installation console, the water tank is fixed on it and all the necessary strapping. The compact system is designed for mounting only on the capital wall. It is placed in an existing or pre-prepared niche, connects to the plumbing. After installation, it closes the decorative panel or is meditated. A simple and reliable model, but to use it for partitions is prohibited.
Toilet with the installation of hanging IDEAL STANDARD CONNECT
Frame Installation
A universal version consisting of a metal frame with reinforcement on which the equipment is attached. The frame makes it possible to put a suspended plumber anywhere that you can pave engineering communications. It can be a wall under the window, partition, angle, etc. When choosing a frame, it is important to correctly determine the reliability of the base and choose the fastening type suitable for it. There may be three of them.
- Floor. Support system falls on reinforced legs. Used for fragility of drywall, foam blocks, etc.
- Wall. The frame is fixed on the wall, all the mass of equipment falls on it.
- Combined. The mount is made in four points in horizontal and vertical planes.
For the framework of all types, adjustable legs are provided. Therefore, it is possible to choose any height from the floor to the seating. There are linear, double-sided, angular modifications, as well as frames intended for installation under the window. During the installation of any model, you can make an additional shelf or niche. The price of frame systems is higher than blocks.
Unitaze with the installation of the suspension Roca
2. Compatibility with a plumbing device
The mid-scene distance of the toilet bowl must coincide with the corresponding frame elements. There are only two options: 0.18 and 0.23 m. And the first most common. The second is very rare. However, you need to make sure of the compatibility of the selected equipment.
Pay attention to the tank. The volume should be misunderstood. Super thin frames cannot accommodate a large capacity. As a result, the amount of water decreases, it may not be enough. For suspended systems, plastic tanks make. It is necessary to make sure that the material is high quality, and the product is solid. There are still prefabricated tanks, due to the presence of seams, their life is less.
Unitaze with the installation of suspended GROHE
3. Product size
The dimensions are important, especially if the place is already chosen. Different types of systems are distinguished by their size. Thus, standard attachments have a height of 1 m, a width of 0.5 m, a depth of 0.1-0.15 m. Frames larger: height from 0.8 to 1.4 m, width 0.5-0.6 m, depth From 0.15 to 0.3 m. All major manufacturers produce non-standard modifications intended for certain conditions. So, on sale you can find angular and low frames. The latter are set under the window or low partitions. They necessarily present an additional option that allows you to place the flushing button not only frontally, but also on top of the frame plane to be convenient to use. Compact equipment is performed for saving free space. Its depth is only 0.8-0.1 m. Options, which is better to choose a multi-installation toilet with installation. For each case, you can choose your solution.
4. Wash button
Choose a wash key is not difficult. First define the type of mechanism.Type of mechanism
- With mechanical drive. Functions similarly to a standard toilet tank, where the pusher through the gear system activates the descent of water. The node is extremely simple, but it is very reliable.
- With pneumatic drive. Activation of fluid reset occurs by compressed air. It is displaced from a small tank, moving along a flexible tube. Pneumuzles can be located at a distance of up to 250 cm from plumbing.
- Electronics with infrared sensor. The automation starts when the detector is triggered to touch the panel or the movement of the person at the exit. Comfortable, but he is the most expensive option.
The flushed key can go buckled with a frame. It will be a standard element without special delights. It is usually white or chrome. You can select the key separately. In this case, the button will be with an attractive design. It is important that it is compatible with the main panel. There are sensory and anti-vandal among the keys. The latter are most likely for common areas.
Toilet with the installation of suspended SanTek neo
Washed mode
When choosing a key, pay attention to the flush mode.- Wash-stop. The flow of water stops when the button is pressed.
- Double. The user can choose either a complete draining of the tank, or economical when half the tank is spent.
Relatively recently appeared frames that are mounted fluttered with facing. This makes it possible to install the panel for the key on the same level with the rest of the trim. You need to know that through the hole in the shrink panel is accessed by the tank mechanism. If there is a need, it can be repaired or replaced. Therefore, it is necessary to ensure that the dimensions of the technological opening correspond to the dimensions of the mechanism.
5. Additional features
A good bonus to the frame will be an additional functionality that makes the use of equipment comfortable. So, a magnetic frame has been developed for the shrink buttons panel. It provides access to the inside of the structure. It houses a small container, where tablets are laid for disinfection of water in the tank. The presence of a magnetic latch makes access to the container.
Unitaze with the installation of suspended CERSANIT DELFI + BLACK
Another functional addition - air purification. It is implemented in different ways. The easiest is the lead from the washed knee of the installation system of the additional nozzle. It is summed up and connected to the overall ventilation system. More complicated, but the effective solution is to connect forced ventilation through the drain hole.
For this, the frame is additionally completed with a small exhaust fan, coal filter and controller. When the sensor is triggered, the controller starts the fan, which sues polluted air and brings it to the filter. The stream passed through the filter is cleared and fed into the room.
Rating of the best installations for suspended toilets
- Geberit Duofix Delta. Standard self-supporting design with powder spraying. Adjustable legs, range from 0 to 0.2 m. Condensate protected by 0.12 m thick with eyeliner from above and rear.
- Cersanit Link Pro. Sold bundled with a CARINA Cleanon boosodal appliance and a blick brand gloss fabric. Tank with mechanical drain, connecting side and rear.
- Cersanit Vector. Compact design with a width of 0.39 m with height-adjustable legs. Comes complete with a cup of DELFI model. Tank with mechanical wash. There are two keys on the panel, there is a water saving mode.
We list and manufacturers producing high-quality and durable products.
Geberit.
Famous Swiss brand producing plumbing equipment. Its products are always present in the ranking of the top 10 of the best installations for the toilet. It has an extensive network of service centers, where you can buy an original spare part, invite a repair specialist. For the manufacture of products, the company uses steel, covered outside and inside with an anti-corrosion coating, chrome-plated stainless steel.
Geberit Duofix Frame Install
Internal installation tanks are only solid, combined with a nozzle. This minimizes the risk of leakage. All elements of the washed mechanism coming into contact with moisture are made of non-corrosion materials. Noise insulation is used for the reservoir, the valves work silently.Tece.
The German firm is known for the reliability of products. For the manufacture uses galvanized steel with high-quality spraying. Besides it, the plastic of increased wear resistance and strength is applied. Test equipment is durable, in many respects surpasses in this competitors. Released in a variety of design: from classics to high-tech. Choosing which installation for the toilet is better, often prefer it.
Headfire Installation Tece.
Cersanit.
Polish brand enters the top of the best manufacturers. Releases high-quality plumbing, the price of which is low. This is due to smaller, compared with Western European companies, logistic expenses, but not bad performance characteristics. CERSANIT products are reliable, durable, functional. Its assortment is diverse and constantly replenished. If necessary, you can take the equipment with a set or separately.
Toilet with the installation of suspended CERSANIT DELFI + Vector
Suspended plumbing fit well into any interiors. It should be remembered that the mounting of such devices will require a support frame, without which the installation is not possible. It is not worth saving on it. It should be assembled from high-quality materials, only then will last long.
