Under the conditions of a sudden turning off the water, accumulative and low-power flow water heaters will fit. Touch how to determine the choice.
Many water heaters differ in economy, reliability, security - in a word, everyone is good, but they will not work quickly. Gas columns, for example, require coordination, and in some cases modernization of the room - the matter is not enough. Flowing water heaters consume a large amount of electricity that is not always enough. What option can be used quickly and without unnecessary trouble? Most often, if necessary, urgent installation and connections are chosen by low-power flow water heaters or compact accumulative (we will only go about electrical models, gas, as already mentioned above, quickly connect, most likely it will not work).
Flowing water heaters
You should choose those on which the power of your power grid. Calculating connection power can be found in the company responsible for the operation of your housing. As a rule, in urban apartments without electric stake, you can easily connect a flow water heater with a capacity of 3.5-4.5 kW, in houses with electric stoves - up to 5-8 kW. Outside the city, the situation may be different. In the old villages and country villages there may be outdated electrical stations, which cannot be connected with a capacity of more than 2.5-3.5 kW (in such a situation, it is better to abandon it). In the new villages, the consumption of electricity consumption on the household can be significantly higher, up to 15-20 kW, in such a situation there can be connected without problems.
Comparatively low-power models with a capacity of up to 3-3.5 kW are connected very simply as conventional electrical appliances - in a standard power outlet 220 V. Of course, you will not get a lot of hot water with their help, you don't accept the bath and shower. Therefore, the cup of all is used in the kitchen. Fortunately, these compact devices require very little free space (much less than any boiler).
Flowing water heater Timberk
On sale there are models installed both under the sink, and on top, over washing - choose a modification that you like more. There are completely compact models made in the form of nozzles on the crane.
More powerful flowing water heaters require separate wiring, just like an electric stove or washing machine. This separate branch needs to be equipped with a Uzo, protecting users from electric leakage. Electrical specialist should be engaged in connecting such water heaters.
Cumulative (boilers)
The main problem of boilers are their overall dimensions, which in the case of a capacity of 80-100 liters will be very impressive. Determine in advance where you can place a boiler - taking into account the PUE rules (it is impossible, for example, placing electrical appliances over the bathroom, sink, shower, shower or toilet; distance from the bath, washing, shower, or toilet to the water heater should be at least 1 m to The user, being in that bath, could not reach the electrical appliance).
ELECTROLUX EWH 50 Formax DL Cumulative Water Heater
A good place for the boiler is considered space in the bathroom above the door. There is usually enough space to accommodate even 100 liter tanks. For convenience, manufacturers specifically produce water heaters that are designed for horizontal installation.
Do not forget that the accumulative water heater in water filled with water will be very heavy and not all the wall will endure it.
As for protection against scale, here you do not need special delights, if you are going to use a boiler for just a few days a year. Even standard protection (magnesium anode) is enough for many years of operation in this mode.
