Carved platbands on the windows in a wooden house: maternitym and install do it yourself

To decorate the wooden house will help carved platbands on the windows. We tell how to make them yourself.

Create carved wooden platbands on the windows:

How to choose the style of carved platbands on the windows

Types of thread

Wood selection: what to pay attention to

Tools for work

Stencils and templates for crossbar

How to make a cash independently

Tubes on the windows in a wooden house are performed not only by decorative function. They also cover the gap between the window box and the wall, thus protecting the house from the penetration of moisture, wind and cold. In addition, they reduce the level of external noise and heat loss.

It is believed that the flourishing of the wood thread, and at the same time the traditions of making such elements of the window decor, came to the second half of the nineteenth century. However, the history of this decorative element is rooted in a distant past.

Styles of carved platbands on the windows in a wooden house

Before starting the manufacture of a business, it is worth deciding on its style. If you have several buildings on the site, the same design of windows will help externally create a single architectural ensemble.

Special attention when installing platbands should be given its combination with the window. Standard plastic glass windows will look good only if white color is present in the elements of the decor of the external design. Otherwise dissonance between the texture of the tree and plastic can not be avoided. It is better to give preference to wooden double-glazed windows or plastic laminated under the tree.

When choosing a lambrequin pattern, it is possible to inspire the cultural traditions of wooden architecture: the Slavs cut out stylized mythical creatures, Beregin, symbols of the sun, earth and water, as well as various animals. The images were not accidental, it was believed that they defend the house from evil people and spirits.

In each region, there were its own features of the design of windows: the subcarms of the Novgorod region differed from the same elements of the Krasnodar Territory. So you can emphasize the cultural traditions of the region in which you live.

If such a concept is not close to you, look at relevant floral ornaments and geometric patterns.

Types of wood thread

• Deaf or flat. The drawing does not contain slots on the background, and the pattern itself lies in the same plane. This also includes a relief thread, the pattern on which is made in the form of a bas-relief. This type of thread is the most difficult, it requires an idea of ​​the presentation and scale.
• Through or propyl. Openwork thread, made by pass-through propyl, the picture does not have a background. This is the most popular design. The complexity of the pattern depends on the level of the author's skill.
• Overhead. Separately cut parts of the composition are glued to the contrasting background.

Deaf thread is performed by a chisel without penetrating the tool through.

Through thread is performed without a background, the pattern is muted through.

Overhead thread: an ornament with a slotted background is pasted on the surface of the product.

It must be said, the models in which several types of thread are combined are more spectachable. However, much depends on the experience of the master. If it is not, but the desire to make wooden platbands on the windows with your own hands is available, pay attention to simpler products, for example, through the geometric pattern.

Wood and work tools

One of the key points is the choice of material. Different breeds are used for threads, they differ not only with adhesiveness, but also soft, density, and even resistance to weather change.

The best option for the novice is pine. Inexpensive, durable and durable, it is easily cut and processed. Other conifers are suitable. True, experts do not recommend using spruce, too much fibers and bitch in it, it is worse than working.

Hardwood boards, including linden, oak and cherries, although they are famous for their longevity, but they are expensive. Yes, and it may not work with them, you need to know the technique.

If you have no equipment for woodworking, buy a cutting board. Moreover, the higher the variety of wood, the better, there will be no bitch and chips on it. For deaf and through products, choose boards with a thickness of at least 30 mm, and for overheads enough and 10 mm.

The sawn timber must be a chamber type of drying with humidity from 10% to 12%. Such a tree is less prone to deformation due to temperature differences, rain or snow.

List of tools that will be needed for the manufacture of through lambrequin

• Drill with various drills
• Electrolzik (it is better to use a small-dimensional peeling, so that the propyl turned out to be neat, not torn)
• Sandpaper of different labeling
• Petal grinding disk
• Grinder machine

Stencils of wooden platbands on the windows: Learning to transfer to the board

For the manufacture of lambrequin with a simple geometric pattern, the stencil will not need. You can create a pattern right on the board. However, more complex ornaments require painstaking work. You can draw them on your own or draw, if you have artistic skills, or find a finished ornament: pattern templates are presented below.

Of course, just download the liked drawing is not enough. To transfer to the board, it must be scaled. How to do it?

1. The easiest way is to scale on printing or when copying. But, alas, the image will lose quality. And, if initially the picture had not the highest resolution, this method is hardly suitable.
2. Use a graphic editor, such as CoralDraw, which has a trial free version. Read more about how to do it, look at the video.
3. Finally, the most traditional way is to use millimeter paper. To do this, the original image must be divided into squares.

Through thread involves repeated use of the stencil. So it is best to print a ready-made pattern on cardboard.

To transfer the drawing to the board, circle it with a handle or pencil. Well, for convenience, stitching areas that will be cut subsequently.

How to make online windows in a wooden house

1. Remove the measurements from the window to determine the length and width of the platband. Stencil should be placed on the board with a margin.
2. Slightly treat the wood with sandpaper, remove roughness and bitch.
3. Copy the drawing from the cardboard onto the board. Pay attention to the details, the lines must be clear and neat. No need to duplicate and circle stencil several times, especially over after the previous line. Indicate parts to be removed.
4. The edge begins with the slots inside the lambrequin. To do this, you need to do the holes with the drill in it. You can use the drills of various sizes - depending on the reverseage itself. The main thing is that the drill is directed strictly vertically!
5. Lobzik cut the pattern. It is important not to cross and do not touch the line. Small unnecessary parts coming to the contour, later correct manually.
6. After that, you can proceed to the outer part of the lambrequin. As a rule, through platbands have only one curly edge. It is treated with a jigsaw. Periodically make perpendicular rods to remove the unnecessary part of the wood. It is also not worth touching the line, try to work carefully so that the pattern is symmetrical and the same.
7. It turned out a rough version of the ticket. Grinding and polishing will help bring it into order. Faster and easier to handle the part with a grinding machine. It is used on flat surfaces, and a drill with a petal disk - in the holes. But you can pass off the product and manually abrasive paper of different labeling.
8. Wipe the detail with a wet towel or walk the vacuum cleaner to remove wood dust.
9. At the final stage, wood is soaked, covered with paint and varnish.

Attach the finished product using nails. Place them in the least noticeable places, completely drowned the hats in the wood.

You can glue the item to the frame background on the deaf spikes. The nail itself is installed in the product, and the hole is drilled in the frame. They are connected with a small amount of glue. Thus, you save the aesthetics of cash and secure it from moisture.

This video presents the process of manufacturing a simple geometric platband.